人人文库网 > 图纸下载 > 毕业设计 > 叉车设计【6张图纸】【优秀】

外文翻译--风靡时期.doc

叉车设计【6张图纸】【优秀】

资源目录

叉车设计【6张图纸】【优秀】.rar

外文翻译--风靡时期.doc---(点击预览)

压缩包内文档预览：

编号：421914 类型：共享资源大小：1.86MB 格式：RAR 上传时间：2015-03-30 上传人：上*** IP属地：江苏

40
积分

版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载

关键词：: 叉车设计图纸叉车设计

资源描述：

叉车设计

115页 44000字数+说明书+任务书+外文翻译+6张CAD图纸【详情如下】

举升液压缸A2.dwg

任务书.doc

叉车设计说明书.doc

变速箱A0.dwg

外文翻译--风靡时期.doc

封面.doc

差速器A0.dwg

总图A0.dwg

齿轮A2.dwg

齿轮轴A2.dwg

QQ截图20140122220158.gif

变速箱A0.gif

叉车设计.gif

差速器A0.gif

齿轮A2.gif

齿轮轴A2.gif

举升液压缸A2.gif

1 绪论

1.1 国内叉车外观造型设计的现状1

1.2 国际叉车外观造型设计的现状2

1.3 叉车造型设计几个方面2

1.4 叉车技术的发展趋势4

1.5 叉车在特殊条件下的应用 11

2　叉车设计总体方案

2.1 设计总体方案确定15

2.1.1 方案的制定原则15

2.1.2 设计方案的规划 15

2.1.3 方案设计内容总结 17

2.2　叉车发动机的选择17

2.2.1 发动机基本型式的选择17

2.2.2 发动机主要性能指标的选择19

3 变速箱设计

3.1 变速箱的构造和原理23

3.2 变速箱的结构方案图26

3.3 变速箱主要参数的选择27

3.3.1 变速箱挂慢速档时参数选择27

3.3.2 变速箱挂快速档时参数选择30

3.3.3 变速箱挂倒档时参数选择32

3.3.4 中心距确定34

3.3.5 齿轮模数确定34

3.3.6 齿数分配35

3.3.7 齿轮其他基本几何参数与结构图38

3.3.8 主要零件的计算44

3.4 齿轮公差组的确定49

3.5 轴的结够设计及强度计算50

3.5.1 第一轴的结够设计及强度计算50

3.5.2 中间轴的结够设计及强度计算63

3.6 轴承的选择与校核73

3.7 键的选择与校核76

3.8 确定箱体的基本参数 80

4 差速器设计

4.1　差速器的类型及选择 81

4.2 差速器齿轮设计81

4.2.1 齿轮主要参数选择 81

4.2.2 几何参数的计算82

4.2.3 行星齿轮轴直径及支撑长度确定84

4.3 齿轮强度计算 84

4.4 主减速器齿轮几何尺寸计算85

5 液压驱动与控制系统的设计

5.1 驱动马达的选择86

5.2 举升液压缸的计算 87

5.2.1 液压缸主要尺寸的确定 87

5.2.2 液压缸的结构设计 90

5.3 货叉前端液压缸设计95

5.4 驱动方案的选择 98

5.5 驱动方案的确定100

6 液压系统的常见问题及解决措施 101

结论 107

参考文献 108

附录1 叉车总图 110

翻译部分

英文原文 111

中文译文 117

致谢 121

摘要

叉车具有装卸和搬运功能，机动灵活，能适应多变的装卸搬运要求，普遍适用于港口、车站、货场、车间、仓库、油田及机场等处，还可以进入船舱和集装箱内进行装卸作业，除此之外，还广泛应用于军事部门和特殊防爆部门，有的车辆可无人驾驶，到人员不断接近的地方工作适用于柔性加工系统，总之，随着物流技术的不断发展和工业化水平的提高，叉车使用范围将日益扩大，成为一种产量与品种很多的装卸搬运机械。

本叉车是参照市场上已有产品大连6113BG型10吨叉车设计，基本参数与相近，最大载重量也为10吨，本设计主要设计了变速箱、起降油缸、差速器、货叉前端，其中货叉前端档块为创新点。

现代叉车技术发展的主要趋势是充分考虑舒适性、安全可靠性和可维护性 ,产品专业化、系列多样化,大量应用新技术,完善操控系统,重视节能和环保 ,全面提升产品的性能和品质。

通过对国际国内叉车造型设计的现状分析，运用工业设计的理论和方法，研究了叉车造型设计的要素及设计原则：造型要求简洁明快、线条流畅，以体现车身的力度感与坚实稳重的感；色彩．力求单纯，给人以轻松、愉悦的感觉，主色调以明度较高的黄色、橙色为宜；车身前后左右要求有宽大的玻璃，仪表具有良好的可读性。研究结果对叉车设计具有重要的实际指导意义。

关键词：叉车；三轴式；滑移直齿轮变速；紧凑

ABSTRACT

Forklifts can do handing works,and can flexibility to adapt to changing of handing requirements,and generally applicable to ports,railway stations,freight yard,workshops,warehouses,oil fields and the airport and places,and forklifts could still enter the cabin and container handing operations within.In addition,forklifts are alseo widely used in military and special explosion—proof sector,some vehicles will be unmanned,that officers should hot work in places close to or for Flexible Manufacturing Systerm.In short, as the logistics and technological development and the enhancement of the level of industrialization,the use of fork lifts will be expanding ,and it will become a yield varieties with a lot of material handing machinery.

The forklift is based produces already on the market in Dalian 6113 BG-10-ton forklift design,the basit parameters was similar,for the largest load of 10 tons.The main degin of the design is the transmission, Other parts only briefly describes or do not given the design.Within this total,the transmission of three-axis,gearbex,sliding gear transmission,simple and compact structure,by the same agencies to achieve a variable speed transmission and reverse operation..

The major trend ofmodern technology developmentof the fork truck is to be fully in consideration of the friendly operation, the reliability, the safety, the goodmaintenance, the specialization, the series, and the diversificat, and to adopt new technology, to improve steering system, and to focuson energy saving and environmentprotection in order to promote the truck’s capacity and quality.

Based on the analysis of current status of international and domestic forklift truck form design， the key elements and design principles in forklift truck form design was researched using industriM design theory and methodology：It Was put forward that the form offorklift truck should be simple and lively tll smooth lines in order to convey the sense of strength and steadiness；the color strives simplicity to make people feel pleasant and light — mainly usingtones ofyeHow and orange；there shouldbe big ass atthefrontand back oftrucks；thein— struments should be easy to read．The research results provided practical reference for forklift truck design．

Keywords： fork truck; 3-axis; sliding gear transmission; compact

本设计选用的发动机型号：大连6113BG

　　　额定功率：112/2200kw/rpm

　　　最大扭矩：500/1600Nm/rpm

　　　轮胎：前轮：4X10.00-20-16PR

　　后轮：2X10.00-20-16PR

　　　传动形式：液力传动

　　　额定起重量（kg）：10000

　　　最大起升高度（mm）：4000

　　　载荷中心距（mm）：600

　　　最大起升速度（满载）（mm/s）：320

　　　门架倾角前/后（deg）：6/12

　　　行驶速度（空载）（km/h）：前进：26

　　　后退：26

　　　最小转弯半径（mm）：4000

　　　爬坡度（%）：20

　　　全长（G）（mm）：5775

　　　全宽（H）（mm）：2280

　　　全高（J）（mm）：3515

　　　护顶架高度（mm）：2830

　　　轴距（L）（mm）：2800

　　　轮距（L）（mm）：前：1700

　　后：1800

　　　轮胎：

　　　产品名称： 10.00-20-16PR (Q-9C)

　　　规格： 10.00-20

　　　品牌：风神

　　　标准轮辋： 7.5

　　　外直径(mm)： 1055

　　　单胎最大负荷（kg）： 3000

　　　单胎充气压力（KPa）： 810

　　　所属类别：新品推荐

　　　层级： 16

　　　花纹代码： Q-9C

　　　断面宽(mm)： 278

　　　气门嘴型号： Z1-01-7

　　　双胎最大负荷（kg）： 2630

　　　双胎充气压力（KPa）： 740

　　　用途：较差路面和山区公路行驶。

　　　特点：牢固的胎面及花纹设计，抓着力强，优良的胎面配方使轮胎具有极佳的抗磨耗性能。

　　　适用：全轮位。

　　　3变速箱设计

3.1变速箱的构造和原理

　　　变速箱功用

　　　（1）改变传动比，满足不同行驶条件对牵引力的需要，使发动机尽量工作在有利的工况下，满足可能的行驶速度要求。

　　　（2）实现倒车行驶，用来满足汽车倒退行驶的需要。

　　　（3）中断动力传递，在发动机起动，怠速运转，汽车换档或需要停车进行动力输出时，中断向驱动轮的动力传递。

　　　变速箱分类

　　　变速器是由变速传动机构和操纵机构组成，需要时，还可以加装动力输出器。在分类上有两种方式：按传动比变化方式和按操纵方式的不同来分。

　　　（1）按传动比的变化方式划分，变速器可分为有级式、无级式和综合式三种。（a）有级式变速器：有级式变速器是目前使用最广的一种。它采用齿轮传动，具有若干个定值传动比。按所用轮系型式不同，有轴线固定式变速器(普通变速器)和轴线旋转式变速器(行星齿轮变速器)两种。目前，轿车和轻、中型货车变速器的传动比通常有3-5个前进档和一个倒档，在重型货车用的组合式变速器中，则有更多档位。所谓变速器档数即指其前进档位数。

　　　（b）无级式变速器: 无级式变速器其的传动比在一定的数值范围内可按无限多级变化，常见的有电力式和液力式(动液式)两种。电力式无级变速器的变速传动部件为直流串激电动机，除在无轨电车上应用外，在超重型自卸车传动系中也有广泛采用的趋势。动液式无级变速器的传动部件为液力变矩器。（c）综合式变速器：是指由液力变矩器和齿轮式有级变速器组成的液力机械式变速器，其传动比可在最大指与最小值之间的几个间断的范围内作无级变化，目前应用较多。

（2）按操纵方式划分，变速器可以分为强制操纵式，自动操纵式和半自动操纵式三种。

内容简介：: 英文原文Boom timeAhealthy market means that underground truck and LHD markers are enjoying high order levels, with new models and technology also coming .in the LHD sector, several new models are already on the market from firms including EJC, Fermel, Rham Equipment and Schopf (WME Oct & Nov 2004), while Atlas Copco intends to launch at least one new design in 2005 possibly an St14.But it is the truck sector that is the most active right now with renewed emphasis on power to weight ratios right through the payload range The latest models are taking advantage of advances in diesel technology by fitting more powerful engines and allowing better speeds on steep ramp hauls .The impact of this is significant, as higher speeds mean lower cycle times and offer major gains in productivity, even allowing reductions in fleet sizes.At the top of the payload scale competition is now particularly fierce. Sandvik Tamrock is certainly pushing the boundaries with its Toro 60, a three axle truck with a rigid chassis and a 60 tonne capacity. This Cummins-powered truck offers a good power to weight ratio and a payload advantage over Caterpillars AD55 and atlas Copos MT5010 that Sandvik Tamrock says should allow mines to trim fleet size, especially over longer ramp hauls. sandvik Tamrock expects the Toro 60 to take back some of the market claimed by Cats successful AD55,with its 55 tonne payload. However Atlas Copco is fighting back against both Caterpillar and Sandvik tamrock with yet another upgrade to its MT5010 truck, providing a power increase from 488-597kw/650-800hp. The new Cummins Qsk19 diesel boosts the MT5010s power to weight ratio from 5.27-6.5kw/tonne, allowing it to reclaim ground over the AD55 and Toro60, despite their larger payload. Atlse Copco also says that driveline problems which afflicted earlier truck designs have long since been eliminated. The company points out that MT5010 is a successful design with units operating I Australia recording speeds of 14kph on 1:10 ramps, despite having 23,000 hours on the clock. Evaluating which of these three trucks offers the highest productivity could only be achieved by detailed study(and perhaps require testing), possibly with a different result depending on the nature of the specific mining application. The revised MT5010 has a higher power to weight ratio than either the AD55 or the Toro 60 but these trucks have bigger payloads of 55 and 60 tonnes respectively. The machine that best suits a given mining operation may be due to a number of basic factors such as haul distance and ramp gradient as well as ventilation infrastructure, ambient temperature and even material type. Overall though the customer will be the winner, with the latest large Atlas Copco, Caterpillar and Sandvik Tamrock trucks all offering much better productivity and reliability than was ever available to the 50+tonne class before.The same dort of power to weight ratio gains can be seen further down the truck payload range. Atlas Copco, Caterpillar, Dux, EJC, MTI and Zanam legmet have all fitted more powerful diesels to trucks with payloads in the 12-30tonne range,with similar benefits to those seen at the top of the capacity scale. For example, one Canadian mine replaced its earlier generation 16 and 17 tonners with newer 20 tonners,which offer short travel times on ramp, despite their increased payload and this has resulted in a substantial productivity gain overall. That the new generation of engines produce more power from similar outer dimensions is important, as they give a better payload/litre of fuel burned. However the cleaner emissions have added benefits, with cost advantages to mine ventilation requirements.In general, the new small-mid sized trucks themselves are externally similar to previous models, but are fitted with stronger drivetrains and axles to cope with the additional power (WME Oct2004&WME Nov 2004). Small detail changes like extended oil life or filters with replaceable elements make identifiable benefits to service costs. While the basic designs of these updated trucks remains similar, the better drivelines and new generation diesels mean that the machines require less maintenance are more reliable and are considerably cheaper to run.Self-driveAutomation is still on the agenda with regard to LHDs and trucks, with the many benefits being shown at those mines that have taken the plunge and opted for this technology. These is still progress to be made with regard to orders but Caterpillar and Sandvilk Tamrock are both pushing hard to sign up customers for their LHD(and truck)automation systems, MINEGEM and Automine respectively. At the moment only Codelco is using the full Automine automation system at the Pipa Norte and Diablo Regimiento zones of its EITeniente copper mine in Chile. But DeBeers and Sandvik TAmrock are developing a system for the Finsch mine in South Africa. And while Caterpillar has yet to notch up a commercial sale for MINEGEM, the technology is being used for production at the northparkes and Olympic Dam mines in Australia.There are a lot of similarities in the way MINEGEM and Automine work, with laser equipment mounted onboard the LHDs. These scan the tunnels ahead of the machines as they tram, picking up changes in the tunnel profile and allowing the machine to recognize its position in milliseconds. The lasers update tunnel maps continuously to, resulting in large volumes of date shuttling back and forth constantly. Cats MINEGEM system operates on a wireless LAN infrastructure with an 11 Mbps capacity. Sandvik TAmrocks Automine system requires similar broadband communicational capabilities. Both MINEGEM and Automine are controlled by conventional and readily available computing hardware, while a good deal of the components is standard off-the-shelf items selected for their ability to cope with the tough mining cycle. With these technologies, one operator can supervise the running of up to three LHDs that run more or less autonomously, with the only manual input being for the bucket loading part of their operating cycle. Caterpilliars MINEGEM is a package built up of several layers and this allows customers to select the separate components they require. The tactical layer of MINEGEM provides automatic steering for an LHD and prevents it from colliding with the walls of the tunnel or against other vehicles. The operator fills the bucket and selects forward or reverse, with the system providing automated tramming and bucket dumping. The strategic layer is more complex as this integrates the operation of up to three LHDs, oversees their operation and has higher level planning capabilities. It is the strategic layer that is in chare of traffic control functions, so that multiple cycles can be scriptedfor blending ores from different drawpoints for instance, with the overall benefit of increasing production efficiency.Safety is improved as the operators can be situated away from where the machines are running (they dont even have to be in the mine at all and in theory, could be sitting in an office on the other side of the world). Moreover, the machines require less maintenance and have lower running costs as gearchanges are made at optimum times, engines are not over-revved, there is less wheel-spin and the risk from collisions with tunnel walls of other machines is all but eliminated.However, the complete Automine and MINEGEM technologies are not inexpensive and suit applications in purpose-built mine areas (or even mines).The automated equipment runs in parts of the mine that are separated from other operations and with personnel access carefully controlled. There are however comparatively few large(and/or new)mines with the sort of block caving or sublevel caving applications that best suit this sophisticated full automation technology and can justify the investment. As a result, Caterpilliar and Sandvik Tamrock (separately) identified a need for less sophisticated systems that offer many of the same operating benefits, while being substantially less costly. By opting for just the tactical layer of MINEGEM (called Co-Pilot), a mining firm can introduce an effective and comparatively low-cost technology for single LHD automation. And CO-Pilot comes with a manual over-ride, allowing it to be used as a conventional remote control if/when required. In this respect, Sandvik Tamrock has a broadly similar product in the shape of its Automate system, which is also designed for single LHD automate and has equivalent control specifications.With Automation or Co-Pilot, mines can introduce single LHD automation into applications where conventional remote control systems are used at present. The advantage of this is that single machines can benefit from the automated tramming, without the expense of the complete machine automation package(or the inherent changes to infrastructure and mine layout). Both Caterpilliar and Sandvik Tamrock point out that this technology has huge potential with firms using conventional remote control and will be of particular benefit at mines with high incidences LHD collision damage. And, as anyone who has ever operated a radio-controlled car can attest, it can be difficult to judge distances between a moving machine and its surroundings from a distance. The single automation equipment will take away this risk of collisions and make substantial reductions in machine downtime and repairs, as well as boosting productivity. A study commissioned by Caterpillar from Australian body STEM shows that replacing conventional remote controls with simpler single LHD systems would provide payback times of three years(and even less in some instances), while providing productivity gains of up to 37%.For the moment, mining firms seem reluctant to invest in full LHD automation due to the expense and complexity of the technology. But with the production and cost benefits offered by Cats MINEGEM Co-Pilot and Sandvik Tamrocks Automate system for single LHD automation in existing mines, that situation could well change soon.Russian firm MOaZ builds two underground trucks, the 7405-9586 for narrow operating conditions and the more conventional 7529, both of which have 22 tonne payloads. The 7405-9586 weighs 19.5 tonnes unladen, has a canopy as standard, is powered by a JMZ-238KM2 diesel rated at 140kw and measures 2.9m wide for use in narrow access areas. As this model has 2WD it can cope with 9maximum slopes and best suits flat hauls or tunneling applications, offering a maximum speed of 40 kph. The 7529, weighs 24 tonnes unladen, features 4WD and has a more powerful JMZ-238BN2 engine delivering 190 kw, allowing use on steeper ramps. This machine also has a top speed of 40 kph and is equipped with an enclosed cab as standard. Both the 7405-9586 and 7529 trucks can be fitted with Deutz engines if required.German firm Paus built two tractors for Kali & Salz that tow pallets on trailers using a gooseneck connection. The vehicles are powered by 176 kw Deutz BF6M1013 engines. These offer payloads of up to 30 tonnes and are used to carry equipment, spare parts and materials underground, though product haulage is still by truck. Paus also has a number of loaders now operating at mines in Russia, with a number of engineering coming in a well from Australia. These are from engineering firms carrying out feasibility studies and are not expected become equipment orders immediately, but the firm is confident that these will translate into actual deals. The company adds that it is now receiving interest in the novel undercutting type machines, of which it built 15 units for operations in Belarus. In addition, Paus is building a number of ditch cleaning machines for Norilsk Nickel in Russia. These are based around a small mine locomotive, with an excavator boom that allows the machine t clear the dewatering ditches running alongside the tracks.中文译文风靡时期良好的市场意味着地下卡车和LHD制造者正在享有一流的水平，同时新模式和技术不断涌向市场。在LHD行业，来自EJC，FERMEL，RHAM EQUIPMENT和SCHOPF公司的新模式已出现在市场上，与此同时，ATLAS COPCO公司预计最迟在2005年开始从事一种新型设计-ST14。但是，在卡车行业，现在最活跃的事情是重新重视功重比和有效载荷的变化。最新模式通过安装更大功率的发动机和允许在陡的斜坡行程中有较好的运行速度，充分利用了柴油机在技术上的发展。这种作用是显著的，速度愈高意味着循环周期愈短，获得的生产效率愈高，甚至允许减小规模。在有效载荷极限方面的竞争，现在是特别的激烈。SANDVIK TAMROCK正推出TORO60、三轴带有固定底座和容量60T的卡车，这种功率的卡车，可以提供比CATERPILLAR公司AD55和ATLAS公司的MT5010更好的功重比，以至于SANDVIL TAMROCK公司说这种设备允许矿井改变它的规模，特别是长的斜坡行程的地方。SANDVIK TAMROCK 期望TORO60可以夺回由有效载荷是55T的CAT公司的有成效的AD55占领的市场，然而，ATLAS COPCO公司用另一种改进型的可提供功率488-597KW/650-800HP变化范围的MT5010卡车同CATERPILLAR 和SANDVIK TAMROCK两家公司作斗争。新型QSK19柴油机使MT5010的功重比从5.27KW/T增加到6.5KW/T，这使它重新获得由AD55和TORO60占领的市场，ATLAS COPCO公司说尽管AD55和TORO60有很大的有效载荷，但困扰卡车设计者的路线问题，很长时间才被消除。根据在澳大利亚的速度14KPH 1：10斜坡上的单元操作，公司指出，MT5010是一项非常成功的设计，尽管耗时23000H。对这三种卡车，哪种能提供更高的生产率的评估，只有通过细节的研究才能实现，不同的结果依赖于特定矿井应用的性质。虽然AD55有55T的有效载荷和TORO60有60T的有效载荷，但与AD55和TORO60相比，改进型MT5010有更高的功重比。某种机器最适用于某种给定的矿井操作可能是因为一些基本因素，比如：行程距离、坡度、通风设施、周围环境的温度，甚至材料类型。不过总体上说，顾客是赢家，与以前的50T级可获得的生产率和可靠度相比，最新大型的ATLAS 、COPCO CATERPILLAR 和 SANDVIK TAMROCK公司生产的卡车全都可以提供更好的生产率和可靠度。卡车有效载荷变化不久，同种功重比的获得即可看到。ATLAS COPCOC、ATERPILLAR、 DUX、EJC、MTI和ZANAM LEGMET 公司安装更大功率的柴油机在卡车上，这允许有效载荷在12-30T范围内变化，类似成效在容量范围上也能看到。例如，一加拿大矿井，用新型20T取代了它早期的16T-17T，它在斜坡上费时较短，尽管只增加了有效载荷，但大体上仍提高了生产率。与同表面尺寸的发电机相比，新一代发电机提供更大的功率是重要的，因为燃料燃烧时，它们能给更多的能量。不管怎样，排放物愈清洁，利润愈高，通风设施成本愈低。一般来说，新中小型卡车表面上类似于以往的模式，只是安装了更坚固的驾驶装置和便于应付额外功率的轴。一些小细节的改变，如增加汽油的寿命或取代过滤器，可以识别对服务成本的优势。这些更新过的卡车的基本设计仍保持类似性，好的路线和新一代柴油机意味着机器需要较少的维修，拥有更高的可信赖度和相当低的运行成本。自动驾驶对于LHD和卡车来说，自动化一直是重要事情，对于这项技术已有许多优势呈现在那些矿业面前等待他们做出决定和选择。定单一直在增加，尽管如此，CATERPILLAR和SANDVIK TAMROCK两家公司一直对为了他们各自的自动化系统、MINEGEM和自动采矿的签约顾客施压。此时此刻，仅CODELCO公司正在应用全自动系统，在CHILE的EITENIENTE矿的PIPA NORTE 和DIABLE REGIMENTO区域。但是DEBEERS 和SANDVIK TAMROCK 公司正在为了在南非的FINSCH矿井应用而研发一种新的系统。此时，CATERPILLAR公司已获得MINEGEM的商业化买卖权，此技术正在应用于澳大利亚的NORTHPARKES和OLYMPIC DAM矿井中。MINEGEM和AUTOMATE之间有许多类似的地方，在LHD上都安装有激光装置。当卡车运行时，这些激光装置可以扫描机器前面的隧道，接收隧道侧面轮廓的变化，然后允许在几秒内对它的位置做出辨别。激光装置根据连续前进后退所得大量的数据更新隧道地图。CATERPILLAR公司的MINEGEM系统运行于容量是11MPS的无线LAN基本设施上。SANDVIK TAMROCK公司的自动采矿系统需要广泛的沟通能力。MINEGEM和自动采矿由系统和可快速获得的计算机硬件控制，同时有许多组成部分是普通的已有的项目，这些项目选择它们应付棘手循环问题的能力。在这些技术支持下，一位操作者可以管理三台正在运行的LHD，这些LHD或多或少的自主地运行，因为它们运行周期中装载是手动的，CATERPILLAR公司的MINEGEM是一个有几层的软件包，这允许顾客选择他们的需要部件。战术层为LHD提供自动驾驶，防止它与隧道墙壁碰撞或车辆相碰。操作者装载，然后选择前进或后退，系统自动形式和卸载。战略层比较复杂，因为假如了操作装置，纵观全过程，有较高水平的计划能力。战略层掌握交通控制函数，因此复杂的循环也能一清二楚。例如，从不同的选择点掺和矿砂，大体上有效的增加生产率。操作者离开机器运行的地方时，安全性提高了，他们不必一直待在矿里面，理论上他们可以坐在地球的另一侧的办公

温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。