机构名称广东出入境检验检疫局检验检疫技术中心

1、ISO/IEC 17020 认可证书 CNAS-PD20/11-B/2机构名称：广东出入境检验检疫局检验检疫技术中心注册号：IB0411地 址：A：广东省广州市珠江新城花城大道66号B塔B：广东省广州市天河工业园建工路19号获准认可能力索引序号地址能力范围评审类型更新时间1A授权签字人(中文)初评2014年11月03日2授权签字人(英文)初评2014年11月03日3A认可的检查能力范围(中文)初评2014年11月03日4认可的检查能力范围(英文)初评2014年11月03日5B授权签字人(中文)初评2014年11月03日6授权签字人(英文)初评2014年11月03日7B认可的检查能力范围(中文)

2、初评2014年11月03日8认可的检查能力范围(英文)初评2014年11月03日Name：Guangdong Entry-Exit Inspection & Quarantine Bureau Inspection & Quarantine Technology CenterRegistration No.：IB0411 ADDRESS：A: Tower B, No.66, Huacheng Avenue, Zhujiang Xincheng, Guangzhou, Guangdong, ChinaB：No.19,Jiangong Road, Science and Technology Pa

3、rk, Tianhe, Guangzhou, ChinaINDEX OF ACCREDITED SIGNATORIES No.AddressRangeTypeUpdate date1AApproved signatories (Chinese)Initial assessment2014-11-032Approved signatories (English)Initial assessment2014-11-033AACCREDITED INSPECTION(Chinese)Initial assessment2014-11-034ACCREDITED INSPECTION(English)

4、Initial assessment2014-11-035BApproved signatories (Chinese)Initial assessment2014-11-036Approved signatories (English)Initial assessment2014-11-037BACCREDITED INSPECTION(Chinese)Initial assessment2014-11-038ACCREDITED INSPECTION(English)Initial assessment2014-11-03中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS

5、IB0411）名称:广东出入境检验检疫局检验检疫技术中心 地址：广东省广州市珠江新城花城大道66号B塔类型：A签发日期：2014年11月03日 有效期至：2017年11月02日更新日期：2014年11月03日附件1 认可的授权签字人及领域序号姓 名授权签字领域备 注1陈胜家用及类似用途设备工厂检查项目2肖前货物（物质）危险性识别检查、塑料、金属材料、钢丝绳和紧固件产品检查项目3翟翠萍货物（物质）危险性识别检查、塑料、金属材料、钢丝绳和紧固件产品检查项目4李成明货物（物质）危险性识别检查、塑料、金属材料、钢丝绳和紧固件产品检查项目5彭速标货物（物质）危险性识别检查、塑料、金属材料、钢丝绳和紧固件

6、产品检查项目6郭仁宏危险品包装检查项目7陆瑞强危险品包装检查项目8张震坤工业机械、家用和类似用途电器产品、信息技术及电子产品、电器附件产品和灯具产品检查项目9陈平工业机械、家用和类似用途电器产品、信息技术及电子产品、电器附件产品和灯具产品检查项目CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS IB0411) NAME:Guangdong Entry-Exit Inspection & Quaranti

7、ne Bureau Inspection & Quarantine Technology Center ADDRESS:Tower B, No.66, Huacheng Avenue, Zhujiang Xincheng, Guangzhou, Guangdong, ChinaType：ADate of Issue:2014-11-03 Date of Expiry:2017-11-02 Date of Update：2014-11-03APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPEName Authorized Scope of SignatureNo

8、te1Chen ShengHousehold and Similar Use Appliances factory inspection2Xiao QianCargo/chemicals verification, Plastic，Metal materials , Wire rope and Fasteners products Inspection3Zhai CuipingCargo/chemicals verification, Plastic，Metal materials , Wire rope and Fasteners products Inspection4Li Chengmi

9、ngCargo/chemicals verification, Plastic，Metal materials , Wire rope and Fasteners products Inspection5Peng SubiaoCargo/chemicals verification, Plastic，Metal materials , Wire rope and Fasteners products Inspection6Guo RenhongPackaging of dangerous goods inspection7Lu RuiqiangPackaging of dangerous go

10、ods inspection8Zhang zhenkunIndustry Machine, Household and similar electrical appliances, Information technology equipment, Electrical accessories and Luminaries Inspection9Chen pingIndustry Machine, Household and similar electrical appliances, Information technology equipment, Electrical accessori

11、es and Luminaries Inspection 中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS IB0411）名称:广东出入境检验检疫局检验检疫技术中心 地址：广东省广州市珠江新城花城大道66号B塔类型：A认可依据：ISO/IEC 17020以及CNAS特定认可要求签发日期：2014年11月03日 有效期至：2017年11月02日更新日期：2014年11月03日附件2 认可的检查能力范围序号检查领域检查项目依据的检查标准/方法限制范围或说明序号名称1工厂检查1家用及类似用途设备工厂检查强制性产品认证实施规则 家用及类似用途设备 CNCA-C07-01:20142货

12、物/化学品鉴定1货物（物质）危险性识别检查联合国关于危险货物运输的建议书 规章范本(第18修订版) ST/SG/AC.10/1/Rev.18 国际海运危险货物规则(36-12版IMO IMDG code） ICAO 危险物品安全航空运输技术细则 (2013-2014版) 国际航空运输协会(IATA) 危险品规则（55nd） 危险化学品名录（2002） 危险货物品名表 GB 12268-2012检查范围： 普通货物 第一类爆炸品(只做筛选)； 第二类气体； 第三类易燃液体； 第四类易燃固体、自燃物质、遇水放出易燃气体物质； 第五类氧化性物质和有机过氧化物(只做筛选)； 第六类毒害品和感染性物质；

13、 第七类放射性物质(只做筛选)； 第八类腐蚀品； 第九类杂项危险品；具有多重危险性的危险品。2货物/化学品鉴定2化学品危险性分类、安全技术说明书（MSDS/ SDS）及危险公示标签检查联合国关于危险货物运输的建议书 规章范本(第18修订版)ST/SG/AC.10/1/ Rev.18 联合国全球化学品统一分类和标签制度(第五修订版) ST/SG/AC.10/30/Rev.5 欧盟物质和混合物的分类、标签和包装法规REGULATION（EC）No 1272/2008 欧盟物质和混合物的分类、标签和包装法规第一次修正案COMMISSION REGULATION (EC)No 790/2009 化学品

14、分类、警示标签和警示性说明安全规范 GB 20576-2006GB 20599-2006 GB 20601-2006GB 20602-2006 危险货物品名表 GB 12268-2012 危险化学品名录(2002) 化学品分类和危险性公示 通则 GB 13690-2009 化学品安全标签编写规定 GB 15258-2009 化学品安全技术说明书 内容和项目顺序 GB/T 16483-2008 化学品安全技术说明书内容和项目顺序 ISO 11014:2009利用试验数据和已知信息检查化学品的物理危险、健康危险和环境危险3危险品包装1抽样联合国关于危险货物运输的建议书 规章范本(第18修订版) S

15、T/SG/AC.10/1/Rev.18 ICAO 危险物品安全航空运输技术细则 (2013-2014版) IATA DGR 55th 航空危险货物运输规则 第55版 IMDG CODE 2012 EDITION 国际海运危险货物规则 (36-12版IMO IMDG code） 公路运输危险货物包装检验安全规范GB 19269-2009 水路运输危险货物包装检验安全规范GB 19270-2009 铁路运输危险货物包装检验安全规范GB 19359-2009 空运危险货物包装检验安全规范GB 19433-2009 出口危险货物包装检验规程 第1部分:总则 SN/T 0370.1-2009 出口危险货

16、物包装检验规程 第2部分：性能检验 SN/T 0370.2-2009 出口危险货物包装检验规程 第3部分：使用鉴定 SN/T 0370.3-20122性能鉴定3使用鉴定4塑料1数量非正品塑料检验鉴定规程SN/T 2258-2009 非正品塑料检验工作规范CMMWI002-00 衡器鉴重工作规范CMMWI003-002重量3包装4外观检查5品质检验5金属材料1数量钢材残损检验鉴定规程 SN/T3468.18-2013 金属材料检验规程 CMMWI001-00 衡器鉴重工作规范CMMWI003-002重量3包装4外观5品质检验6残损检验6钢丝绳1数量钢丝绳包装、标志及质量证明书的一般规定 GB/T

17、 2104-2008 电梯用钢丝绳GB 8903-2005 (ISO/FDIS 4344:2003) 重要用途钢丝绳GB 8918-2006 (ISO 3154:1988) 一般用途钢丝绳GB/T 20118-2006 (ISO/DIS 2408:2002) 衡器鉴重工作规范CMMWI003-002重量3包装4外观5性能7紧固件1数量紧固件 验收检查 GB/T 90.1-2002 紧固件标志和包装 GB/T 90.2-20022包装3外观4性能8工业机械1外观进口成套设备检验规程SN/T 0237-2009 机械安全：机器电气设备 第1部分：一般要求IEC 60204-1-2009 电气产品检

18、查通用规程DQ02-34-1-002包装3数量4规格5功能6安全性9家用和类似用途电器产品1外观进出口家用和类似用途电器检验规程 第1部分：通用要求SN/T 1589.1-2012 电气产品检查通用规程DQ02-34-1-002包装3数量4规格5功能6安全性10信息技术及电子产品1外观进出口信息技术设备检验规程 第1部分：通用要求 SN/T 1429.1-2012 电气产品检查通用规程DQ02-34-1-002包装3数量4规格10信息技术及电子产品5功能进出口信息技术设备检验规程 第1部分：通用要求 SN/T 1429.1-2012 电气产品检查通用规程DQ02-34-1-006安全性11电器

19、附件产品1外观进出口电器附件检验规程 第1部分：通用要求 SN/T 3020.1-2011 电气产品检查通用规程DQ02-34-1-002包装3数量4规格5功能6安全性12灯具产品1外观进出口灯具检验规程 第2部分：通用要求 SN/T 1588.2-2013 电气产品检查通用规程DQ02-34-1-002包装3数量4规格5功能6安全性No. CNAS IB0411 第12页 共57页Should there be any inconsistencies between Chinese and English versions of the scope of accreditation, the

20、 Chinese version shall prevail in that the English version is provided by the conformity assessment body and is for reference only.ISO/IEC 17020 认可证书 CNAS-PD20/11-B/2 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS IB0411) NAM

21、E:Guangdong Entry-Exit Inspection & Quarantine Bureau Inspection & Quarantine Technology Center ADDRESS:Tower B, No.66, Huacheng Avenue, Zhujiang Xincheng, Guangzhou, Guangdong, ChinaType：AAccreditation Criteria: ISO/IEC 17020 and relevant requirements of CNASDate of Issue:2014-11-03 Date of Expiry:

22、2017-11-02 Date of Update：2014-11-03APPENDIX 2 ACCREDITED INSPECTIONField of InspectionType and Range of InspectionStandard, Method and ProceduresRestriction or NoteName1Factory inspection1Household and Similar Use Appliances factory inspectionImplementation rules for compulsory certification of pro

23、ducts Household and Similar Use Appliances CNCA-C07-01:20142Cargo/chemicals verification1Inspection for dangerous properties of transport goodsUNITED NATIONS Recommendations on the TRANSPORT OF DANGEROUS GOODS Model Regulations(Rev. 18) ST/SG/AC.10/1/Rev.18 IMO IMDG CODE (36-12 Edition) ICAO Technic

24、al Instructions for the Safe Transport of Dangerous Goods by Air (2013-2014 Edition) IATA DGR (55th Edition) List of Dangerous Chemical Substances (2002) List of Dangerous Goods GB 12268-2012Inspection range: General Goods Class 1 Explosives（Accredited only for screening）; Class 2 Gases; Class 3 Fla

25、mmable Liquids; Class 4 Flammable Solids, Self-reactive Substances Substances Liable to Spontaneous Combustion Substances Which, in contact with Water, Emit Flammable Gases; Class 5 Oxidizing Substances and Organic Peroxides（Accredited only for screening）; Class 6 Toxic and Infectious Substances; Cl

26、ass 7 Radioactive Material（Accredited only for screening）; Class 8 Corrosives; Class 9 Miscellaneous Dangerous Goods; Articles/Substances with Multiple Hazards2Cargo/chemicals verification2Classification of chemicals, safety data sheet(SDS) & chemicals labelUNITED NATIONS Recommendations on the TRAN

27、SPORT OF DANGEROUS GOODS Model Regulations(Rev. 18) ST/SG/AC.10 /1/Rev.18 Globally Harmonized System of Classification and Labeling of Chemicals(GHS Rev.5) ST/SG/AC.10/30/Rev.5 European Regulation (EC) No 1272/2008 on Classification, Labeling and Packaging of Substances and Mixtures (CLP Regulation)

28、 COMMISSION REGULATION (EC) No 790/2009 Safety rules for classification, precautionary labeling and precautionary statements of chemicals GB 20576-2006GB 20599-2006 GB 20601-2006GB 20602-2006 List of Dangerous Goods GB 12268-2012 List of Dangerous Chemical Substances (2002) General rule for classifi

29、cation and hazard communication of chemicals GB 13690-2009 General rules for preparation of precautionary label for chemicals GB 15258-2009 Safety data sheet for chemical products- Content and order of sections GB/T 16483-2008 Safety data sheet for chemical products- Content and order of sections IS

30、O 11014:2009Using the experimental data and known information to inspect the physical hazards, health hazards& environmental hazards of chemicals3Packaging of dangerous goods1SamplingUNITED NATIONS Recommendations on the TRANSPORT OF DANGEROUS GOODS Model Regulations(Rev. 18) ST/SG/AC.10/1/Rev.18 IC

31、AO Technical Instructions for the Safe Transport of Dangerous Goods by Air (2013-2014 Edition) Dangerous Goods Regulations 2014 55th Edition (IATA) IMDG CODE 2012 EDITION Safety code for inspection of packaging of dangerous goods transported by road GB 19269-2009 Safety code for inspection of packag

32、ing of dangerous goods transported by water GB 19270-2009 Safety code for inspection of packaging of dangerous goods transported by railway GB 19359-2009 Safety code for inspection of packaging of dangerous goods transported by air GB 19433-2009 Rules for the inspection of packaging for export dange

33、rous goods-Part 1:General specifications SN/T 0370.1-2009 Rules for the inspection of packaging for export dangerous goods-Part 2:Performance test SN/T 0370.2-2009 Rules for the inspection of packaging for export dangerous goods-Part 3:Use appraisal SN/T 0370.3-20122Performance test3Use appraisal4Pl

34、astic1QuantityRules for the Inspection and identification of off-grade plastic SN/T 2258-2009 Guide of the Inspection and identification for off-grade plastic CMMWI002-00-2014 Rules for the Weight Survey by Weighing Instrument CMMWI003-00-20142Weight3Packing4Appearance5Quality5Metal materials1Quanti

35、tyRules for the damage survey of steel materials. Part 1 Steel sheets and strips SN/T3468.18-2013 Rules for inspection of metal materials CMMWI001-00-2014 Rules for the Weight Survey by Weighing Instrument CMMWI003-00-20142Weight3Packing4Appearance5Quality6damage survey6Wire rope1QuantitySteel wire

36、ropes - Packing, marking and certificate - General requirements GB/T 2104-2008 Steel wire ropes for elevators GB 8903-2005 (ISO/FDIS 4344:2003) Steel wire ropes for important purpose GB 8918-2006 (ISO 3154:1988) Steel wire ropes for general purpose GB/T 20118-2006 (ISO/DIS 2408:2002) Rules for the W

37、eight Survey by Weighing Instrument CMMWI003-00-20142Weight3Packing4Appearance5Quality7Fasteners1QuantityFasteners-Acceptance inspection GB/T90.1-2002 Fasteners- Marking and packing GB/T 90.2-20022Packing3Appearance4Quality8Industry Machine1AppearanceRules for the inspection of complete set of equip

38、ment or whole plant for import SN/T 0237-2009 Safety of machinery Electrical equipment of machines Part 1: General requirements IEC 60204-1-2009 Electrical product inspection procedure DQ02-34-1-002Packing3Quantity4Specification8Industry Machine5FunctionRules for the inspection of complete set of eq

39、uipment or whole plant for import SN/T 0237-2009 Safety of machinery Electrical equipment of machines Part 1: General requirements IEC 60204-1-2009 Electrical product inspection procedure DQ02-34-1-006Safety9Household and similar electrical appliances1AppearanceRules for the inspection of household

40、and similar electrical appliances for import and export-Part 1:General requirements SN/T 1589.1-2012 Electrical product inspection procedure DQ02-34-1-002Packing3Quantity4Specification5Function6Safety10Information technology equipment1AppearanceRules for the inspection of information technology equi

41、pment for import and export-Part 1:General requirements SN/T 1429.1-2012 Electrical product inspection procedure DQ02-34-1-002Packing3Quantity4Specification5Function6Safety11Electrical accessories1AppearanceRules for the inspection of electrical accessories for import and export-Part 1:General requi

42、rement SN/T 3020.1-2011 Electrical product inspection procedure DQ02-34-1-002Packing3Quantity4Specification5Function6Safety12Luminaries1AppearanceRules for the inspection of luminaries for import and export. Part 2: General requirements SN/T 1588.2-2013 Electrical product inspection procedure DQ02-3

43、4-1-002Packing3Quantity4Specification5Function6Safety中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS IB0411）名称:广东出入境检验检疫局检验检疫技术中心 地址：广东省广州市天河工业园建工路19号类型：A签发日期：2014年11月03日 有效期至：2017年11月02日更新日期：2014年11月03日附件1 认可的授权签字人及领域序号姓 名授权签字领域备 注1郭仁宏磁性物质、蓄电池、锂电池危险性识别检查项目2陆瑞强磁性物质、蓄电池、锂电池危险性识别检查项目CHINA NATIONAL ACCREDITATION SER

44、VICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS IB0411) NAME:Guangdong Entry-Exit Inspection & Quarantine Bureau Inspection & Quarantine Technology Center ADDRESS:No.19,Jiangong Road, Science and Technology Park, Tianhe, Guangzhou, ChinaType：ADate of Issue:2

45、014-11-03 Date of Expiry:2017-11-02 Date of Update：2014-11-03APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPEName Authorized Scope of SignatureNote1Guo RenhongMagnetic materials，Battery and Lithium battery verification1Lu RuiqiangMagnetic materials，Battery and Lithium battery verification 中国合格评定国家认可委员会认

46、可 证 书 附 件（注册号：CNAS IB0411）名称:广东出入境检验检疫局检验检疫技术中心 地址：广东省广州市天河工业园建工路19号类型：A认可依据：ISO/IEC 17020以及CNAS特定认可要求签发日期：2014年11月03日 有效期至：2017年11月02日更新日期：2014年11月03日附件2 认可的检查能力范围序号检查领域检查项目依据的检查标准/方法限制范围或说明序号名称1货物（已知物质）鉴定1货物（已知物质）危险性识别检查联合国关于危险货物运输的建议书 规章范本(第18修订版) ST/SG/AC.10/1/Rev.18检查范围： 第8类腐蚀品:蓄电池国际航空运输协会 危险品规

47、则（第55版）ICAO危险物品安全航空运输技术细则2013-2014年版国际海运危险货物规则(36-12版IMO IMDG code）2货物（已知物质）危险性识别检查联合国关于危险货物运输的建议书 规章范本(第18修订版) ST/SG/AC.10/1/Rev.18检查范围： 第9类杂项危险品:锂电池国际航空运输协会 危险品规则（第55版）1货物（已知物质）鉴定2货物（已知物质）危险性识别检查ICAO危险物品安全航空运输技术细则2013-2014年版检查范围： 第9类杂项危险品:锂电池国际海运危险货物规则(36-12版IMO IMDG code）联合国关于危险货物运输的建议书 试验和标准手册 （

48、第五版修正1） （ST/SG/AC.10/11/ Amend 1 of Rev.5）3货物（已知物质）危险性识别检查联合国关于危险货物运输的建议书 规章范本(第18修订版) ST/SG/AC.10/1/Rev.18检查范围： 第9类杂项危险品:磁性物质国际航空运输协会 危险品规则（第55版）ICAO危险物品安全航空运输技术细则2013-2014年版No. CNAS IB0411 第24页 共57页Should there be any inconsistencies between Chinese and English versions of the scope of accreditati

49、on, the Chinese version shall prevail in that the English version is provided by the conformity assessment body and is for reference only.ISO/IEC 17020 认可证书 CNAS-PD20/11-B/4 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS IB04

50、11) NAME:Guangdong Entry-Exit Inspection & Quarantine Bureau Inspection & Quarantine Technology Center ADDRESS:No.19,Jiangong Road, Science and Technology Park, Tianhe, Guangzhou, ChinaType：AAccreditation Criteria: ISO/IEC 17020 and relevant requirements of CNASDate of Issue:2014-11-03 Date of Expir

51、y:2017-11-02 Date of Update：2014-11-03APPENDIX 2 ACCREDITED INSPECTIONField of InspectionType and Range of InspectionStandard, Method and ProceduresRestriction or NoteName1Cargo (Known Materials) Verification1Inspection for dangerous properties of goods （Known Materials)UNITED NATIONS Recommendation

52、s on the TRANSPORT OF DANGEROUS GOODS Model Regulations(Rev. 18) ST/SG/AC.10/1/Rev.18Class 8 Corrosives: batteryIATA Dangerous Goods Regulation(55nd Edition)ICAO Technical Instructions(2013-2014 Edition)IMO IMDG CODE (36-12 Edition)1Cargo (Known Materials) Verification2Inspection for dangerous properties of goods （Known Materials)UNITED NATIONS Recommendations on the TRANSPORT OF DANGEROUS GOODS M