NN-20500-204(中英)_阿尔卡特 - 朗讯 9326 数字型 2U NodeB V2维护指南

NN-20500-204 Wireless Service Provider Solutions 无线服务供应商解决方案 W-CDMA W-CDMA Alcatel-Lucent 9326 digital 2U Node B V2 阿尔卡特朗讯 9326 数字 2U 节点 B V2 Maintenance Guide 维护指南 NN-20500-204 02.01/EN Preliminary September 2008 NN-20500-204 02.01/英文初稿 2008 年 9 月 Wireless Service Provider Solutions 无线服务供应商解决方案 W-CDMA W-CDMA Alcatel-Lucent 9326 digital 2U Node B V2 阿尔卡特朗讯 9326 数字 2U 节点 B V2 Maintenance Guide 维护指南 Document number: NN-20500-204 文件编号： NN-20500-204 Document issue: 02.01/EN 文件发行 ： 02.01/EN Document status: Preliminary 文件状态：初稿 Product release: UA06.0 产品发行： UA06.0 Date: September 2008 日期： 2008 年 9 月 Copyright (C) 2008 Alcatel-Lucent, All Rights Reserved 版权 (C) 2008 阿尔卡特朗讯，版权所有 ALCATEL-LUCENT CONFIDENTIAL 阿尔卡特朗讯机密 UNCONTROLLED COPY: The master of this document is stored on an electronic database and is write protected； it may be altered only by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically ensures access to the current issue. Any hardcopies taken must be regarded as uncontrolled copies. 印本自由：本文件的正本存放在一个电子数据库上，已“写保护”；只能由授权人员进行更改。 可以印制副本，但不推荐。 电子查看正本可确保进入现期刊物。 任何硬拷贝都必须视为自由印本。 ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent. Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose the information only to its employees with a need to know, and shall protect the information from disclosure and dissemination to third parties. Except as expressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the information contained herein. If you have received this document in error, please notify the sender and destroy it immediately. 阿尔卡特朗讯机密：本文件中包含的信息归阿尔卡特朗讯所有。 除了由阿尔卡特朗讯明确地书面授权外，持有者应对其中的全部信息保密，只在需要了解的条件下，透露给其员工，并应保护该信息不会泄露或散布给第三方。 除了由阿尔卡特朗讯明确地书面授权外，持有者无权使用其中包含的信息。 如果您误收到本文件，请通知发信者并立即将文件破坏。 Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcatel and Lucent Technologies. “阿尔卡特朗讯”、“阿尔卡特”、“朗讯科技”和它们的相应标识均为阿尔卡特朗讯、阿尔卡特和朗讯科技的商标和服务商标。 All other trademarks are the property of their owners. 所有其它商标均归其所有者所有。 Publication history i 出版历史 i Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 PUBLICATION HISTORY 出版历史 SYSTEM RELEASE: UA06.0 系统发行版： UA06.0 September 2008 2008 年 9 月 Issue 02.01/EN Preliminary 02.01 期 /英文初稿 Update for UA06.0 UA06.0 更新版 SYSTEM RELEASE: UA05.1.3 系统发行版： UA05.1.3 September 2008 2008 年 9 月 Issue 01.04/EN Standard 01.04 期 /英文标准 Update for d2U V2 Phase 1 DR5 d2U V2 第一阶段 DR5 更新 August 2008 2008 年 8 月 Issue 01.03/EN Preliminary 01.03 期 /英文初稿 Update for UA05.1.3 UA05.1.3 更新版 SYSTEM RELEASE: UA05.1.2 系统发行版： UA05.1.2 May 2008 2008 年 5 月 Issue 01.02/EN Preliminary 01.02 期 /英文初稿 Update after internal review 内部审阅后更新 April 2008 Publication history ii 出版历史 ii NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 2008 年 8 月 Issue 01.01/EN Draft 01.01 期 /英文初稿 Creation for UA05.1.2 为 UA05.1.2 而创建 Table of contents ii 目录 ii NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 1 About this publication.1 1 关于本出版物 .1 2 Access Network Roadmap .3 2 访问网络路标 .3 3 New in this release .4 3 本发行版中的新内容 .4 4 Corrective maintenance activity .5 4 校正维护活动 .5 5 9326 d2U V2 introduction.8 5 9326 d2U V2 简介 .8 6 9326 d2U V2 hardware presentation .10 6 9326 d2U V2 硬件演示 .10 7 9326 d2U power up and power down procedures .11 7 9326 d2U 加电和掉电步骤 .11 7.1 Powering up a 9326 d2U V2 .12 7.1 为一个 9326 d2U V2 加电 .12 7.2 Powering down a 9326 d2U V2 .14 7.2 为一个 9326 d2U V2 掉电 .14 8 9326 d2U V2 corrective maintenance procedures .16 8 9326 d2U V2 校正维护步骤 .16 8.1 Replacing the digital shelf equipment .17 8.1 更换数字货架设备 .17 8.1.1 Replacing an iCEM-U .18 8.1.1 更换 iCEM-U .18 8.1.2 Replacing an xCEM-U .22 8.1.2 更换 xCEM-U .22 8.1.3 Replacing the iCCM-U.26 8.1.3 更换 iCCM-U.26 8.1.4 Replacing the xCCM-U.32 8.1.4 更换 xCCM-U.32 8.1.5 Replacing an optical transceiver .37 8.1.5 更换光收发器 .37 8.1.6 Replacing the fans rack (48V).40 8.1.6 更换风扇架 (48V) .40 8.1.7 Replacing the pre-cabled 9326 d2U V2 rack .45 8.1.7 更换预接电缆 9326 d2U V2 机架 .45 8.2 Replacing the optional equipment.55 8.2 更换选用设备 .55 8.2.1 Replacing the External Alarm module.56 8.2.1 更换外部报警模块 .56 8.2.2 Replacing the LPPCM module .58 8.2.2 更换 LPPCM 模块 .58 List of figures iii 插图清单 iii Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 Figure 1 Outside view of the 9326 d2U V2 .9 图 1 9326 d2U V2 的外观图 .9 Figure 2 9326 d2U V2 front view (with iCCM-U) .10 图 2 9326 d2U V2 正视图（含 iCCM-U） .10 Figure 3 9326 d2U V2 front view (with xCCM-U) .10 图 3 9326 d2U V2 正视图（含 xCCM-U） .10 Figure 4 Power switch on the RUC front panel.12 图 4 RUC 前面板上的电源开关 .12 Figure 5 Power switch on the RUC front panel.14 图 5 RUC 前面板上的电源开关 .14 Figure 6 iCEM-U front panel .19 图 6 iCEM-U 前面板 .19 Figure 7 xCEM-U front panel .23 图 7 xCEM-U 前面板 .23 Figure 8 iCCM-U front panel .27 图 8 iCCM-U 前面板 .27 Figure 9 xCCM-U front panel .33 图 9 xCCM-U 前面板 .33 Figure 10 Location of optical connectors in the 9326 d2U V2.38 图 10 9326 d2U V2 中光连接器的位置 .38 Figure 11 Inserting an SFP transceiver in the iCCM-U .39 图 11 在 iCCM-U 中插入 SFP 收发器 .39 Figure 12 9326 d2U V2 front view (with iCCM-U) .40 图 12 9326 d2U V2 正视图（含 iCCM-U） .40 Figure 13 9326 d2U V2 front view (with xCCM-U) .41 图 13 9326 d2U V2 正视图（含 xCCM-U） .41 Figure 14 Extracting the fans rack .42 图 14 抽出风扇架 .42 Figure 15 Fans rack .42 图 15 风扇架 .42 Figure 16 9326 d2U V2 front view (with iCCM-U) .46 图 16 9326 d2U V2 正视图（含 iCCM-U） .46 Figure 17 9326 d2U V2 front view (with xCCM-U) .46 图 17 9326 d2U V2 正视图（含 xCCM-U） .46 Figure 18 Location of the management sticker .47 图 18 管理标签的位置 .47 Figure 19 Front panel of the External Alarm module .56 图 19 外部报警模块的前面板 .56 Figure 20 LPPCM module front panel .59 图 20 LPPCM 模块前面板 .59 1 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 1 About this publication 1 关于本出版物 This publication describes the corrective maintenance procedures applicable to the 9326 d2U V2 rack. 本出版物描述了适用于 9326 d2U V2 机架的校正维护步骤。 Applicability 适用性 This publication applies to UA06.0. 此出版物适用于 UA06.0。 Audience 读者 The publication is intended for operation and maintenance personnel and for those who want to know the principles of 9326 d2U V2 maintenance. 本出版物面向操作人员及维护人员，以及那些想了解 9326 d2U V2 维护原理的人群。 Prerequisites 资格条件 It is recommended that readers become familiar with the following publications: 推荐给熟悉下列出版物的读者： * Alcatel-Lucent 9326 digital 2U Node B V2 Technical Description (NN-20500-203) * 阿尔卡特朗讯 9326 数字 2U 节点 B V2 技术说明 (NN-20500-203) * Alcatel-Lucent 9300 W-CDMA Product Family documentation: * 阿尔卡特朗讯 9300 W-CDMA 产品系列文件： Node B Alarms Reference Guide (NN-20500-018) 节点 B 警报参考指南 (NN-20500-018) Terminology (NN-20500-002) 术语 (NN-20500-002) * Alcatel-Lucent Node B Commissioning & Fault Management User Manual: TIL (NN-20500-019) * 阿尔卡特朗讯节点 B - 调试与故障管理用户手册： TIL (NN-20500-019) How this publication is organized 本出版物是如何编制的 This publication consists of eight parts: 本出版物包括 8 个部分： * The first chapter lists what is new in this publication. * 第一章列出了本出版物的新内容。 * The second part describes the corrective maintenance activity. * 第二部分描述了校正维护活动。 2 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 * The third part introduces the 9326 d2U V2 rack. * 第三部分介绍了 9326 d2U V2 机架。 * The fourth part presents the 9326 d2U V2 hardware. * 第四部分提供了 9326 d2U V2 硬件。 * The fifth part describes the power up and power down procedures. * 第五部分描述了加电和掉电步骤。 * The last part describes the corrective maintenance procedures. * 最后一部分描述了校正维护步骤。 Vocabulary conventions 词汇惯例 For a list of terms used in this publication, see Alcatel-Lucent 9300 W-CDMA Product Family Terminology (NN-20500-002). 对于本刊物中所用的术语列表，参见阿尔卡特朗讯 9300 W-CDMA产品系列 - 术语 (NN-20500-002)。 3 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 Safety regulation 安全规程 In order to guarantee the safety of personnel and equipment the following aspects must be taken into account: 为了保证人员和设备的安全，必须考虑下列几方面： * general personnel safety instructions * 一般人员安全说明 * equipment safety instructions * 设备安全说明 Caution, warning, and danger messages indicate the following possible risks. 注意、警告和危险消息表示可能存在下列危险。 注意 对服务和设备的影响 危险 电击 危险 环境和人员保护 注意 静电放电敏感 (ESDS)处理注意事项 4 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 2 Access Network Roadmap 2 访问网络路标 For collection roadmap, see Alcatel-Lucent 9300 W-CDMA Product Family Document Collection Overview and Update Summary (NN-20500-050). 关于收集路标，参见阿尔卡特朗讯 9300 W-CDMA 产品系列 - 文件收集概要和更新摘要 (NN-20500-050)。 5 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 3 New in this release 3 本发行版中的新内容 The following sections detail what is new in Alcatel-Lucent 9326 digital 2U Node B Maintenance Guide for UA06.0. 下列小节详细介绍了阿尔卡特朗讯 9326 数字 2U节点 B - UA06.0 维护指南中的新内容。 Features 特点 None 无 Other changes 其它更改 Update of TIL main window banner. TIL 主窗口标识更新 6 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 4 Corrective maintenance activity 4 校正维护活动 This part describes the corrective maintenance activity applicable to the 9326 d2U V2 rack. 本部分描述了适用于 9326 d2U V2 机架的校正维护步骤。 Corrective maintenance 校正维护 The network maintenance is based on the supervision of the network, by using the OAM graphical interface. For more information, refer to Alcatel-Lucent 9353 Management System User Guide (NN-20500-032). 通过使用 OAM 图形接口，基于网络监控的网络维护。 更多信息，参见阿尔卡特朗讯 9353 管理系统用户指南 (NN-20500-032)。 It is also based on the identification and replacement of faulty items of equipment, using the alarms. 同样基于设备故障零件的识别和更换，使用警报 The process is divided into the following two steps: 此过程分为以下两步： * locating and identifying the faulty items of equipment, by using the information provided in Alcatel-Lucent 9300 W-CDMA Product Family Node B Alarms Reference Guide (NN-20500-018). * 通过使用阿尔卡特朗讯 9300 W-CDMA 产品系列 - 节点 B 报警参考指南 (NN-20500-018)中提供的信息来查找和识别设备的故障零件。 * replacing the faulty items of equipment, by using the replacement procedures given in this document. * 通过使用本文件给出的更换步骤来更换设备的故障零件。 Note: 备注： The iModules replacement procedures described in this guide are based on the following assumptions: 本指南中描述的 iModules 更换步骤是基于下列假设： * your 9326 d2U V2 is equipped with the following digital modules: * 您的 9326 d2U V2 配备了下列数字模块： one iCCM-U upgraded with the specific adapter board and front panel (iCCM-U V2) 一个 iCCM-U 随着指定的适配器板和前 面板升级 one xCEM-U (mandatory) and possibly up to two additional xCEMs-U 一个 xCEM-U（强制的），最多可附加 2 个 xCEMs-U possibly up to two iCEMs-U upgraded with the specific adapter boards and front panels (iCEMs-U V2) 随着指定的适配器板和前面板 (iCEMs-U V2)升级，最多可附加 2个 iCEMs-U 7 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 * as spare parts, you ordered iCEMs-U V2 and iCCMs-U V2 modules (order codes: 3JR08057AA and 3JR08056AA). * 作为备件，您订购了 iCEMs-U V2 和 iCCMs-U V2 模块（订购代码：3JR08057AA 和 3JR08056AA）。 Replacing the digital shelf equipment 更换数字货架设备 Procedure 步骤 Order Code 订购代码 Impact on service 对业务的影响 Replacing an iCEM-U 更换 iCEM-U 3JR08057AA 3JR08057AA Loss of capacity or loss of service (depending on the number of CEMs in the digital shelf) 容量损耗或业务损耗（取决于数字货架中 CEM 的数量） Replacing an xCEM-U 更换 xCEM-U 300986049 300986049 Loss of capacity or loss of service (depending on the number of CEMs in the digital shelf) 容量损耗或业务损耗（取决于数字货架中 CEM 的数量） Replacing the iCCM-U 更换 iCCM-U 3JR08056AA 3JR08056AA Loss of service on the Remote Radio device(s) associated with the iCCM -U being replaced 与所更换的 iCCM-U 相关的远程射频装 置上的业务损耗 Replacing the xCCM-U 更换 xCCM-U 3JR20038AA 3JR20038AA Loss of service on the Remote Radio device(s)associated with the xCCM-U being replaced 与所更换的 xCCM-U 相关的远程射频装置上的业务损耗 8 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 Procedure 步骤 Order Code 订购代码 Impact on service 对业务的影响 Replacing an optical transceiver 更换光收发器 Single-Mode (SM): NTU850HA 单模式 (SM)： NTU850HA Loss of service on the Remote Radio device as-sociated with the optical transceiver being re-placed 与所更换的光收发器相关的远程射频装置上的业务损耗 Multi-Mode (MM): NTU850HM 多模式 (MM)： NTU850HM Replacing the fans rack (48V) 更换风扇架 (48V) 3JR08021AA 3JR08021AA Service interruption 业务中断 Replacing the pre- cabled 9326 d2U V2 rack 更换预接电缆 9326 d2U V2 机架 3JR08067AA 3JR08067AA Service interruption 业务中断 Replacing the optional equipment 更换选用设备 Procedure 步骤 Order Code 订购代码 Impact on service 对业务的影响 Replacing the LPPCM module 更换 LPPCM 模块 NTU870GM NTU870GM Service interruption 业务中断 Replacing the External Alarm module 更换外部报警模块 NTU870GA NTU870GA None 无 Description of a replacement procedure 更换步骤说明 A replacement procedure is divided into the following parts: 更换步骤可分为以下几部分： * the title * 标题 * the main body with the following information: * 含以下信息的正文： the intervention time 干预时间 the tools required 所需的工具 the impact of the procedure, if necessary 需要时，步骤的影响 the step-by-step actions of the procedure 步骤的逐步动作 One or more figures are provided to help you execute the actions. They show the FRU schematically and its location in the cabinet. 将提供一个或多个图，以帮助执行动作。 它们用图解法显示了 FRU 及其在机柜中的位置。 9 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 Intervention restrictions 干预限制 There may be a lapse of time between the identification of the alarm at the Access OAM Graphic User Interface (GUI) and the time you arrive at the site. 访问 OAM 图片时，报警识别之间存在时滞。用户接口 (GUI)以及到达站点的时间。 You must be synchronized with the access network controller or system administrator (by telephone) before an on-site intervention, in the following cases: 您必须在下列情况中，现场干预之前，与访问网络控制器或系统管理器（通过电话）同步： * isolating procedures * 隔离程序 * completion of an on-site intervention * 现场干预完成 * return to service procedure * 返回到业务程序 10 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 General personnel safety instructions 一般人员安全说明 The personnel must obey the safety instructions specific to the installation site: 人员必须遵守安装站点所指定的安全说明： * rules concerning the premises (see instructions posted on site or in the building) * 与场地有关的规则（参见现场或建筑物上张贴的说明） * rules linked to general personnel safety instructions * 与一般人员安全说明的相关规则 The personnel working on the cabinet must be authorized to work according to security standards. 在机柜上工作的人员必须依照安全标准，经授权后工作。 Equipment safety instructions 设备安全说明 The 9326 d2U V2 normally operates when the external temperature is between 5C and +65C. 9326 d2U V2 通常在外界温度在 5 C 和 +65 C 之间时操作。 11 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 5 9326 d2U V2 introduction 5 9326 d2U V2 简介 The 9326 d2U V2 is an enhanced 9326 d2U rack supporting xModules (xCEM-U, xCCM-U). It is designed to be connected to one of the following products via optical fiber links: 9326 d2U V2 是一个加强型 9326 d2U机架，支持 x模块 (xCEM-U, xCCM-U)。 其设计用于通过光纤链路连接到下列其中一个产品： * 9341 RRH40-AWS * 9341 RRH40-AWS * 9341 RRH40-21 * 9341 RRH40-21 * 9341 RRH40-08 * 9341 RRH40-08 * 9341 RRH40-19 * 9341 RRH40-19 * 9341 RRH20-21 * 9341 RRH20-21 * 9332 rCompact * 9332 rCompact The iModules (iCEM-U, iCCM-U) can be plugged in this 9326 d2U V2 rack, using specific adapter boards and front panels. 使用指定的适配器板和前面板，可将 i 模块 (iCEM-U, iCCM-U) 插入此 9326 d2U V2 机架。 xCEM-U and iCEM-U modules can be mixed inside the 9326 d2U V2 rack. The 9326 d2U V2 rack is factory-equipped with one xCCM-U or one iCCM-U (in slot 1), one xCEM-U (in slot 2) and two fillers.Depending on the capacity requirements, the 9326 d2U V2 rack can host two xCEMs-U, two iCEMs-U, or one xCEM-U and one iCEM-U in place of the two fillers (slot 3 and slot 4). xCEM-U 和 iCEM-U 模块可以在 9326 d2U V2 机架内部混合。 9326 d2U V2机架是工厂装配的一个 xCCM-U 或一个 iCCM-U（插槽 1 中）、一个 xCEM-U（插槽 2 中）和两个空位。根据电容的要求， 9326 d2U V2 机架可以容纳两个 xCEMs-U、两个 iCEMs-U 或一个 xCEM-U 和一个 iCEM-U 来代替这两个空位（插槽 3 和插槽 4）。 The Alcatel-Lucent Remote Radio solution improves flexibility for deploying mobile broadband Node Bs in space-constrained locations. It is particularly suited to macro-cellular application in dense areas, where site acquisition is difficult, and on sites where installation constraints prevent the use of legacy Node Bs. 阿尔卡特朗讯远程射频解决方案提高 了灵活性，可在空间受限位置部署移动宽带基站。 这特别适合于密集区内现场采集困难或遗留基站安装受限的地点的宏蜂窝应用。 Compared to legacy Node B site deployment, the Remote Radio solution provides the following benefits: 与遗留基站部署相比，远程射频解决方案提供了以下优势： 12 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 * reduced volume, weight, footprint, acoustic noise, and power consumption * 减小体积、重量、覆盖区域、噪声和功率消耗 * reduced cost of feeder paths from the Node B to the antenna * 降低从基站到天线的馈线路径成本 * increased RF power per carrier at the antenna feeder * 增加天线馈线处每个载体的射频功率 * reduced radio loss with use of the remote RF block concept, which eliminates the distance between the radio amplifier and the antenna * 采用远程射频模块概念，减少射频损耗，从而消除了射频放大器和天线的间距。 The Remote Radio solution provides for the UMTS system: 远程射频解决方案为 UMTS 系统提供： * the means of communication between a User Equipment (UE) and a network using Transport Channels * 用户设备 (UE)和网络之间通过运输通道的通信工具 * physical layer channels, which are necessary to synchronize the downlink and perform cell selection/reselection and handover preparation * 物理层通道，是使下行链路同步并执行信元选择 /重选以及移交准备的必要条件。 * measurement information to the UMTS RNC for radio resource management (handover, power control) * UMTS RNC 关于无线资源管理（移交，电源控制）的测量信息 13 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 The 9326 d2U V2 provides up to eight E1/T1 with Inversion Multiplexing ATM (IMA) or Drop-and-Insert capability (fractional E1/T1). The 9326 d2U V2 also supports multi-PCM without IMA. 9326 d2U V2 最多提供 8 个 E1/T1，带反向复用 ATM (IMA)或引出和插入能力（部分 E1/T1）。 9326 d2U V2 还支持不带 IMA 的多 PCM。 The 9326 d2U V2 delivers high UMTS radio performances and supports the enhanced High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) solutions through easy software upgrade. 9326 d2U V2 传递高 UMTS 射频性能并通过简易的软件升级即可支持加强型高速下行链路分组接入 (HSDPA)以及高速上行链路分组接入 (HSUPA)解决方案。 The Alcatel-Lucent 9326 d2U V2 solution is compliant with the Common Protocol Radio Interface (CPRI). 阿尔卡特朗讯 9326 d2U V2 解决方案符合通用协议射频接口 (CPRI)。 9326 d2U V2 enclosure 9326 d2U V2 外壳 The 9326 d2U V2 provides the operators with a suited solution whatever the site constraints. 9326 d2U V2 为操作员针对每种站点限制均提供了合适的解决方案。 The 9326 d2U V2 can be installed in a standalone indoor mode or in an existing indoor or outdoor Alcatel-Lucent 9100 Base Station cabinet for Multi-Standard configuration. 9326 d2U V2 能以独立的室内模式安装或针对多标准配置安装在现有的室内或室外阿尔卡特朗讯 9100 基站。 Moreover, the 9326 d2U V2 can be integrated in a small or a medium Power Supply Unit (PSU) outdoor cabinet. 此外， 9326 d2U V2 还可以集成到一个小的或中等电源单元 (PSU)的室外机柜。 The following figure shows an outside view of the 9326 d2U V2. 下图显示了 9326 d2U V2 的外观图。 Figure 1 Outside view of the 9326 d2U V2 图 1 9326 d2U V2 的外观图 14 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 6 9326 d2U V2 hardware presentation 6 9326 d2U V2 硬件演示 The 9326 d2U V2 is built around the following components: 9326 d2U V2 建立在以下部件的周围： * a mechanical enclosure (including two fans), compatible with standard 19-inch rack installation *机械外壳（含两个风扇），与标准 19机架安装相兼容 * a digital shelf including the digital modules and the associated digital backplane *数字货架包括数字模块和相关的数字背板 * a commissioning module located on the right hand side of the digital shelf *位于数字货架右侧上的调试模块 The following figure shows a front view of the 9326 d2U V2 equipped with iCCM-U. 下图显示了配有 iCCM-U 的 9326 d2U V2 的正视图。 Figure 2 9326 d2U V2 front view (with iCCM-U) 图 2 9326 d2U V2 正视图（含 iCCM-U） The following figure shows a front view of the 9326 d2U V2 equipped with xCCM-U. 下图显示了配有 xCCM-U 的 9326 d2U V2 的正视图。 Figure 3 9326 d2U V2 front view (with xCCM-U) 图 3 9326 d2U V2 正视图（含 xCCM-U） 15 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 7 9326 d2U power up and power down procedures 7 9326 d2U 加电和掉电步骤 This part describes how to power up and power down the 9326 d2U V2 rack. 本部分描述了如何对 9326 d2U V2 机架加电和掉电。 16 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 7.1 Powering up a 9326 d2U V2 7.1 为一个 9326 d2U V2 加电 Perform the following procedure to power up a 9326 d2U V2. 执行以下步骤为 9326 d2U V2 加电。 Initial check 初始检查 On the RUC module, check that the power switch is in the 0 position. 在 RUC 模块上，检查电源开关处于“ 0”位置。 Figure 4 Power switch on the RUC front panel 图 4 RUC 前面板上的电源开关 Procedure 步骤 Step Action 步骤 动作 1. At the operator DC power supply, put the site circuit breaker of the 9326 d2U V2 in the ON position. 1. 在操作员直流电源处，将 9326 d2U V2 的断路器置于“ ON”位置。 17 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 2. On the RUC module, put the power switch in the 1 position. 2. 在 RUC 模块上，将电源开关 置于“ 1”位置。 3. Check that the fans are starting up. 3. 检查风扇是否已启动。 4. On the iCCM-U and on each iCEM-U/xCEM-U, check that: 4. 在 iCCM-U 上以及每个 iCEM-U/xCEM-U 上，检查： * the green LED is ON. * 绿色 LED 亮起。 * the red LED is OFF. * 红色 LED 熄灭。 End 结束 18 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 7.2 Powering down a 9326 d2U V2 7.2 为一个 9326 d2U V2 掉电 Perform the following procedure to power down a 9326 d2U V2. 执行以下步骤为 9326 d2U V2 掉电。 Procedure 步骤 Step Action 步骤 动作 1. Preliminary operation: make sure that the btsSiteManager object is locked. 1. 初步操作：确保 btsSiteManager 对象已“锁定”。 2. On the RUC module, put the power switch in the 0 position. 2. 在 RUC 模块上，将电源开关置于“ 0”位置。 Figure 5 Power switch on the RUC front panel 图 5 RUC 前面板上的电源开关 3. Check that the green or red LED on the iCCM-U and on each iCEM-U/xCEM-U is OFF. 3. 检查 iCCM-U 上以及每个 iCEM-U/xCEM-U 上的绿色或红色 LED 是否熄灭。 4. Check that the fans are stopping down. 4. 检查风扇是否停转。 19 Copyright (C) 2008 Alcatel-Lucent Maintenance Guide 版权 (C) 2008 阿尔卡 特朗讯 维护指南 5. At the operator DC power supply, put the site circuit breaker of the 9326 d2U V2 in the OFFposition. 5. 在操作员直流电源处，将 9326 d2U V2 的场地断路器置于“ OFF”位置。 End 结束 20 NN-20500-204 02.01/EN Preliminary September 2008 Copyright (C) 2008 Alcatel-Lucent NN-20500-204 02.01/英文初稿 2008 年 9 月版权 (C)2008 阿尔卡特朗讯 8 9326 d2U V2 corrective maintenance procedures 8 9326 d2U V2 校正维护步骤 This part contains the replacement procedures applicable to the 9326 d2U V2 rack. 本部分包含