ABB传动调试软件DriveWindow介绍

1、DriveWindow 2,DriveWare,Introduction,DriveWindow is Windows Application for commissioning and maintaining ACS600, ACS800, ACS6000, ACS1000 and DCS600. Operating system Windows NT, Windows 2000, or Windows XP,Functions Control operations (start, stop, references, etc.) Monitoring signals in numerical

2、 and graphical format Parameters (changing values) Datalogger (controls, display) Fault Logger (display faults, controls) Back-up depend on selected Scaling Method, see previous slide. Display = Cofficient*ACT value + offset OR Display = 100 % with full signal range,Size of the buffer in seconds “Si

3、ze of the history behind the screen”,Sampling interval in ms “Size of the history”,Monitor mode:Normal or Fast Within the Normal mode min. sampling interval is 10ms within Fast-mode it is 1ms,Set y-axis minimum and y-axis maximum,=You can set at any time.,=You can set only when monitoring is cleared

4、.,=You can set when monitoring is stopped or paused,Length of the screen in seconds Change the length by double-click it, if it is necessary,Monitor: Operating,1.Add/remove monitored items 2.Start or continue monitoring 3.Stop monitoring 4.Pause monitoring 5.Clear monitor,Select START,Select STOP or

5、 PAUSE,Print out,Export data in numerical form e.g. into the Excel-program,Copy Graph into the Clipboard,Open a saved graph file in the offline mode,Save the graphs to the file,Graph file comment,Graph Preferences: scaling method ,how graphs are shown etc.,Workspace,Change the preferences for worksp

6、ace save Two scaling methods available. Same method selected for Monitoring and Datalogger from FILE-menu:Graph/Preferences. Change the scale by double-click channel number.,DATALOGGER: Settings,Select the new signal by the mouse,Add the signal into the datalogger. Repeat points 2 and 3 with all four channels. Note! You cannot specify used channel. DriveWindow defined used channel automatically,Start datalogger,When FILLED, upload data,DATALOGGER: Example,Delete existing signals from Datalogge