单叶片安装后的机舱二次

1、单叶片安装后的机舱二次安装Re-assembly of nacelle after singlade installation检查项目和规范：由现场填写已校准设备Calibrated equipment位置.nr设备描述（类型、名称等）Description of equipment(Type ,name,etc)设备校准号Equipment calibration number123456789101112在上面的列表中详列设备，随后使用该设备时参考其位置。Specify equipment in list above, and subsequently refer to theNo, wh

2、en the equipment is used客户/业主：Customer/owner:项目名称：Project Name：项目：Project No:风机：Turbine No.:参照作业指导书：ZWI 1042374Work Instruction:ZWI 1042374ECN 249036 PTL 2016.03.15Check-item and specification:To be filled in by the site已校准设备位置： Cal. equipment完成日期（日/月/年） Date completed安装 签字installer signature监督签字 Su

3、pervisor signature. no:11.1.发电机前面的单叶片去除左侧右侧1.1. Singlade platforms in front of generator removed。Left sideRight side21.2.安装临时制动盘盖1.2. Temporary brake disc covers mounted。31.3.轮毂内的单叶片安装去除1.3. Singlade installation platform in hub removed。41.4.小爬梯和HPU上软管卡箍再安装叶片A叶片B叶片C1.4. Small acs ladders and hose cl

4、s on HPU remounted。Blade A Blade B Blade C51.5.安装在主轴轴承上的栅栏1.5. Fence remounted on work platform on main bearing。61.6.重建起重机轨道系统为标准配置。 螺栓依据起重机轨道安装手册进行紧固。1.6. Crane rail system rebuilt to standard configuration。Bolts torqued according to crane rail manual备注：Remarks 全部完成，ZCH 完成。Completed, ZCH complete.监督员签字： 日期： Supervisor signatureDate安装签字： 日期： Installation Signature：Date备注:检查表必须在安装或调试过程阶段进行填写,严禁提前填写或后补,特此.Note: The checklist must be filled during the instal