yum安装第三方软件配置good

Centos6.0使用第三方 YUM源（EPEL， RPMForge，RPMFusion）yum是centos下很方便的rpm包管理工具，配置第三方软件库使你的软件库更加丰富。以下简单的讲下配置的步骤。首先，需要安装yum-priorities插件：yum install yum-priorities y该插件的作用主要是设置调用源时的优先级的，一般将官方的优先级设置为最高编辑CentOS-Base.repo 文件，用 vi编辑 ，如果不会操作，请百度 vi vi /etc/yum.repos.d/CentOS-Base.repo在每个段的最后加上priority=字段来设置每个镜像的优先级，1为最高，99为最低。一般的配置为: base, updates, extras priority=1CentOSplus,contrib priority=2然后保存二、下载与安装相应 EPEL 的 rpm 文件包安装epel.repo，下载地址为 /fedora/epel/6 /i386/ 或/pub 找与自己系统版本相符的包 (这一步只能自行下载 ! )#rpm -ivh /fedora/epel/6/i386/epel-release-6-7.noarch.rpm 32位 #rpm -ivh /fedora/epel/6/x86_64/epel-release-6-7.noarch.rpm 64位the following link is correct:rpm -ivh /epel/6/x86_64/epel-release-6-8.noarch.rpmrpm -import /etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6vi /etc/yum.repos.d/epel.repo设置 /etc/yum.repos.d/epel.repo 中源的级别为 priority=11（比上面高就行）。三、下载与安装相应 rpmforge 的 rpm 文件包 安装rpmforge.repo，下载地址为 /rpmforge-release/ 找与自己系统版本相符的包 wget /rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm 32位 wget /rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm 64位 wget /rpm/packages/RPM-GPG-KEY.dag.txt rpm -import RPM-GPG-KEY.dag.txt 或者 rpm -import http:/apt.sw.be/RPM-GPG-KEY.dag.txtrpm -K rpmforge-release-0.5.2-2.el6.rf.i686.rpm 32位 检查安装文件rpm -K rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm 64位 检查安装文件rpm -ivh rpmforge-release-0.5.2-2.el6.rf.i686.rpm 32位 安装程序rpm -ivh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm 64位 安装程序vi /etc/yum.repos.d/rpmforge.repo 设置 /etc/yum.repos.d/rpmforge.repo 文件中源的级别为 priority=12（比上面高就行）。四、下载与安装相应rpmfusion 的 rpm 文件包安装rpmfusion.repo,下载地址为 http:/download1.rpmfusion.or 32位安装rpm -ivh /free/el/updates/testing/6/i386/rpmfusion-free-release-6-0.1.noarch.rpm rpm -ivh /nonfree/el/updates/testing/6/i386/rpmfusion-nonfree-release-6-0.1.noarch.rpm64位安装rpm -ivh /free/el/updates/6/x86_64/rpmfusion-free-release-6-1.noarch.rpmrpm -ivh /nonfree/el/updates/6/x86_64/rpmfusion-nonfree-release-6-1.noarch.rpm/* rpm -ivh /nonfree(free?)/el/updates/testing/6/x86_64/rpmfusion-(non?)free-release-6-0.1.noarch.rpmrpm -ivh /nonfree/el/updates/testing/6/x86_64/rpmfusion-nonfree-release-6-0.1.noarch.rpm*/ vi /etc/yum.repos.d/rpmfusion-free-updates.repovi /etc/yum.repos.d/rpmfusion-free-updates-testing.repovi /etc/yum.repos.d/rpmfusion-nonfree-updates.repovi /etc/yum.repos.d/rpmfusion-nonfree-updat