爱立信基站LTE开站流程

1、LTE开站流程一、建立串口连接以及传BP（basic package）包 1.1将串口线接到DUL板的LMT A口，将网线连接到LMT B口 1.2 打开SecureCRT点击标示的按钮进行配置Protocol 选择串口的协议红色笔标出的地方正确配置xon/xoff貌似要勾上 然后点击OK 1.3 格式化C2盘和D盘  (1)连接串口后，reload (进入backup模式) (2)mount_c2使c2盘显示 (3)vols查看磁盘状态(4)formathd/c2，formathd/d，并使用vols再次查看(5)再次reload -(6)配置le0的

2、ip地址ifconfig le0   1.4 传输BP用Total Commander或者FileZilla都可以。将bp包中的c2和d盘复制到基站的c2和d盘中去 传输完成之后，在串口之中输入reload，使板子重启二、 升级2.1 网线接到DUL的LMT B口。使用moshell连接到站上之后设置secmodesecmode -s -> displays status of security settings of RBSsecmode -fu -> makes FTP unsecuresecmode -tu

3、 -> sets telnet and FTP as unsecuresecmode -a u -> enables SFTP2.2 创建一个mo在本机使用CesarFTP来创建ftp的server，假设server的ip为3,FTP的用户名为ftp，密码为ftp，则创建mo过程为：cr SwManagement=1,UpgradePackage=CXP102051%16_R26AZ Attribute 2 of 2, upFilePathOnFtpServer (string): /CXP102051%16_R26AZ/CXP102051%

4、16_R26AZ.xmlFollowing attributes are optional. Enter attribute value or "d" for default.Once the MO is created, these attributes cannot be changed (they are restricted).Attribute 1 of 2, user (string): ftp Attribute 2 of 2, password (string): ftp2.3 升级过程get UpgradePackage=R5xxacl Upgr

5、adePackage=R5xxacc UpgradePackage=R5xx forcedInstallpolu（新开一个窗口）     # To poll and see the UP installation progress2.4 运行升级命令acl UpgradePackage=R5xxacc UpgradePackage=R5xx rebootNodeUpgradepolu（新开一个窗口）     # To poll and see when the Upgrade is finished. T

6、his command is also confirming the Upgrade(AwaitingForConfirm message) 三、 run scriptScript 目录0_Cabinet.mo1_giga.mo2_S1_MME.mo3_TuSyncRef_s6_7.mo4_AddSyncRef_GPS_s6_7.mo5_radio_create.mo6_EnodeBtransport.mo7_System_constand.mo8_PA17.mo9_Feature.mos  3.1 trun 0_Cabinet.mo3.2 trun 1

7、_giga.mo3.3 确认千兆传输口TN B或者TN A已经是enable的状态,做CV3.4 trun 3_TuSyncRef_s6_7.mo3.5 trun 4_AddSyncRef_GPS_s6_7.mo3.6 trun 5_radio_create.mo3.7 trun 6_EnodeBtransport.mo3.8 trun 7_System_constand.mo3.9 trun 8_PA17.mo   然后做CV3.10 load license     license server

8、60; （开filezila）pr licensing=1pr rbscon (查rbsconfiguration 的MO号xxx)acl RbsConfigurationacc RbsConfiguration setUniqueLogicalname      需要输入UniqueLogicalname，这个和license 里面的fingerprint 是一致的license server pr licensing=1acl 6acc 6 updateLicenseKeyFile   &#

9、160;  userid:eric(配合着filezila的设置)      password:eric      ipaddress:ftp server      sfile:/bjDUL20_108_110128_102016.xmlcvms license 3.11 run 9_Feature.mos  Get . featurestate 1 (查看已经activated feature) Get . featurestate 0 (查看