棕榈油脂肪酸MSDS.doc

MATERIAL SAFETY DATA SHEETSECTION 1 : PRODUCT & IDENTIFICATIONMANUFACTURER:PT. JAYAKARTA NUSATAMAADDRESS:JL. P. JAYAKARTA 46 NO. 15 DJAKARTA, INDONESIA PHONE NUMBER:+62-821 22 053 175FAX NUMBER:+62-6230 7746ISSUE DATE : 11 May 2011TRADE NAME:PALM FATTY ACID DISTILLATE CLASSIFICATION: EDIBLE VEGETABLE OILPRODUCT USE:RAW MATERIAL FOR THE INDUSTRIAL PRODUCT(NON FOOD)SECTION 2 : COMPOSITION / INFORMATION OF INGREDIENTSIngredient: 100 % Palm Fatty AcidCAS - No.: 61788 66 7EINCS No.: 262-994-4SECTION 3 : HAZARD IDENTIFICATIONHAZARD IDENTIFICATION :UnhazardousSECTION 4 : PHYSICAL & CHEMICAL PROPERTIESPHYSICAL FORMSOLIDFREE TATTY ACID AS PALMITIC (%)70.0 min.MOISTURE (%)1.0 max.IODINE VALUE (cg/g oil)46.0 min.TOTAL FATTY MATTER (%)95.0 min.SECTION 5 : FIRE & EXPLOSION DATAFlammabilityMay be combustible at high temperatureAuto-Ignition Temperature210oCFlamable LimitsNot availableProducts of CombustionNot availableFire Hazards in presence of various substances: not availableExplosion Hazards in presence of various substances Risks of explosion of the product in presence of mechanical impact : not available Risks of explosion of the product in presence of static discharge: not availableFire fighting media and instructions Small fire: Use dry chemical powder Large fire: Use water spray, fog or foam. Do not use water jetSpecial remarks on fire hazards: not availableSpecial remarks on explosion hazards: not availableSECTION 6 : STABILITY / REACTIVITYStability:The product is stableCorrosivity: Non-corrosive in presence of glassSECTION 7 : FIRST AID - MEASURESEye contact: No known effect on eye contact, rinse with water for a few minutesSkin contact: No known effect on skin contact, rinse with water for a few minutesSECTION 8 : ACCIDENTAL RELEASE MEASURESSMALL SPILL :Use appropriate tools to put the spilled solid in a convenient waste disposal container.finish cleaning by spreading water on the contaminated surface and dispose of accordingto local and regional authority requirements.LARGE SPILL :If the product is in its solid form: Use a shovel to put the material into a convenient waste disposal containerIf the product is in its liquid form : Absorb with an inert material and put the spilled appropriate waste disposal, finish cleaning by spreading water on the contaminated surface and allow to evacuate throughthe sanitary system.SECTION 9 : EXPOSURE CONTROL / PERSONAL PROTECTIONEngineering controls : Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.Personal protection : Safety glasses, lab coatPersonal protection in case of a large spill : splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a specialist before handling this product.Exposure Limits: Not available SECTION 10 : STORAGE AND HANDLING PROCEDURESHandling : Keep from contact with oxygen, sunlight, and direct heatingStorage: Keep container closedShelf Life: Not analyzed (depends on the storage tank or packaging)SECTION 11 : TOXICOLOGICAL INFORMATIONToxicological Information: Non toxicSECTION 12 : ECOLOGICAL INFORMATIONBiotic degradation : BiodegradableSECTION 13 : DISPOSAL CONSIDERATIONSDISPOSAL: Disposal should be accordance with local, provincial or national legislationSECTION 14 : TRANSPORT INFORMATIONNot dangerous for conveyanceSECTION 15 : OTHER REGULATORY INFORMATIONOther regulations : Not availableSECTION 16 : OTHER INFORMATIONThis information is based on our current knowledge and is inte