雪铁龙维修 手册 图Removal - refitting automatic gearbox oil pressure sensor 307

B2CG82K3-31/12/2003-307

-AL4AUTOMATICGEARBOXREMOVAL-REFITTINGAUTOMATICGEARBOXOILPRESSURESENSOR1-REMOVAL:拆除：NOTE:Donotdrainthegearbox.注意：不需放掉自动变速箱油Disconnectthebattery.断开蓄电池SPECIALFEATURE:AL4AUTOMATICGEARBOXRemove:拆除：theECUcoverECU罩盖theconnectoroftheengineecuECU插接器thebattery蓄电池thebatterycontainer蓄电池支架theaircleanerhousing空气滤清器theairhose空气滤清器进气管Removethe2bolts(1)(mountingofthemodularconnectoronthegearbox).拆除2个螺栓1Disconnectthemodularconnector(2).拔掉线束模块2的插接器SPECIALFEATURE:AL4AUTOMATICGEARBOXExtractthegreen3-wayconnector(3)fromthemodularconnector(2).拔掉接线模块2上的绿色3通道插接器3Remove:拆除：thefrontleft-handwheel左前车轮thefrontleftmudshield左前挡泥板theoilpressuresensorharness(4)自动变速箱油压传感器4的线束the2oilpressuresensor(4)fixingbolts2个油压传感器4固定螺栓(4)automaticgearboxoilpressuresensor自动变速箱油压传感器42-REFITTING:安装：Replacethesensororing(4).更换新的油压传感器4的“O”型密封圈Fit:安装：(4)automaticgearboxoilpressuresensor自动变速箱油压传感器4the2oilpressuresensor(4)fixingbolts:tighteningtorque1da.Nm2个油压传感器4固定螺栓，拧紧力矩：10Nmtheoilpressuresensorharness(4)自动变速箱油压传感器4的线束thegreen3-wayconnector(3)inthemodularconnector(2)接线模块2上的绿色3通道插接器3the2bolts(1):tighteningtorque1.0da.Nm2个螺栓1，拧紧力矩：10NmReconnectthemodularconnector(2).连接接线模块2SPECIALFEATURE:AL4AUTOMATICGEARBOXFit:thebatterycontainerthebatterytheaircleanerhousingtheairhosethefrontleftmudshieldthefrontleft-