AS NZS 1337 TEST REPORT 报告格式_第1页
AS NZS 1337 TEST REPORT 报告格式_第2页
AS NZS 1337 TEST REPORT 报告格式_第3页
AS NZS 1337 TEST REPORT 报告格式_第4页
AS NZS 1337 TEST REPORT 报告格式_第5页
全文预览已结束

付费下载

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、测试报告申请单位:Applicant收件日期:Date(s) SubmittedTEST REPORTDate : Report No. : M-TS- Issue : 1.0 样品信息Sample Information订单号P.O.客号Customer型号Model镜框颜色Frame Color镜片颜色Lens Color镜片类别 Category数量Quantity 测试说明Test Specification测试环境Test of Condition标准要求Standard Requirement测试时间Test Date ; %R.H.AS/NZS 1337.1-2010本次测试项目

2、Test Items测试结果Test Result检 测 员: Tested by核 检 员: Checked byPage 5 of 52.2.3 Dimension of LensesSample IDLocationLengthDepthPassFail1Right Ocular2Left Ocular3Right Ocular4Left OcularSpecification42mm32mm2.3.1 Visual Quality RequirementPassFailReasonably free of pits, scratches, greyness, watermarks, b

3、ubbles, striae, local aberrations and inclusions which could impair vision or prevent the use of the oculars for their intended purpose.2.4.4 Optical TransmittanceSample IDVisible Spectral RangeUV Spectral RangePassFailTransmittance(TV)%Ocular CategorySpectral Transmittance for Wave-Lengths 470 nm t

4、o 650 nmRelative Visual Attenuation for Signal Light Detection (Q)Value ofSpectral TransmittanceValue ofSolar UVATransmittanceRedYellowGreenBlue280 nm to315 nmOver 315 nmto 350 nm315 nm to 380 nm123Specification80%TV100%00.2 TV0.800.800.800.800.05 TVTVTV43%TV80%118%TV43%28%TV18%30.01 TV0.50TV0.50 TV

5、80%TV100%OutdoorUntinted0.01 TV0.25 TV0.25 TV2.4.5.2 Transmittance Matching for Pairs of Filters of all TypesSample IDLeft(TV)%Right(TV)%Relative Variations(TV)%PassFail123SpecificationNot differ by more than 15% of the value of the higher transmittance.2.4.6.1 Special Transmittance Requirements for

6、 Photochromic FiltersSample IDFaded State(T0)Darkened State(T1)T0/T1PassFail123SpecificationT0/T11.25.2.4.6.2 Special Transmittance Requirements Polarizing FiltersSample IDLeft OcularRight OcularLeft Ocular- Right OcularPassFail123Specification±5°±5°Left Ocular- Right Ocular6

7、6;2.4.7.2 Local Aberrations In Spherical and Astigmatic PowerSample IDLeft OcularRight OcularPassFailSpherical Power(D1+D2)/2m-1Astigmatic PowerD1-D2m-1Spherical Power(D1+D2)/2m-1Astigmatic PowerD1-D2m-1123Specification±0.090.09±0.090.09Note:D1 and D2 are the refractive powers in the two p

8、rincipal meridians.2.4.7.4 Prismatic Power DifferencePairs of OcularsSample IDHorizontal Imbalance ()cm/mVertical Imbalance ()cm/mPassFailBase InBase Out123Specification0.251.000.252.4.8 Scattered Light(Haze test)Sample IDHaze(%)PassFailLeft OcularRight Ocular123Specification3%2.4.9 Material and Sur

9、face QualityRequirementPassFailNo material or machining defects within an area of 28 mm diameter centred on the reference point of the ocular that could impair vision, e.g. bubbles, scratches, inclusions, dull spots, pitting, mould marks, notches, reinforced points, specks, beads, water specks, pock

10、ing, gas inclusions, splintering, cracks, polishing defects or undulations. Single defects outside this area and within 5 mm of frame edges are permissible.2.5 Low Impact Resistance (Drop Ball)Sample IDLocationPassFail1Right ocular on 32mm from the centre-line of the frame2Right frame above the lens

11、,within 20 mm of the mid-line3Right at 90 ° the line through the front of both eyes4Left ocular on 32mm from the centre-line of the frame5Left frame above the lens,within 20 mm of the mid-line6Left at 90 ° the line through the front of both eyes2.6 Medium Impact Resistance(6.35mm Ballistic

12、, Velocity of 40+15,0m/s);2.7 High Impact Resistance(6.35mm Ballistic, Velocity of 110+3,0m/s);2.8 Extra High Impact Resistance(6.35mm Ballistic, Velocity of 175+4,0m/s)Sample ID Location Velocity(ft/sec) Pass Fail 1 Right ocular on 32mm from the centre-line of the frame2 Right frame above the lens,

13、within 20 mm of the mid-line3 Right at 90 ° the line through the front of both eyes4 Left ocular on 32mm from the centre-line of the frame5 Left frame above the lens,within 20 mm of the mid-line6 Left at 90 ° the line through the front of both eyesNote: Note:1m/s=0.3048 ft/s.2.9 Penetratio

14、n ResistanceSample ID LocationPass Fail 1 Right ocular on 32mm from the centre-line of the frame2 Left ocular on 32mm from the centre-line of the frame3 Right ocular on 32mm from the centre-line of the frame4 Left ocular on 32mm from the centre-line of the frame2.10 Resistance to IgnitionSample IDCo

15、mponentPassFail1Frame2Temple3LensSpecificationNo part of the ocular ignite or continue to glow after removal of the steel rod.3.2.10 Thermal Stability(Drop Ball)Sample ID LocationPass Fail 1 Right ocular on 32mm from the centre-line of the frame2 Right frame above the lens,within 20 mm of the mid-li

16、ne3 Right at 90 ° the line through the front of both eyes4 Left ocular on 32mm from the centre-line of the frame5 Left frame above the lens,within 20 mm of the mid-line6 Left at 90 ° the line through the front of both eyes3.2.9Thermal Stability(Ballistic) Sample ID LocationVelocity(ft/sec)

17、 Pass Fail 1 Right ocular on 32mm from the centre-line of the frame2 Right frame above the lens,within 20 mm of the mid-line3 Right at 90 ° the line through the front of both eyes4 Left ocular on 32mm from the centre-line of the frame5 Left frame above the lens,within 20 mm of the mid-line6 Lef

18、t at 90 ° the line through the front of both eyes3.2.9 Thermal Stability(Penetration)Sample ID LocationPass Fail 1 Right ocular on 32mm from the centre-line of the frame2 Left ocular on 32mm from the centre-line of the frame3 Rightocular on 32mm from the centre-line of the frame4 Left ocular on 32mm from the centre-line of the frame3.2.9 Thermal Stability(Optical Transmittance)Sample IDVisible Spectr

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论