关 键 词：

机械毕业设计全套

资源描述：

JDC01-027@基于PLC的堆垛机自动控制系统,机械毕业设计全套

内容简介：

黑龙江工程学院本科生毕业设计 I 摘 要 本文设计了一套基于 PLC控制的 罐装啤酒 堆垛机控制系统，实现堆垛过程的自动化控制 ,从而提高堆垛效率，降低设备故障率 。 文 中主要从硬件及软件 两方面对系统进 行了设计。硬件部分包括系统各组成部分的选型及系统的硬件接线部分设计 。控制系统由可编程控制器、电机组以及各种传感器组成。控制系统中采用了三菱公司的 FX2N-48MR可编程控制器，作为控制系统的核心控制部件 ， 其 功能强大、性能稳定可靠。软件设计包括流程图的和梯形图的设计。 最后用三菱的 PLC调试和仿真软件对梯形图进行调试。 仿真调试表明：该系统能够对 堆垛过程实现自动控制，保证堆垛机 处于 最佳运行状态，提高生产管理水平。 关键词 ： 堆垛机； PLC； 传感器 ；模拟仿真； 梯形图 nts黑龙江工程学院本科生毕业设计 II ABSTRACT This paper designs a set of stack-crane stacking control system based on PLC control system, realize process automation control. The efficiency of stack-crane stacking can be promoted. And the failure rate of the instrument will be reduced. The hardware and software were designed in the article. In hardware design, it includes the selection of each parts composed the system and the hardware connection of each part. The control system is consisted of programmable controller, the electric generator and various sensors. Control system adopted mitsubishis FX2N-48MR PLC control system as the core device, which has good performance of powerful function, stable and reliable performance. Finally, we use Mitsubishi PLC simulation software for testing and debugging of ladder diagram. Simulation result shows that the system can realize automatic control of stacking process, which ensure stacker operation is in best operation state, and improve the production management level. Ke