关 键 词：

136 FM 摩托车 发动机 装配线 设计

资源描述：

136FM摩托车发动机装配线设计,136,FM,摩托车,发动机,装配线,设计

内容简介：

南京理工大学泰州科技学院毕业设计说明书(论文)作 者:朱晓波学 号：05010159系部:机械工程系专 业:机械工程及自动化题 目:136FM摩托车发动机装配线设计高工曲波指导者： 评阅者： 2009 年 6 月毕业设计说明书（论文）中文摘要发动机装配线是对发动机顺序装配的流水线工艺过程，由于装配工艺的好坏直接影响产品质量，装配线在整个生产过程中占有重要地位。因此，发动机装配线是否合理，直接影响了摩托车质量和产量。根据毕业设计任务书上的设计要求及通过对本课题的研究，针对实验室教学的场地限制，在查看已有文献的基础上，设计整套摩托车发动机的装配线。使之既符合本校实际教学需要。首先完成装配线线体的设计。在线体的选择上充分考虑了本校的实际情况。在此基础上，设计了与装配线线体相匹配的随行夹具。通过连接转轴把U形托架与安装板连接。采用这种方式能够方便发动机的安装，容易替换，而且简易方便，制造成本低，通用性好。关键词 装配线设计 随行夹具 发动机工艺 毕业设计说明书（论文）外文摘要Title The Assembly line Design of 136FM Engine of Motocycle AbstractThe engine assembly line is to the engine order assembly assembly line technological process, because the assembly craft quality direct influence product quality, the assembly line holds the important status in the entire production process.Therefore, is the engine assembly line whether reasonable, has affected the motorcycle quality and the output directly.According to the graduation project project description in design request and through to this topic research, in view of the laboratory teaching location limit, had in the literature foundation in the examination, designs the entire wrap motorcycle engine the assembly line.Causes it already to conform to this school field research need.First completes the assembly line line body the design.The online body choice has fully considered this school actual situation.In this foundation, has designed the retinue jig which matches with the assembly line line body.Switches through the spindle holder U shape bracket and the mounting panel connection through the company.Selects this method to be able to facilitate the engine the installment, easy to replace, moreover simple convenient, the production cost is low, the v