资源目录
压缩包内文档预览:
编号:116809196
类型:共享资源
大小:1.74MB
格式:ZIP
上传时间:2021-03-06
上传人:QQ14****9609
认证信息
个人认证
郭**(实名认证)
陕西
IP属地:陕西
50
积分
- 关 键 词:
-
壳体
注塑
模具设计
注射
CAD
- 资源描述:
-
壳体的注塑模具设计-注射模含6张CAD图,壳体,注塑,模具设计,注射,CAD
- 内容简介:
-
摘 要本文介绍了壳体塑料模具的设计过程。本设计对塑件在模具中的位置和分型面位置、选择浇注系统与排气系统、成型零件的结构、合模导向机构、推出机构、温度调节系统的设计方案做了充分的论证,并优化选取最合理的设计方案。带有脱模斜度的孔,则利用塑件的脱模斜度替代侧抽芯,简化了模具结构。通过对型芯支承板和型腔板的计算,保证了模具的正常使用,优化了模具的结构设计,使得模具结构紧凑。关键词:注射模;挤出模;浇口套;排气槽;分型面;推杆。AbstractThis paper introduces the design process of shell plastic mold. In this design, the position of plastic parts in the mold and parting surface position, the selection of gating system and exhaust system, the structure of molding parts, mold closing guide mechanism, ejection mechanism, temperature control system are fully demonstrated, and the most reasonable design scheme is optimized. For the hole with demoulding slope, the side core pulling is replaced by the demoulding slope of the plastic part, which simplifies the die structure. The structure of the cavity and the support plate of the mould are optimized by the calculation.Key words: injection mold; extrusion mold; gate sle
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。