PPT时钟动画制作教程

1、Wuhan intelligent elevator co production workshop and warehouse steel structures at the donghu development zone, Wuhan University Science and Technology Park, Park Road. 1, an area of the steel: production workshop is 7344.00 square meters; finished goods warehouse is 1036.80 square meters. 2, light

2、 steel structure fabrication and installation costs of the project are: 4.35 million Yuan. 3, the project designed by Wuhan Polytechnic Institute, Zhejiang, the light steel structure limited the production and installation of steel structures. 4, the installation period of the project is: 70 days (w

3、orkshop and warehouse were 70 days). 5, the technology requirements for the production and installation of engineering and construction quality, duration control, supervision of contract performance commissioned by the owners corporation and Zhejiang, the Palace to complete steel structure, a QC, an

4、d monitor in real time to ensure the completion of the project according to the quality and quantity. This project by the Zhejiang plant production system to do immediately after the steel structure, organized by the Engineering Department for field installation. Design and production based on insta

5、llation procedure the project by Wuhan Polytechnic Institute of design, Zhejiang, the steel structure, based on intelligent elevator company and Wuhan steel, signed production and installation contract for production of detail design. Quality acceptance code for architectural design of light steel s

6、tructure and construction profiles: 1, GB50092001 2, of the structural specification of the building code for seismic design of GB500112001 3, GB500172003 4, of the code for design of steel structure of the standard specification for coldformed thinwalled steel structure GB500182002 5, the steel str

7、ucture project construction quality approval standard GB502052001 6, the Specification for construction and acceptance of steel structure design of highstrength bolt connection JGJ8291 7, the technicalspecification for steel structure welding JBJ812002 8, the technical specification for steel struct

8、ure of doorlike steel frame light house CECS1022002 material selecting overview support section: production workshop roof pitch i=5%. Finished products warehouse roof slope of 8%. Roof: a single layer Board + insulation wool + steel wire mesh roof plate with 0.50mm blue HXY820 color steel plate alum

9、inumplating zinc. thick fiberglass insulation cotton with 75mm density 12Kg per cubic metre. Wall surfaces (workshop): double Board + insulation cotton, outer wall surface with 0.50mm white galvanized HXY840 color steel plate, wall plate white galvanized HXY900 0.40mm color steel plate, uses 50mm fi

10、berglass insulation cotton, density 12Kg per m3. Part of the main structure: steel column correction after his time on column bottom and base top surface gaps without the secondary water shrinkage of fine stone concrete. Steel columns, beams, frames, beams, columns, a wind column, traffic beam mater

11、ial Q345B. mechanical properties and chemical composition are in line with the GB/T159194 provision of the lowalloy structural steel. Brace, knee brace . Surface protection of steel structure paint according to the contract, be dealt with separately. Located ± 0.000 2% NaN02 steel surface coati

12、ng cement weight cement mortar, and C10 concrete packags to 0.15M, package thickness of 100 feet of concrete. Steel structure installation overview: installation and acceptance of steel structure should be carried out according to the GB502052001, strict construction quality and construction of the

13、installation order. Single component production after the immediate classification number should be placed, it is forbidden to place. Structure before installing the widget should be a comprehensive inspection, such as member number, length, perpendicularity, flatness, it meets the design requiremen

14、ts and specifications. Structure lifting and appropriate measures should be taken to prevent excessive torsion deformation of components. Main steel frame installed, grasp the rope should be set up in time, and support system in place before they can remove temporary installation and adjustment rang

15、e Rover wind rope. All round support should finally install regulated tension. All the superstructure must be installed in the lower part of the structural adjustment in place and fix the following. Higstrength bolt connections within the contact surface using sandblasting process and components, no

16、t brushing paint or defaced.PPT时钟动画制作教程 PPT是微软办公系列一款强大的软件，用于交流时演示观点。在演示中若能配以合适的动画，效果会更好。本文档演示如何制作时钟动画，一些资料参考网上和自己平时的经验体会。技术含量不高，旨在拓展大家的思路，盘活我们的创造性思维，没有做不到，只有想不到。 下面分步骤展示制作过程 1、画一大一小两个圆，大的用蓝色填充、置于底层，小的用白色填充，然后把两个圆同心叠放，选择组合。 全选，右键选择组合。ctrl+a2、在幻灯片上插入文本框，添加时间字体。再 个，并更改填充颜色。”“”“、3在自选图形中的箭头总汇中的上箭头做为表针，将该

17、箭头复制1并按图中位置放置，两个箭头一起选中，右键，组合在一起。Wuhan intelligent elevator co production workshop and warehouse steel structures at the donghu development zone, Wuhan University Science and Technology Park, Park Road. 1, an area of the steel: production workshop is 7344.00 square meters; finished goods warehouse is

18、 1036.80 square meters. 2, light steel structure fabrication and installation costs of the project are: 4.35 million Yuan. 3, the project designed by Wuhan Polytechnic Institute, Zhejiang, the light steel structure limited the production and installation of steel structures. 4, the installation peri

19、od of the project is: 70 days (workshop and warehouse were 70 days). 5, the technology requirements for the production and installation of engineering and construction quality, duration control, supervision of contract performance commissioned by the owners corporation and Zhejiang, the Palace to co

20、mplete steel structure, a QC, and monitor in real time to ensure the completion of the project according to the quality and quantity. This project by the Zhejiang plant production system to do immediately after the steel structure, organized by the Engineering Department for field installation. Desi

21、gn and production based on installation procedure the project by Wuhan Polytechnic Institute of design, Zhejiang, the steel structure, based on intelligent elevator company and Wuhan steel, signed production and installation contract for production of detail design. Quality acceptance code for archi

22、tectural design of light steel structure and construction profiles: 1, GB50092001 2, of the structural specification of the building code for seismic design of GB500112001 3, GB500172003 4, of the code for design of steel structure of the standard specification for coldformed thinwalled steel struct

23、ure GB500182002 5, the steel structure project construction quality approval standard GB502052001 6, the Specification for construction and acceptance of steel structure design of highstrength bolt connection JGJ8291 7, the technicalspecification for steel structure welding JBJ812002 8, the technica

24、l specification for steel structure of doorlike steel frame light house CECS1022002 material selecting overview support section: production workshop roof pitch i=5%. Finished products warehouse roof slope of 8%. Roof: a single layer Board + insulation wool + steel wire mesh roof plate with 0.50mm bl

25、ue HXY820 color steel plate aluminumplating zinc. thick fiberglass insulation cotton with 75mm density 12Kg per cubic metre. Wall surfaces (workshop): double Board + insulation cotton, outer wall surface with 0.50mm white galvanized HXY840 color steel plate, wall plate white galvanized HXY900 0.40mm

26、 color steel plate, uses 50mm fiberglass insulation cotton, density 12Kg per m3. Part of the main structure: steel column correction after his time on column bottom and base top surface gaps without the secondary water shrinkage of fine stone concrete. Steel columns, beams, frames, beams, columns, a

27、 wind column, traffic beam material Q345B. mechanical properties and chemical composition are in line with the GB/T159194 provision of the lowalloy structural steel. Brace, knee brace . Surface protection of steel structure paint according to the contract, be dealt with separately. Located ± 0.

28、000 2% NaN02 steel surface coating cement weight cement mortar, and C10 concrete packages to 0.15M, package thickness of 100 feet of concrete. Steel structure installation overview: installation and acceptance of steel structure should be carried out according to the GB502052001, strict construction

29、 quality and construction of the installation order. Single component production after the immediate classification number should be placed, it is forbidden to place. Structure before installing the widget should be a comprehensive inspection, such as member number, length, perpendicularity, flatnes

30、s, it meets the design requirements and specifications. Structure lifting and appropriate measures should be taken to prevent excessive torsion deformation of components. Main steel frame installed, grasp the rope should be set up in time, and support system in place before they can remove temporary

31、 installation and adjustment range Rover wind rope. All round support should finally install regulated tension. All the superstructure must be installed in the ower part of the structural adjustment in place and fix the following. Higstrength bolt connections within the contact surface using sandbla

32、sting process and components, not brushing paint or defaced. 无线条颜色设置为“”填充色设置为“无填充颜色，双击设置最下的箭头，4、选中下面的箭头，这样我们的时针就做好了。线条颜色” 、将做好的时针放到表盘的中间。5 为：强调动作效果，添加自定义动画、选中时针，选择6“”“”->陀螺旋。 Wuhan intelligent elevator co production workshop and warehouse steel structures at the donghu development zone, Wuhan Uni

33、versity Science and Technology Park, Park Road. 1, an area of the steel: production workshop is 7344.00 square meters; finished goods warehouse is 1036.80 square meters. 2, light steel structure fabrication and installation costs of the project are: 4.35 million Yuan. 3, the project designed by Wuha

34、n Polytechnic Institute, Zhejiang, the light steel structure limited the production and installation of steel structures. 4, the installation period of the project is: 70 days (workshop and warehouse were 70 days). 5, the technology requirements for the production and installation of engineering and

35、 construction quality, duration control, supervision of contract performance commissioned by the owners corporation and Zhejiang, the Palace to complete steel structure, a QC, and monitor in real time to ensure the completion of the project according to the quality and quantity. This project by the

36、Zhejiang plant production system to do immediately after the steel structure, organized by the Engineering Department for field installation. Design and production based on installation procedure the project by Wuhan Polytechnic Institute of design, Zhejiang, the steel structure, based on intelligen

37、t elevator company and Wuhan steel, signed production and installation contract for production of detail design. Quality acceptance code for architectural design of light steel structure and construction profiles: 1, GB50092001 2, of the structural specification of the building code for seismic desi

38、gn of GB500112001 3, GB500172003 4, of the code for design of steel structure of the standard specification for coldformed thinwalled steel structure GB500182002 5, the steel structure project construction quality approval standard GB502052001 6, the Specification for construction and acceptance of

39、steel structure design of highstrength bolt connection JGJ8291 7, the technicalspecification for steel structure welding JBJ812002 8, the technical specification for steel structure of doorlike steel frame light house CECS1022002 material selecting overview support section: production workshop roof

40、pitch i=5%. Finished products warehouse roof slope of 8%. Roof: a single layer Board + insulation wool + steel wire mesh roof plate with 0.50mm blue HXY820 color steel plate aluminumplating zinc. thick fiberglass insulation cotton with 75mm density 12Kg per cubic metre. Wall surfaces (workshop): dou

41、ble Board + insulation cotton, outer wall surface with 0.50mm white galvanized HXY840 color steel plate, wall plate white galvanized HXY900 0.40mm color steel plate, uses 50mm fiberglass insulation cotton, density 12Kg per m3. Part of the main structure: steel column correction after his time on col

42、umn bottom and base top surface gaps without the secondary water shrinkage of fine stone concrete. Steel columns, beams, frames, beams, columns, a wind column, traffic beam material Q345B. mechanical properties and chemical composition are in line with the GB/T159194 provision of the lowalloy struct

43、ural steel. Brace, knee brace . Surface protection of steel structure paint according to the contract, be dealt with separately. Located ± 0.000 2% NaN02 steel surface coating cement weight cement mortar, and C10 concrete packages to 0.15M, package thickness of 100 feet of concrete. Steel struc

44、ture installation overview: installation and acceptance of steel structure should be carried out according to the GB502052001, strict construction quality and construction of the installation order. Single component production after the immediate classification number should be placed, it is forbidd

45、en to place. Structure before installing the widget should be a comprehensive inspection, such as member number, length, perpendicularity, flatness, it meets the design requirements and specifications. Structure lifting and appropriate measures should be taken to prevent excessive torsion deformatio

46、n of components. Main steel frame installed, grasp the rope should be set up in time, and support system in place before they can remove temporary installation and adjustment range Rover wind rope. All round support should finally install regulated tension. All the superstructure must be installed i

47、n the lower part of the structural adjustment in place and fix the following. Higstrength bolt connections within the contact surface using sandblasting process and components, not brushing paint or defaced. ”“效果选项“组合25”，选中7、右键点击动画列表的 8、在计时标签下，设置如下： 开始：之前 秒延时：0 此处手动输入，注意冒号为英文输入法下面的符号 12:00:00速度：秒()

48、重复：直到下一次点击Wuhan intelligent elevator co production workshop and warehouse steel structures at the donghu development zone, Wuhan University Science and Technology Park, Park Road. 1, an area of the steel: production workshop is 7344.00 square meters; finished goods warehouse is 1036.80 square meters

49、. 2, light steel structure fabrication and installation costs of the project are: 4.35 million Yuan. 3, the project designed by Wuhan Polytechnic Institute, Zhejiang, the light steel structure limited the production and installation of steel structures. 4, the installation period of the project is:

50、70 days (workshop and warehouse were 70 days). 5, the technology requirements for the production and installation of engineering and construction quality, duration control, supervision of contract performance commissioned by the owners corporation and Zhejiang, the Palace to complete steel structure

51、, a QC, and monitor in real time to ensure the completion of the project according to the quality and quantity. This project by the Zhejiang plant production system to do immediately after the steel structure, organized by the Engineering Department for field installation. Design and production base

52、d on installation procedure the project by Wuhan Polytechnic Institute of design, Zhejiang, the steel structure, based on intelligent elevator company and Wuhan steel, signed production and installation contract for production of detail design. Quality acceptance code for architectural design of lig

53、ht steel structure and construction profiles: 1, GB50092001 2, of the structural specification of the building code for seismic design of GB500112001 3, GB500172003 4, of the code for design of steel structure of the standard specification for coldformed thinwalled steel structure GB500182002 5, the

54、 steel structure project construction quality approval standard GB502052001 6, the Specification for construction and acceptance of steel structure design of highstrength bolt connection JGJ8291 7, the technicalspecification for steel structure welding JBJ812002 8, the technical specification for st

55、eel structure of doorlike steel frame light house CECS1022002 material selecting overview support section: production workshop roof pitch i=5%. Finished products warehouse roof slope of 8%. Roof: a single layer Board + insulation wool + steel wire mesh roof plate with 0.50mm blue HXY820 color steel

56、plate aluminumplating zinc. thick fiberglass insulation cotton with 75mm density 12Kg per cubic metre. Wall surfaces (workshop): double Board + insulation cotton, outer wall surface with 0.50mm white galvanized HXY840 color steel plate, wall plate white galvanized HXY900 0.40mm color steel plate, us

57、es 50mm fiberglass insulation cotton, density 12Kg per m3. Part of the main structure: steel column correction after his time on column bottom and base top surface gaps without the secondary water shrinkage of fine stone concrete. Steel columns, beams, frames, beams, columns, a wind column, traffic

58、beam material Q345B. mechanical properties and chemical composition are in line with the GB/T159194 provision of the lowalloy structural steel. Brace, knee brace . Surface protection of steel structure paint according to the contract, be dealt with separately. Located ± 0.000 2% NaN02 steel sur

59、face coating cement weight cement mortar, and C10 concrete packages to 0.15M, package thickness of 100 feet of concrete. Steel structure installation overview: installation and acceptance of steel structure should be carried out according to the GB502052001, strict construction quality and construction of the installation order. Single component production after the immediate classification number should be placed, it is forbidden to place. Structure before installing the widget should be a comprehensiv