300公斤餐梯不验收报价书.doc

1、measures planned implementation of technical protection measures and security schemes, the problems should be promptly reported to the Manager. 37th: carbon supervisor leadership and head of the company should periodically check the anti-accident measures planned, security technology protection meas

2、ures planned in implementation of measures against accidents and guarantee schemes, security technology protection measures planned in implementation. Seventh article 38th of education and training: new factory (company) production staff (including internships, commissioned officer), must be approve

3、d by the factory (company), workshop and team level safety education upon passing the examination before entering production site. Tertiary-level education after card registration, by the companys production technology section recovery archive, and reported to the company trade unions, safety record

4、. Training and examinations including the safe work procedures as well as relevant safety regulations, work environment and jobs there are risk factors, preventive measures and emergency treatment, and so on. The 39th article: new producers must receive the following training and qualified posts: (a

5、) the operating personnel, scheduling, must pass through the field point, institutional learning, on-site training and classes practice; (B) the maintenance, including technical staff, must undergo maintenance, technical specifications for learning and class practice; (C) special operations personne

6、l, must pass the national professional training, after obtaining a special operations qualifications before they can post. 40th: on-the-job training of production personnel: (I) post production staff should regularly carry out targeted of technical questions and answers, an accident expected on site

7、 training and anti-accident; (B) from running post 1 month and above the main post on duty or leave transportation . Drive system and security studies, arranged by upper management or organization of the examination. The 42nd article: June of every year once regulatory and safety procedures of the c

8、ompany system of examinations, examination the failed again, still not eligible waiting list study. Article 43rd: every year in June the work ticket issuer, assignee, licensee of work training, after passing the examination, as a formal announcement are eligible to work as ticket issuer, head of ins

9、pection, work permits and the right to a separate high-pressure equipment list, and reported to the Management Department. Failing the exam may not serve as a two person, stop classes, examinations before they can post. 44th: for breach of discipline system caused the accident, a kind of disorder an

10、d attempted serious responsibility for the accident, in addition to the relevant provisions dealing with should also be tasked to learn about a point system, and after passing the exam, before they can post. Article 45th: units of the company using the security video, slide projector, television, co

11、mputer, multimedia, radio, Billboard, artifacts, photo exhibitions, as well as security knowledge exam, lectures, contests, and other forms of advocacy, popularize the knowledge of security technology, targeted, Visual training, enhancing workers safety awareness and self-protection ability. Article

12、 46th销售报价河北博菱电梯有限公司河北博菱电梯有限公司河北博菱电梯有限公司时：2014年12月 17日 自：河北博菱电梯有限公司事：电梯报价及技术说明非常荣幸有机会能和贵单位合作，同时感谢您对河北博菱电梯有限公司的信任与厚爱，我公司愿为您提供周到服务。河北博菱电梯有限公司是从事研究、设计、制造各种型号杂物电梯的专业企业，以生产杂物电梯、别墅电梯为主。公司生产的BLTWJ型杂物电梯，为框架结构，用户设计井道不必预埋支架，无需专用机房；还可以根据用户的建筑结构不同，生产非标准杂物电梯。根据贵公司所需电梯种类，我公司提供如下报价，供您参考。河北博菱电梯有限公司BLTWJ型系列杂物电梯报价及技术说

13、明 1.电梯基本参数：电梯型号：BLTWJ型层站及门：3层3站3门 3轿门 载 重 量：300 kg 台 数： 1 台速 度： 0.4 m/s 驱动方式：交流单速开门方式: :1层门和轿门为：单扇铡刀门， 2 3层门为： 垂直中分手动门控制方式：门外按钮轿厢规格：宽1000mm深1000mm高1200mm控制系统：微机控制系统 开门宽度：1000mm1200mm 井 道 尺： 1900 mm 1500 mm提升高度：用户提供 材质：发纹不锈钢2. 产品价格 设备总价：￥35000 元 （此款为工作台式即放餐盘型） 注：此价格只包括电梯设备费、安装费、运费、维保费，不包括其它费用。 3.电梯主要

14、部件配置： 曳引机：华阳电梯曳引机厂生产的杂物电梯曳引机。 控制柜：微机控制柜为河北博菱电梯有限公司开发的BL-4微机控制柜，其中微机采用中央处理器，无触点控制，自动平层功能，故障自诊断功能。主导轨： T50型 门滑道：采用专用铝型材滑道l 轿厢、厅门、轿门：采用发纹不锈钢板，操纵盘采用微动式防水按钮，轿厢位置显示器为数码显示，操纵面板简洁使用、功能齐全、设有呼梯防水按钮，到站及上下行数码指示，显示清晰直观，便于用户使用。4电梯设计制造标准a 曳引机符合GB75882003中电梯制造与安装规范；b 电梯主要参数符合GB251942010杂物电梯制造与安装安全规范；c 电梯设计制造符合GB/T7

15、0251997和GB/T100581997等国家电梯及相关标准。5.付款条件 a. 支付给方式：预付总款30%，提货前再付总款70%。b. 交货期：签定供货合同并收到合同规定金额后，配合客户要求按期发货；c. 有效期：30天（报价有效期后需重新报价）。河北博菱电梯有限公司电梯系统性能特点与功能简介一.控制系统性能特点1.采用全数字BL-4微机控制，实现了快速实时响应及高可靠性。2.硬件结构标准化，通用性强。在统一的基本硬件结构上，只需更换软件，就能实现不同楼层要求的控制；3.具备完善的故障自诊断功能。4.免维护、免调试、安装方便、轻松实现旧梯改造；5.采用高可靠性抗干扰电源，受电网波动影响小（

16、电波动范围：-20%+10%）；二.功能简介1. 关门到位提示功能；2. 忘记关门提示功能；3. 相序检测、断、错相保护功能；4. 呼梯显示功能；5. 上下行箭头指示，数码显示；6. 开门显示；急停显示；7. 到站提示，自动平层功能；8. 电梯故障自诊断功能；9. 限位保护，缓冲器保护，电梯井道底部正下方有人能达到的空间设有安全钳，限速器；10. 控制柜设有急停开关，检修开关，上下行点动接触功能。电梯配置表部件名称参数属地轿厢不锈钢1.0mm（实厚）广州联众一级板厅门不锈钢1.0mm（实厚）广州联众一级板轿门不锈钢1.0mm（实厚）广州联众一级板曳引机300kg华阳电机 3.0kw配套控制柜2

17、-4层 河北博菱控制柜配件接触器KMGMC-9韩国LG接触器KMSKMXGMC-9韩国LG继电器KXJ2欣灵主板LG-4河北博菱继电器K24-K6JW2SN-DC12松下继电器K1-K23ALD112松下端子XT0TBR-30台湾天德端子XT1CZ-8500万捷端子XT2CZ-8500万捷芯片U1AT89C55埃特梅尔芯片U2ULN2003日本东芝芯片U3、U4ULN2803日本东芝空开Q1DZ108-20德力西芯片U5HEF4511荷兰飞利浦变压器PE5420D北京耀华数码管L1LG3611AH上海科达控制柜配件数码管L1LG3611BH上海科达晶振X115M北京光耦T1-T18PC817日

18、本夏普稳压芯片V1L7805美国ST稳压芯片V2LM2575-ADJ美国国办磁柱开关12V博菱电梯曳引绳8(mm)江苏南通井道立柱505()天津主导轨T50型 山西注：电梯井道底部正下方有人能达到的空间才带安全钳和限速器。 河北博菱电梯有限公司质量保证措施严格的技术程序和组织措施：河北博菱电梯有限公司生产的杂物电梯， 严格遵守GB7588-2003和GB25194-2010的标准要求，该体系覆盖电梯的设计、开发、生产、安装和服务的全过程，使公司的电梯产品在安全性和通用性方面得到了有效保障。设计环节包括：设计输入、设计输出、设计评审、设计验证、设计确认、设计更改。对产品质量，公司主要采取以下措施

19、：1.建立对产品的检验和试验控制程序对产品的检验计划、规程并坚持执行。产品检验计划、规程有详细的规定并开展的检验和试验活动要求和建立记录；各项检验和试验均按检验计划、规程规定执行。产品从进货检验和试验、过程检验和试验、最终检验和试验、检验和试验记录都按质量手册执行。2.建立检验和试验状态控制程序并坚持按其中的规定要求对检验和试验 状态进行标识和控制。从进货接收、生产过程直到最终检验和试验均对本公司产品的检验和试验状态按规定方法和部位进行标识。3.建立不合格品控制程序坚持对不合格品进行标识、记录、评价、隔离、处置并通知有关部门。4.建立纠正和预防措施程序并坚持执行。对实际发生的不合格或潜在不合格

20、的原因，是否采取相应的纠正或预防措施，进行经济性、风险性和重要性分析后再生产。 河北博菱电梯有限公司regular issuance system of internal and external accident cases, organizational learning, analysis and discussion on a regular basis, and educate the persons concerned in a timely manner. 47th article: strengthening the safety of staff, establishing

21、the concept of legalization of production safety, establish a people-oriented concept, three do no harm (dont hurt yourself, no harm to others, not to be hurt). 48th eighth day routine: pre-shift and post-shift monitor organizations, safety assist. Before class: succession (started), combined with s

22、hift operation and tasks for better risk analysis, arranged security account considerations. After class: summarizing comment on duty and the security situation, praise good deeds criticism ignored safety, illegal operations and other adverse phenomena, and completes the record. 49th: safety day eve

23、nt organized by the monitor, safety help, workshop leaders and checking activities. Classes (groups) or rotating a safety day event a week, activities to learn more about the superior file and the spirit of the meeting, informed of the accident, analysis of the company, workshop and fewer security i

24、ncidents, as well as the typical illegal team, analysis of operation environment, there may be a risk factor for the main content. 50th: security analysis companies every quarter of a security analysis; shop at least once a month analysis, comprehensive analysis of production trends, sum up lessons

25、learned from and the weakness in safety management, accident prevention measures in the study. Meeting was chaired by enterprise security responsibility, concerning the participation of Heads of Department, workshop. Formation meeting and made public. 51st: security check for carbon companys periodi

26、c and non-periodic safety checks should be carried out. Periodic inspection includes fall and spring security checks, security checks should be combined with spring or autumn season characteristics and accident law . 52nd: security analysis companies should all be actively involved in the preparatio

27、n of security advisories, bulletins, integrated security, analysis of accident law, drawing on lessons learned from. 53rd: the companys safety safety month activities each year according to the Governments requirements and deployment of the group, safety month activities focus on advocacy efforts to improve production safety and strengthen company-wide awareness of work saf