BIGIP V9.3.0 Hotfix3 安装操作指导-20081030-A.doc

Document TitleSecurity Level: 资料编码产品名称使用对象产品版本编写部门资料版本1.00BIGIP V9.3.0 Hotfix3 安装操作指导拟 制：日 期：审 核：日 期：审 核：日 期：批 准：日 期：华 为 技 术 有 限 公 司版权所有 侵权必究目 录1.取安装包32.对现场设备主、备设备进行检查33.备份当前系统配置44.安装HotFix345.hotfix 安装输出例子51. 取安装包请直接到以下ftp网站进行下载：5/hotfix/bigip/9.3.0_HF3/具体文件名Hotfix-BIGIP-9.3.0-194.1-HF3.im.md5、Hotfix-BIGIP-9.3.0-194.1-HF3.im。2. 对现场设备主、备设备进行检查对现场F5主备设备分别进行检查，包括以下内容，确认主、备机当前工作状态是正常的。序号检查项目图形界面或命令行状态结果1告警灯状态不需执行命令观察系统面板状态灯，是否有红色维修报警灯亮？Normal Abnormal 2双机状态灯与前一天比较，是否发生过主备切换？Normal Abnormal 3液晶显示板告警信息是否有告警信息Normal Abnormal 4Logs-系统是否有警告/错误?Normal Abnormal 5Logs-Local Traffic是否有警告/错误?Normal Abnormal 6节点与服务运行状态Overview-Statistics是否有节点或服务异常中断？Normal Abnormal 7Pool成员流量分配情况是否按设定的负载均衡处法在Pool成员之间分配。(ACC不需要这一步)。Normal Abnormal 8CPU使用情况 Overview-PerformanceCPU实际利用率_%系统是否资源不够(id Performance 系统是否内存不够内存使用百分率_%Normal Abnormal 9网络流量Overview-Performance流量情况跟以往网络流量相比是否正常Normal Abnormal 10双机配置是否同步配置是否有作过修改，修改后双机是否作配置同步Normal Abnormal 3. 备份当前系统配置在确认当前主备机工作状态正常后，a) 分别备份主机/备机的配置，并把ucs配置文件备份在自己PC上。具体操作步骤如下：i. 在web页面上，进入system-archives菜单，点击createii. 输入创建的ucs文件名，点击finished，然后okiii. 点击创建的ucs，download下创建的ucs保存到自己的电脑上a) 备份完成后，在主设备上使用sync to peer将主机配置同步到备机设备。具体操作步骤如下：i. 进入system-High Avialability菜单，点击ConfigSyncii. 进入同步页面点击Synchronize TO Peerb) 再次确认主备设备均正常工作。c) 再次备份主机/备机上的ucs格式配置文件。具体操作步骤同a)4. 安装HotFix3使用SSH Secure File Transfer Client等Sftp工具将两个文件分别上传到主机、备机/var/tmp目录下，同时将使用命令md5sum Hotfix-BIGIP-9.3.0-194.1-HF3.im 校验文件完整性，并与原文件Hotfix-BIGIP-9.3.0-194.1-HF3.im.md5值对比，确认安装包无误，然后进行安装。（注意，一定要通过console或ssh到F5的管理接口IP地址来运行im命令，否则在安装过程中ssh的session会中断）具体操作步骤如下：a) 通过PC连接到F5的备机console上，确认console登录正常b) SSH登录到F5备机，进入/var/tmp目录c) 将Hotfix-BIGIP-9.3.0-194.1-HF3.im.md5、Hotfix-BIGIP-9.3.0-194.1-HF3.im通过sftp等方式上传到BIGIP的/var/tmp目录下d) 输入cat Hotfix-BIGIP-9.3.0-194.1-HF3.im.md5，会出现一串数字e) 输入md5sum Hotfix-BIGIP-9.3.0-194.1-HF3.im，得到一串数字，对比两串数字，如果一样继续操作，如果不一样请检查补丁的完整性。f) 用b version命令查看当前的版本信息，并保存到PC机的一个文本文件上。g) 通过console进入F5，进行/var/tmp目录，im Hotfix-BIGIP-9.3.0-194.1-HF3.im，在备机上安装Hotfix3。h) 安装完成后，使用命令./full_box_reboot命令将备机重启，重新启动后输入命令b version,可以查看版本信息已经多了hotfix3的补丁和一排CR。i) 备机重新启动后，确认备机状态、业务应用正常。j) 把业务切换到备机上，测试业务，在业务正常后再进行下一步操作。k) 使用a)-i)步骤对主机进行同样的操作。l) 重新启动后，把业务切换回主机。m) 对业务应用进行持续观察。5. hotfix 安装输出例子 1) 安装hotfix:rootf5:Active tmp # cat Hotfix-BIGIP-9.3.0-194.1-HF3.im.md5.txt 3773ce255cfd5d41056dcc4ee9591267 Hotfix-BIGIP-9.3.0-194.1-HF3.im rootf5:Active tmp # md5sum Hotfix-BIGIP-9.3.0-194.1-HF3.im 3773ce255cfd5d41056dcc4ee9591267 Hotfix-BIGIP-9.3.0-194.1-HF3.imrootf5:Active tmp # im Hotfix-BIGIP-9.3.0-194.1-HF3.im Available KiB blocks in root partition: 2774828Checking integrity of packages./tmp/rpmdisk.xoZdcx/RPMS/i386/mod_jk2-2.0.4-94.0.i386.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/TS-mng-scripts-5.0.0-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/bcm56xxd-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/bigdbd-1.1-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/bigpipe-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/bind-9.3.4.P1-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/bind-utils-9.3.4.P1-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/cavium_utils-1.0-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/dmon-1.0-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/gtm-1.1-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/gtm-big3d-1.1-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/lacpd-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/mcpd-1.0-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/mod_auth_pam-1.1.1-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/openssl-0.9.7l-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/php-4.4.4-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/subdomain_config-1.0.0-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/tmm-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/tmm-debug-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/xconfig-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/i686/zrd-1.0.F5-94.0.i686.rpm /tmp/rpmdisk.xoZdcx/RPMS/noarch/TS-database-5.0.0-94.0.noarch.rpm /tmp/rpmdisk.xoZdcx/RPMS/noarch/f5-webui-1.0-94.0.noarch.rpm /tmp/rpmdisk.xoZdcx/RPMS/noarch/sccp-software-1.0-94.0.noarch.rpm Stopping processes, please wait.httpd (pid 3238 3237 3236 3234 1162 1160 1144) is running.Stopping httpd: OK /tmp/rpmdisk.xoZdcx /shared/tmpSearching for relevant packages.php skipped; it is not applicable to this systemTS-mng-scripts skipped; it is not applicable to this systemTS-database skipped; it is not applicable to this systemUpgrading installed packages. Beginning single-package install pass 1.Preparing packages for installation.mod_jk2-2.0.4-94.0Preparing packages for installation.bcm56xxd-1.0.F5-94.0Preparing packages for installation.bigdbd-1.1-94.0Info: adding gtm.maxpersistsyncspersecond section in config file.Info: adding gtm.maxsize section in config file.New database definition sucessfullymerged into active database.Preparing packages for installation.bigpipe-1.0.F5-94.0Preparing packages for installation.bind-9.3.4.P1-94.0Preparing packages for installation.bind-utils-9.3.4.P1-94.0Preparing packages for installation.cavium_utils-1.0-94.0Preparing packages for installation.dmon-1.0-94.0Preparing packages for installation.gtm-1.1-94.0Preparing packages for installation.gtm-big3d-1.1-94.0Checking active big3d version.Active big3d (78.0.0) is out of dateInstalling new big3d (94.0.0).Preparing packages for installation.lacpd-1.0.F5-94.0Preparing packages for installation.mcpd-1.0-94.0Preparing packages for installation.mod_auth_pam-1.1.1-94.0Preparing packages for installation.openssl-0.9.7l-94.0Preparing packages for installation.subdomain_config-1.0.0-94.0Preparing packages for installation.xconfig-1.0.F5-94.0Preparing packages for installation.zrd-1.0.F5-94.0Preparing packages for installation.f5-webui-1.0-94.0Preparing packages for installation.sccp-software-1.0-94.0 Beginning single-package install pass 2. Upgrading all packages.Preparing packages for i