塑料制品质量问题英文描述

1、Surface Appearance 外观 G0Surface Appearance 外观 Glossiness/gloss finish 光洁度 Matt finish/matt surface 毛面Glass fiber rich surface/glass emergence on the surface 玻纤外露Blooming/surface blooming外表析出White patches on surface外表白斑Silver marks/silver streak 银纹Splay mark水纹Flow mark 流纹 Weld line 溶结纹 Brittle/brittl

2、eness 脆 Bubbles/trapped gas 气泡Void孔Burn marks 烧伤 FR failed 阻燃不合格 Flame rating V-2 阻燃 V-2 Poor dispersion 分散不好FR/PTFE agglomerates etc阻燃剂/PTFE结块Pellet porous粒子不密 /蜜蜂窝Low impact/tensile etc 物理性能低High flow/filler content etc 流动性/填充过高 Longs/fines/doubles 长粒/碎屑/连粒Poor cut 粒形不好Bristle/voids 外表有小气泡 /孔 Glas

3、s bundles 玻纤结团Product was rejected due to 产品不能承受因为 High moisture level 高水分Warpage/warped 翘曲Shrinkage/shrink 收缩Sink marks 缩影Short shot/short molding 打不满Distortion 变形 Over dimension 尺寸过大Under dimension 尺寸过小Flashing 飞边 Discoloration 变色Off color 颜色差异 Flow r0Off color 颜色差异 Flow rate 流动率Viscous 粘 High flo

4、w高流动Low flow 低流动 Sticky 粘Mold release 脱模 Antioxidant 抗氧剂Flame retardant agent 阻燃剂Heat stabilizer 热稳定剂 Chopped glass fiber 短切玻纤Roving glass fiber 粗纱 /长玻纤Glass beads 玻璃微珠 Milled fiber 碾磨纤Molybdenum disulfide/moly/MoS2 二硫化钼Colorant 着色剂 Pigment 颜料Dye 染料 Accepted product specification 承受产品规格Approved our

5、product 认可我们的产品Re-set spec 重新定标准Add in extra 添加多一点Reduced content 减少 含量Dropped/reduced by x% 减少 含量 %Confirmed color standard 确认颜色标准Approved color standard 认可颜色标准Re-c on firmed color sta ndard重新确认颜色标准Qualified our product认可我们的产品Un derg oing heat agi ng test在做热老化实验Product is un der test ing产品在测试当中Rece

6、ived first order接了第一个定单Expected to finish by 预计在完成Expected order is xMT预计定单量吨Estimated ann ual/m on thly con sumpti on 预计年/月用量外向型塑料制品企业常用的英语词汇一来源：中国塑料产业链网我要评论：0 时间：2021-7-6一、组织机构及职位XX 电子 XX Electronics CO., Ltd 总经理办公室 General manager' s office 企管咅B Enterprise management department (EM) 行政咅 B Adm

7、 ini stratio n departme nt (AD) 销售部 Sales department (SD) TodayHot 财务部 Financial department (FD) 技术部 Techno logy departme nt (TD) 物控部 Production material control department (PMC) 生产部 Production department(PD) 模具咅B Mold manufacturing department, Tooling manufacturing department (TM) 品管咅B Quality Assu

8、ranee department (QA) 冲压车间 Stamp workshop, press workshop 注塑车间 injection workshop 装配车间 Assembly workshop 模具装配车间 Mold and die Assembly workshop 金属加工车间 metal mach ine workshop HotTag 电脉冲车间 Electric discharge process workshop 线切割车间 wire cutting process workshop 工磨车间 Grinding workshop总经理 General manager

9、 (GM) 副总经理 Vice-general manager 经理 manager董事长preside nt副董事长 Vice-preside ntXX 部门经理 Manager of XX department 主任、主管 supervisor拉长 Line leader组长 Foreman, forelady秘书 secretary文员clerk操作员operator助理 assistant二、产品连接器connector端子 terminal条型连接器bar connector阴连接器Housing阳连接器wafer 线束 wire harness 间距 space TodayHot

10、额定电压 rated voltage 额定电流 rated curre nt 接触电阻 contact resista nee 绝缘电阻 in sulati on resista nee 超声波焊接 ultrasonic welding 耐压 withstand voltage 针pin 物料编号part number 导线wire 基体金属 Base metal 电缆夹 cable clamp 倒角 chamfer 接触面积con tact area 接触件安装孔 con tact cavity HotTag 接触长度 con tact len gth 接触件电镀层con tact plat

11、 ing 接触压力 contact pressure 接触件中心距 con tact space 接触簧片 con tact spri ng 插孑L socket contact 法兰、凸缘 Flange 界面间隙 in terfacial gap键Key 键槽keyway 过渡段ramp 屏蔽套shielding 定位基准 Datum reference 扁平电缆 flat cable , Ribbon cable 柔性印刷电线 Flexible printed wiri ng 多层印制电路 Multilayer printed circuit 焊盘pad 图形 pattern 间距pitc

12、h 负极 Negative pole 正极 positive pole 回流Reflow 原理图 Schematic diagram 单面板 single sided board 双面板 Two-sided board ， Double-sided board 外表安装 surface Mounting 翘曲 warp ， bow 波峰焊 wave soldering 编织层braid 同轴电缆 coaxial cable | 电介质 dielectric电缆中导线的头数en ds夕卜部干扰 external interferenee填充物filler 护套jacket 比重 specific

13、 gravity 电阻的温度系数 Temperature coefficie nt of resista nee 三、模具塑料模具 mould of plastics 注塑模具 injection mould 冲压模具die 模架 mould base定模座板 Top clamping plateTop plateFixed clamp plate 水口推板 stripper plate TodayHot A 板 A plate B 板 B plate支承板 support plate方铁 spacer plate底针板 ejector plate面针板 ejector retainer pl

14、ate回针 Return pin 导柱 Guide pin有托导套 Shoulder Guide bush直导套 Straight Guide bush动模座板 Bottom clamp plateMovi ng clamp plate基准线datum line基准面 datum plan HotTag型芯固定板 core-retainer plate凸模固定板 punch-retainer plate顶针 ejector pin单腔模具 single cavity mould多腔模具 multi-cavity mould多浇口 multi-gating浇口 gate缺料 starvi ng排

15、气 breathing光泽gloss合模力 mould clamping force锁模力 mould locking force挤出 extrusion开裂crack循环时间cycle time老化aging螺杆screw麻点pit嵌件insert活动镶件 movable insert起垩 chalking浇注系统feed system主流道 sprue分流道runner浇口 gate直浇口 direct gate , sprue gate 轮辐浇口 spoke gate , spider gate 点浇口 pin-point gate 测浇口 edge gate潜伏浇口 submarine

16、 gate , tunnel gate 料穴 cold-slug well 浇口套 sprue bush 流道板 runner plate排飞槽vent分型线面parti ng line定模 stationary mould ， Fixed mould上模 upper mould, upper half下模 lower mould,lower half型腔cavity凹模 cavity plate,cavity block动模 movable mould, movable half拼块split 定位销dowel 定位销孔dowel hole 型芯core斜销 an gle pin, fin

17、ger cam 滑块slide 滑块导板 slide guide strip 楔紧块 heel block, wedge lock 拉料杆 sprue puller 定位环 locating ring 冷去卩通 cooling channel 脱模斜度draft 滑动型芯slide core螺纹型芯threaded core热流道模具 hot-runner mould绝热流道模 insulated runner mould熔合纹 weld line flow line 三板式模具 three plate mould脱模 ejection换模腔模具 in tercha ngeable cavit

18、y mould 脱模剂 release age nt注射能力shot capacity注射速率 injection rate注射压力 injection pressure差色剂colorant保压时间holdup time 闭模时间closing time 定型装置 sizing system 阴模 female mould , cavity block 阳模 male mould电加工设备 Electron Discharge Machining 数控加工中心 CNC machi ne cen ter 万能铁床 Universal milling machine 卧式刨床 Horizonta

19、l planer 车床 Engine lathe平面磨床 Surface grinding machine 去磁机 Demagnetization machine 万能摇臂钻床 Universal radial movable driller 立式钻床 Vertical driller 超声波清洗机 Ultras onic cleari ng mach ine四、品管SPC statistic process con trol 品管保证 Quality Assuranee 品管控制 Quality control 来料检验 IQC In comi ng quality control Toda

20、yHot 巡检 IPQC In-process quality control 校对 calibration 动态试验 dynamic test 环境试验 Environmental test 非破坏性试验 non-destructive test 光泽gloss 击穿电压(dielectric) breakdown voltage 拉伸强度 tensile strength 冷热骤变试验 thermal shock test 环境试验炉 Environmental chamber 盐雾实验 salt spray test 绝缘电阻测试验仪In sulat ing resista nee me

21、ter内应力 internal stress 疲劳 fatigue HotTag 蠕变creep 试样 specimen 撕裂强度tear strength 缩痕 shrink mark, sink mark 耐久性 durability | 扌由样sampling 样品数量sample sizeAQL Acceptable Quality level 批量 lot size 扌由样方案sampling plan OC 曲线 operation curve 试验顺序 sequenee of tests 环境温度 ambient temperature 可焊性 solderability 阻燃性

22、 flame resista nee五、生产注塑机 injection machine冲床 Punch machine混料机 blender mixer尼龙nylon黄铜brass青铜 bronze TodayHot紫(纯)铜copper料斗hopper麻点pit酉己料 compounding涂层 coating飞边flash预热 preheating再生料 reworked material 再生塑料 reworked plastics 工艺设计 process design 紧急停顿 emergency stop 延时 time delay六.物控保质期shelf lifeABC 分类法

23、ABC Classification反常需求 Abno rmal Dema nd措施信息 Action Message活动报告标志 Action-report-flag基于活动的本钱核算 Activity-based Costi ng (ABC)实际能力 Actual Capacity实际本钱Actual Costs调整现有库存量 Adjust-o n-ha nd已分配量 Allocation TodayHot替代工序 Alternative Routine装配订单 Assembly Order装配零件表 Assembly Parts List装配 Assembly方案自动重排 Automat

24、ic Rescheduling可到达库存 Available Inventory可用材料 Available Material到达库存 Available Stock 可利用工时Available Work可签约量 Available-to-promise 平均库存 Average Inventory 欠交订单Back Order倒序方案 Back Scheduling倒冲法 Back flush HotTag未完成订单Backlog现有库存余额 Bala nee-on-hand Inventory批号 Batch Number批量生产 Batch Production标杆瞄准 Benchma

25、rking 工时清单 Bill of Labor 提货单 Bill of Lading物料清单 Bill of Material |分库 Branch Warehouse经营规划Bus in ess Pla n采购员Buyer能力管理 Capacity Management能力需求方案 Cap acity Requireme nts Pla nning (CRP)保管费率 Carrying Cost Rate保管费 Carrying Cost单元式制造 Cellular Manufacturing修改批量日期 Cha nge Lot Date修改工序Change Route修改产品构造Chan

26、ge Structure 检查点 Check Point闭环物料需求方案 Closed Loop MRP J通用工序标识 Com mon Route ID计算机集成制造 Computer-i ntegrated Man ufacturi ng (CIM)配置代码 Configuration Code约束管理 / 约束理论 Constraints Management/Theory of Constraints (TOC) 依本钱的材料清单 Costed Bill of Material急需零件Critical Part累计提前期 Cumulative Lead Time现有运转时间 Curre

27、 nt Run Hour现有运转数量 Curre nt Run Qua ntity周期盘点 Cycle Counting调整日期Date Adjust有效日期 Date Available修改日期Date Changed完毕日期Date Closed截止日期Date Due生产日期 Date in Produced 库存调整日期 Date Inven tory Adjust 作废日期 D ate Obsolete 收到日期Date Received 交付日期Date Released 需求日期Date Required 发货日期Date to Pull 空负荷Dead Load需求管理 Dem

28、a nd Man ageme nt 需求Dema nd实际能力 Demonstrated Capacity非独立需求 Depe ndent Dema nd直接增减库存处理法Direct-deduct Inventory Transaction Process ing发料单 Disbursement List派工单 Dispatch List分销资源方案 Distributio n Resource Pla nning (DRP)鼓缓冲绳子 Drum-buffer-rope急送代码Expedite Code加工订单 Fabrication Order补足欠交 Fill Backorder呆滞材料

29、分析 Excess Material An alysis经济订货批量 Econ omic Order Qua ntity (EOQ) 工程变更生效日期 Engin eeri ng Cha nge Effect Date 工程变更生效单 En gi neeri ng Cha nge Effect Work Order 工程停顿日期 En gi neeri ng Stop Date | 例外控制 Exception Control总装提前期 Final Assembly Lead Time 确认的方案订单 Firm Pla nned Order 固定订货批量 F ixed Order Qua nt

30、ity 集中预测 Focus Forecasting 完全跟踪 Full Pegging 通用生产管理原那么Gen erally Accepted Manu facturi ng Practices毛需求 Gross Requirements 在制品库存 In Process Inventory 独立需求 In depe ndent Dema nd 投入 / 产出控制 In put/ Output Control 检验标识Inspection ID 厂际需求 In terpla nt Dema nd 库存周转率 Inventory Carry Rate 仓库库位类型 Inventory Loc

31、atio n Type库存周转次数 Inventory Turnover发送订单Issue Order工程记录 Item Record物料工程Item加工车间Job Shop准时制生产 Just-in-time (JIT)看板Kanban人工工时 Labor Hour最后运输日期 Last Shipme nt Date提前期Lead Time 层 Level负何量 Load Leveling负荷报告Load Report负荷Load仓位代码 Location Code仓位备注 Location Remarks 仓位状况 Location Status 按需订货Lot for Lot批量标识Lo

32、t ID 批量编号Lot Number批量 Lot Size低位码 Low Level Code机器能力 Machine Capacity机器加载 Machine Loading外购或自制决策 Make or Buy Decision 面向订单生产的产品Make-to-order Product面向库存生产的产品Make-to-stock Product制造周期时间 Manu facturi ng Cycle Time制造资源方案 Ma nu facturi ng Resource Pla nning (MRP II)主生产方案 Master Production Schedule (MPS)

33、物料本钱Material Cost物料发送和接收 Material Issues and Receipts物料需求方案 Material Requireme nts Pla nning (MRP)登陆标志 MPS Book Flag MPS多重仓位 Multiple Location净改变式 MRP N et Change MRP 净需求 Net Requirements 新仓位 New Location 新组件New Pare nt 新仓库 New Warehouse 不活动报告 No Action Report 现有库存量On-ha nd Bala nee 未结订单 Open Order

34、订单输入Order Entry 订货点 Order Point订货方针Order Policy订货承诺 Order Promising订货备注Order Remarks双亲Pare nt零件清单Part Bills 零件批次Part Lot零件编号Part Number零件Part反查 Pegging 领料单 Picking List 领料/提货Picking方案订单Planned Order后减库存处理法 Post-deduct Inventory Tran sacti on Process ing前减库存处理法 Pre-deduct Inventory Tran sacti on Proc

35、ess ing发票价格Price In voice采购订单价格 Price Purchase Order 优先方案 Priority Planning产品控制 Product Control产品线 Product ion Line生产规划编制 Production Pla nning产品率 Production Rate产品构造树 Production Tree预计可用库存 Projected Available Bala nee 采购订单跟踪 Purchase Order Tracki ng已分配量 Quantity Allocation仓位数量 Quantity At Location欠交

36、数量 Quantity Backorder完成数量 Quantity Completion需求量 Quan tity Dema nd毛需求量 Quantity Gross进货数量Quantity In排队时间Queue Time队列Queue重牛成式 MRP Regenerated MRP重排假设 Rescheduling Assumption资源需求方案 Resource Requireme nts Planning粗冃能力方案 Rough-cut Capacity Planning工艺路线Routing平女库存量Safety Stock保险期 Safety Time预计入库量 Schedu

37、led Receipt残料率 Scrap Factor发送零件Send Part维修件 Service Parts 发货地址Ship Address 发货单联系人Ship Con tact发货零件Ship Date发货单Ship Order工厂日历Shop Calendar车间作业管理 Shop Floor Control损耗系数 Shrinkage Factor标准产品本钱 Sta ndard Product Cost标准机器设置工时Sta ndard Set Up Hour标准单位运转工时Sta ndard Unit Run Hour标准工资率 Standard Wage Rate 状况代

38、码Status Code 库存控制 Stores Control建议工作单 Suggested Work Order 约束理论 Theory of Constraints (TOC) 时间段 Time Bucket时界 Time Fence 单位本钱Un it Cost采购方案员Ven dor Scheduler采购方案法 Ven dor Scheduli ng工作中心能力 Work Cen ter Cap acity工作中心Work Center在制品 Work in Process工作令跟踪 Work Order Tracking工作令Work Order工作进度安排Work Schedu

39、ling零库存 Zero Inventories经济订货批量=Squat（2*年订货量*平均一次订货准备所发生本钱/每件存货的年储存本钱）美国生产和库存控制协会APICS , American Production & Inventory Control Society七. QS-9000 中的术语APQP Adva need Product Quality Pla nning and Control Pla n，产品质量先期筹划和控制方案PPAP Production Part Approval Process,生产件批准程序FMEA Pote ntial Failure Mode

40、and Effects An alysis,潜在失效模式及后果分析MSA Measure System An alysis,测量系统分析SPC Statistical Process Con trol,统计过程控制审核Audit能力 Capability TodayHot 能力指数 Capability In dices 控制方案 Con trol Pla ns 纠正措施 Corrective Acti on 文件 Documentation作业指导书 Job In struct ion, work in struct ion不合格品 Noncon forma nee不合格 Nonconformity每百万零件不合格数Defective Parts Per Mil