H3CMSR930系统固件恢复Word版

1、传播优秀word版文档 ，希望对您有帮助，可双击去除！h3c msr 930 系统恢复1配置计算机ip地址并关闭系统防火墙将计算机的ip地址更改为10/24 ，关闭系统防火墙。2安装配置tftp软件安装3com的tftp软件，并安装下图位置进行配置。将h3c msr 930路由器的系统固件放到tftp服务器的指定目录。传播优秀word版文档 ，希望对您有帮助，可双击去除！3检查串口设备，并做相应的设置。按照下图设置com接口。传播优秀word版文档 ，希望对您有帮助，可双击去除！4启用secretcrt，选择串口连接5线路连接consol线连接电脑串口，电脑网线连接路由器

2、的ge0口（wan）6以下是设备升级的具体操作system is starting.press ctrl+d to access basic-bootware menudo you want to check sdram? y/nbooting normal extend bootwarethe extend bootware is self-decompressing.done!* * h3c msr930 bootware, version 5.10 * *copyright (c) 2004-2015 hangzhou h3c technologies co., ltd.传播优秀word

3、版文档 ，希望对您有帮助，可双击去除！compiled date : dec 21 2015cpu type : p1010cpu l1 cache : 32kbcpu l2 cache : 256kbcpu clock speed : 533mhzmemory type : ddr3 sdrammemory size : 256mbmemory speed : 667mhzbootware size : 1024kbflash size : 128mbcpld version : 1.0pcb version : 3.0bootware validating.application prog

4、ram does not exist.bootware password: not required. please press enter to continue.password recovery capability is enabled.note: the current operating device is flashenter < storage device operation > to select device.=<extend-bootware menu>=|<1> boot system |<2> enter serial

5、 submenu |<3> enter ethernet submenu |<4> file control |<5> restore to factory default configuration |<6> skip current system configuration |<7> bootware operation menu |<8> clear super password |<9> storage device operation |<0> reboot |=ctrl+z: acces

6、s extend-assistant menuctrl+f: format file systemctrl+c: display copyrightenter your choice(0-9): 3 进入以太网子菜单=<enter ethernet submenu>=|note:the operating device is flash |<1> download application program to sdram and run |<2> update main application file |<3> update backup ap

7、plication file |传播优秀word版文档 ，希望对您有帮助，可双击去除！|<4> update secure application file |<5> modify ethernet parameter |<0> exit to main menu |<ensure the parameter be modified before downloading!> |=enter your choice(0-5): 5 修改以太网配置=<ethernet parameter set>=|note: '.' =

8、 clear field. | '-' = go to previous field. | ctrl+d = quit. |=protocol (ftp or tftp) :tftp tftp 选择协议tftpload file name :msr93x-cmw520-r2513p21.bin :msr93x-cmw520-r2516p02.bin 系统文件的名称（和d:tftp下的文件名称一致）target file name :msr93x-cmw520-r2513p21.bin :msr93x-cmw520-r2516p02.bin 保存到路由器的系统文件名称server

9、 ip address :2 10 计算机的ip地址local ip address :3 路由器的ip地址gateway ip address : 网关不用配置=<enter ethernet submenu>=|note:the operating device is flash |<1> download application program to sdram and run |<2> update main application file

10、|<3> update backup application file |<4> update secure application file |<5> modify ethernet parameter |<0> exit to main menu |<ensure the parameter be modified before downloading!> |=enter your choice(0-5): 2 这里升级主程序文件loading.done!32574464 bytes downloaded!传播优秀word版文档

11、，希望对您有帮助，可双击去除！updating file flash:/msr93x-cmw520-r2516p02.bin.done!=<enter ethernet submenu>=|note:the operating device is flash |<1> download application program to sdram and run |<2> update main application file |<3> update backup application file |<4> update secure

12、application file |<5> modify ethernet parameter |<0> exit to main menu |<ensure the parameter be modified before downloading!> |=enter your choice(0-5): 0 这里升级完成，需要返回主菜单=<extend-bootware menu>=|<1> boot system |<2> enter serial submenu |<3> enter ethernet su

13、bmenu |<4> file control |<5> restore to factory default configuration |<6> skip current system configuration |<7> bootware operation menu |<8> clear super password |<9> storage device operation |<0> reboot |=ctrl+z: access extend-assistant menuctrl+f: format

14、 file systemctrl+c: display copyrightenter your choice(0-9): 1 升级完成，重启设备starting to get the main application file-flash:/msr93x-cmw520-r2516p02.bin!.the main application file is self-decompressing.done!传播优秀word版文档 ，希望对您有帮助，可双击去除！system application is starting.startup configuration file does not exis

15、t.it will take a long time to get configuration file, please wait.retrieving configuration file failed!user interface aux0 is available.到目前为止，系统已经恢复完毕，并且新系统已经启动。press enter to get started.<h3c>#jan 1 00:01:15:249 2012 h3c shell/4/login: trap .4.1.2550.<hh3clogin>: lo

16、gin from console%jan 1 00:01:15:249 2012 h3c shell/5/shell_login: console logged in from aux0.<h3c><h3c>system-view 进入系统视图system view: return to user view with ctrl+z. h3cdisplay current-configuration 查看系统当前配置信息# version 5.20, release 2516p02 当前系统的版本信息# sysname h3c# domain default enable

17、 system# dns proxy enable# telnet server enable# dar p2p signature-file flash:/p2p_default.mtd# ndp enable# ntdp enable# cluster enable# port-security enable#传播优秀word版文档 ，希望对您有帮助，可双击去除！ password-recovery enable#vlan 1 #domain system access-limit disable state active idle-cut disable self-service-url

18、 disable#dhcp server ip-pool vlan1 extended network ip range 54 network mask gateway-list dns-list #user-group system group-attribute allow-guest#local-user admin password cipher $c$3$40gc1cxf/wijna1uffpjsjkaof+qp5av authorization-attribute level 3 service-type telnet service-type web#cwmp undo cwmp enable#interface aux0 async mode flow link-protocol ppp#interface cellular0/0 async mode proto