Cisco 2811 Router 命令集(中英对照).docxVIP

Cisco 2811 Router 命令集用户模式下： Session number to resume恢复会话数connect Open a terminal connection打开终端连接disable Turn off privileged commands关闭特权命令disconnect Disconnect an existing network connection断开现有的网络连接enable Turn on privileged commands打开特权命令exit Exit from the EXEC从执行退出logout Exit from the EXEC从执行退出ping Send echo messages发送回声信息resume Resume an active network connection恢复主动网络连接show Show running system information显示运行系统信息ssh Open a secure shell client connection打开安全壳客户端连接telnet Open a telnet connection打开telnet连接terminal Set terminal line parameters设置终点线参数traceroute Trace route to destination跟踪路由到目的地特权模式下： Session number to resume恢复会话数auto Exec level Automation执行自动化水平clear Reset functions复位功能clock Manage the system clock管理系统时钟Cisco 2811 Router 命令集特权模式下：configure Enter configuration mode输入配置模式connect Open a terminal connection打开终端连接copy Copy from one file to another从一个文件复制到另一个文件debug Debugging functions (see also undebug)调试功能（参见“undebug”）delete Delete a file删除一个文件dir List files on a filesystem文件系统中的列表文件disable Turn off privileged commands关闭特权命令disconnect Disconnect an existing network connection断开现有的网络连接enable Turn on privileged commands打开特权命令erase Erase a filesystem删除一个文件系统exit Exit from the EXEC从执行退出logout Exit from the EXEC从执行退出mkdir Create new directory创建新目录more Display the contents of a file显示文件的内容no Disable debugging informations禁用调试信息ping Send echo messages发送回声信息reload Halt and perform a cold restart停止并执行冷启动resume Resume an active network connection恢复主动网络连接rmdir Remove existing directory删除现有目录Cisco 2811 Router 命令集特权模式下：send Send a message to other tty lines将消息发送到其他tty线路setup Run the SETUP command facility运行安装命令程序show Show running system information显示运行系统信息ssh Open a secure shell client connection打开安全壳客户端连接telnet Open a telnet connection打开telnet连接terminal Set terminal line parameters设置终点线参数traceroute Trace route to destination跟踪路由到目的地undebug Disable debugging functions (see also debug)禁用调试功能（参见“调试”）vlan Configure VLAN parameters配置VLAN参数write Write running configuration to memory, network, or terminal写入内存、网络或终端的运行配置全局配置模式下：aaa Authentication, Authorization and Accounting.认证，授权和会计access-list Add an access list entry添加访问列表条目banner Define a login banner定义登录横幅boot Modify system boot parameters修改系统启动参数cdp Global CDP configuration subcommands全球CDP配置分区class-map Configure Class Map配置类映射clock Configure time-of-day clock一天钟的配置时间Cisco 2811 Router 命令集全局配置模式下：config-register Define the configuration register定义配置寄存器crypto Encryption module加密模块dial-peer Dial Map (Peer) configuration commands拨号地图（对等）配置命令do To run exec commands in config mode运行exec命令在配置模式dot11 IEEE 802.11 config commandsIEEE 802.11的配置命令enable Modify enable password parameters修改启用密码参数end Exit from configure mode退出配置模式ephone Define ethernet phone定义以太网电话ephone-dn Configure ephone phone lines (Directory Numbers)配置和电话线（电话号码）exit Exit from configure mode退出配置模式flow Global Flow configuration subcommands全球流动配置的子命令hostname Set systems network name设置系统的网络名称interface Select an interface to configure选择一个接口来配置ip Global IP configuration subcommands全球IP配置的子命令ipv6 Global IPv6 configuration commands全球IPv6配置命令key Key management密钥管理line Configure a terminal line配置终端线路logging Modify message logging facilities修改邮件日志记录设备login Enable secure login checking启用安全登录检查Cisco 2811 Router 命令集全局配置模式下：mac-address-table Configure the MAC address table配置地址表no Negate a command or set its defaults否定命令或设置默认值ntp Configure NTP配置NTPparameter-map Parameter map参数图parser Configure parser配置分析器policy-map Configure QoS Policy Map配置服务质量策略图port-channel EtherChannel configuration以太通道配置priority-list Build a priority list建立优先级列表privilege Command privilege parameters命令特权参数queue-list Build a custom queue list建立自定义队列列表radius-server Modify Radius query parameters修改半径查询参数router Enable a routing process启用路由过程secure Secure image and configuration archival commands安全的图像和配置档案命令security Infra Security CLIs红外线安全”service Modify use of network based services修改使用基于网络的服务snmp-server Modify SNMP engine parameters修改SNMP引擎参数spanning-tree Spanning Tree Subsystem生成树子系统tacacs-server Modify TACACS query parameters修改和查询参数telephony-service Configure Cisco Unified Communications Manager Express配置思科统一通信管理器的表达Cisco 2811 Router 命令集全局配置模式下：username Establish User Name Authentication建立用户名称验证vpdn Virtual Private Dialup Network虚拟拨号专用网络vpdn-group VPDN group configurationVPDN组配置zone FW with zoningFW与分区zone-pair Zone pair command区域对命令接口配置模式下：arp Set arp type (arpa, probe, snap) or timeout设置ARP型（ARPA，探针卡）或超时bandwidth Set bandwidth informational parameter设置带宽信息参数cdp CDP interface subcommandsCDP接口子命令channel-group Add this interface to an Etherchannel group添加此接口的以太通道组crypto Encryption/Decryption commands加密/解密命令custom-queue-list Assign a custom queue list to an interface将自定义队列列表分配给一个接口delay Specify interface throughput delay指定接口吞吐量延迟description Interface specific description接口具体描述duplex Configure duplex operation配置双工操作exit Exit from interface configuration mode退出接口配置模式fair-queue Enable Fair Queuing on an Interface允许在一个接口上启用公平队列hold-queue Set hold queue depth设置队列深度ip Interface Internet Protocol config commands接口互联网协议配置命令Cisco 2811 Router 命令集接口配置模式下：ipv6 IPv6 interface subcommandsIPv6接口子命令mac-address Manually set interface MAC address手动设置接口的苹果地址mtu Set the interface Maximum Transmission Unit (MTU)设置接口的最大传输单元（MTU）no Negate a command or set its defaults否定命令或设置默认值pppoe pppoe interface subcommandsPPPoE接口子命令priority-group Assign a priority group to an interface将优先级组分配给一个接口se