鲁川科技产品介绍

1、欧洲著名刃磨机械品牌欧洲著名刃磨机械品牌MVMMVM中国中国代表处代表处Exclusive agent of MVM brand in Great China AreaExclusive agent of MVM brand in Great China Area成都鲁川科技有限公司MVM集团简介位于意大利的Correggio (RE) 工业园，秉承欧洲先进工业优良传统，专业从事磨刀机生产逾50年，全球范围内销售磨刀机产品。品质上乘，技术精良，产品丰富，服务专业。INTRODUCTION OF MVM GROUPLocated in Correggio(RE) industrial park,

2、 Italy, having been producing knife grinders for straight and circular blades for over 50 years, MVM now is well-known for its perfect quality and advanced technology. To better serve the customers, MVM has set up numerous sales chains all over the world.MVM部分经销商代理商展示MVM Agents (one portion)研磨机 LAPP

3、ING MACHINE直磨床/平刃磨机 GRINDERS FOR STRAIGHT BLADES校正磨床 GRINDING MACHINE圆磨床/圆刃磨机 GRINDERS FOR CIRCULAR BLADES万能磨刀机 UNIVERSAL GRINDING MACHINE带锯锐磨定形磨床 BAND SAW SHARPENNING AND SETTING MACHINE工业矫直机及去毛刺机 SPECIAL TOOLS样板工程案例 SAMPLE CASES专门针对磨削硬质合金刀片而设计的，此磨床有一个夹紧在特殊空场电磁卡盘上的固定机械铝制卡盘；并且第二个磁盘的磁力是常规磁盘磁力的10倍The

4、BM 400/400-R model grinder is designed specifically for profiled hard-metal inserts, as it has a fixed mechanical aluminium chuck onto which our special high power open-field magnetic chuck is affixed. This special magnetic chuck has a magnetic force 10 times stronger than that of a conventional mag

5、netic chuck. 电控盒Control Box特征：自动向下进刀砂轮，预设位置自动停机功能磨头可倾斜可进行凹面磨削机械固定铝制卡盘链式驱动输送滑架带可替换硬化可调薄片滑架导轨Features:Automatic grinding wheel down-feed unit; automatic stop at preset level. Tilting head to grind hollow surfaces; Carriage run guides covered with replaceable hardened steel guides; Chain driven carriag

6、e; Aluminium chuck for mechanical fixing. Chuck/ width 70 mm, length 400 mm.可按需求提供：l机床底座l硬质合金电磁吸盘l金刚石砂轮l橡胶防护罩UPON REQUEST lUnit base;lMagnetic chuck for hard metal inserts;lDiamond wheel;lRubber bellow protection covers. 特征：一次性锐磨4片重叠刨刀片的整组工具带有坚固的底层替换带的滑动导轨半自动进刀装置，0-0.05mm渐增调节进给，BM型号带有预设自动停机功能可调节的冷却液

7、喷嘴FEATURES:Cast iron machine bed; Coolant pump; Chain driven carriage; Manual downfeed grinding head; Tilting head to grind hollow surfaces; Carriage run guides covered with replaceable hardened steel guides; 90 rotating knife-mounting chuck; Supplied with stepped blocks to grind 4 overlapping plane

8、r blades simultaneously可用于研磨：刨床刀具一次性刀片（如Tersa）硬质合金成形刀片（如Widia）The AM series is designed for grinding planer knives and is the most basic grinding machine M.V.M. manufactures.可按要求提供：l基座/支架；机床调平仪、电磁卡盘、滑架变速器l双倍输送速度、带有附加泵的外置水槽UPON REQUESTlBase; Magnetic chuck; Variable carriage speed; lEdge reference ba

9、r; External tank with additional pump; l0 reference chuck; Switch for run adjustment; lClamping tool for leather cutting knives; lMagnetic chuck for hard metal inserts; lClamping device for Tersa, Centrofix, Terminus, Kanefusa, Sinus, Weinig knives. 平面加工旋转组：可选择ZX1000标准加工ZX1230ROTATING PANEL特性:铸铁槽；砂轮

10、手动或自动向下进给功能；自动停止预设功能；摆式头磨凹面；带可替换的硬化可调薄片滑架导轨； 90 旋转刀架座设置；链驱动滑架；装配阶式刀架同时磨削4重叠刀片FEATURE:Cast iron machine bed; Automatic downfeed grinding head with automatic stop at preset height. Tilting head to grind hollow surfaces; Carriage run guides covered with replaceable hardened steel guides; 90 rotating kn

11、ife-mounting chuck; Coolant pump; Chain driven carriage; Supplied with stepped blocks to grind 4 overlapping planer blades simultaneouslyHM刀片卡盘HM KNIFVES CHUCK可按要求提供：基座/支架；机床调平仪电磁卡盘；滑架变速器3-11 m/min；边缘基准尺；带有附加泵的外置水槽；运行调整开关；用于Tersa, Centrofix, Terminus, Kanefusa, Sinus, Weinig等刀具的夹紧装置；用于硬质合金刀片的电磁卡盘UPO

12、N REQUEST:Base; Magnetic chuck; Magnetic chuck for hard metal inserts.Variable carriage speed 2-11 m/min; Edge reference bar;External tank with additional pump; Grinding motor 2,2 kW (3 HP); Switch run adjustment;Camping device for Tersa, Centrofix, Terminus, Kanefusa, Sinus, Weinig knives;特征：一次性磨削4

13、个重叠刀片的分段带锁紧夹具带有坚固的底层替换带的滑动导轨半自动进刀装置，0.001-0.4mm渐增调节进给，带有预设自动停机功能可倾斜100度卡盘：通过钢尺读取度数摆式头磨凹面配有冷却泵的外置水槽FEATURE:Mini-PLC controlling automatic downfeed, spark-out and downfeed right or left and rightHeavy duty grinding motor 2,2 k W (3 HP) - 2800 RPM; Tilting head to grind hollow surfaces; 90 rotating kni

14、fe-mounting chuck; Carriage run guides covered with replaceable hardened steel guides; Supplied with stepped blocks to grind 4 overlapping planer blades simultaneously; Variable carriage speed 2-18 m/min; External tank with coolant pump; Switch for carriage run adjustment. 磁盘净水器磁盘净水器Water cleaner wi

15、th Water cleaner with magnetic disksmagnetic disksPLC PLC 数控单元数控单元PLC ControllerPLC Controller可按要求供应:电磁卡盘；磁盘净水器滑架变速器2-18m/min；扇形支架 150mm；带有防护罩的滑架导轨；边缘基准尺；用于硬质合金刀片的电磁卡盘用于Tersa, Centrofix, Terminus, Kanefusa, Sinus, Weinig刀片的夹紧装置；UPON REQUEST：Magnetic chuck (standard on PX 1350); Segment holder 150 mm

16、; Edge reference bar; Carriage guides covered with protective rubber bellows; Magnetic chuck for hard metal inserts; Clamping device for Tersa, Centrofix, Terminus, Kanefusa, Sinus, Weinig knives; Magnetic coolant cleaner with rotating discs. 倾斜工作台装置Inclination EquipmentPLC程序操控盘PLC Program controlle

17、r特性：一个磨头，无振动无噪音；砂轮快速更换卡哨齿带滑架驱动；标准电磁工作台工作台上有高容量分配冷却液砂轮自动循环工作自动空转可为特殊刀片定制专用设备自动向下进给和无火花磨削循环作业FEATURE:Mini-PLC controlling automatic downfeed, automatic working cycle, spark-out and downfeed right or left and rightExtremely quiet and vibration-free grinding head; Carriage drive via toothed belt for a f

18、luid translation; High flow of coolant onto work piece; Magnetic chuck; Variable carriage speed; Switch for carriage run adjustment带转盘磁性净水器Water cleaner with magnetic disks可按要求提供：可按要求提供：l薄极性电磁卡盘 12-14; 砂轮修整工具; 水平检测器l磁盘清洁器; 纸过滤清洁器l分度定位环直径150/178; 电磁卡盘角度刻度仪UPON REQUESTUPON REQUEST：Thin polarity magnet

19、ic chuck 12/14 mm; Grinding motor 5,2 kW (7 HP) with segments holding ring 178 mm; Grinding wheel dresser; Slow carriage speed 0,3 mt/min; Magnetic coolant cleaner with rotating discs; Coolant cleaner with paper filter manual or automatic; Edge reference bar; Angular divisor for magnetic chuck +/-90

20、; 特征：磨削精度0.0001滑动托架装置；磨头无振动无噪音；齿带带动滑架平稳滑动通过3个喷嘴高效率冷却，其中一个在砂轮中心部位配有自动轮向下进给和无火花磨削的循环作业可以设计并提供装夹特殊刀片的装置FEATURE:。grinding accuracy：0.0001Rotating magnetic chuck from 0 to 90 (Polarity 20 mm); Variable carriage speed from 1 to 30 m/min with carriage run adjustmentAutomatic grinding wheel downfeed and ful

21、ly programmable working cycle by a digital programmer;Programmable work cycles: roughing, finishing, spark-out; Longitudinal grinding head angle adjustment from 0 to 3; Grinding wheel quick up and down approach, and slow down approach; Separate coolant collection tank fitted with 80 l/min. motor pum

22、p; 磁性净水器Water cleaner with magnetic disksPLC标准程序控制器PLC digital programmer 分度定位环 250mmSegment holding ring 250可按要求提供：磨头快速链接；用于使磁性卡盘转动90的装置;砂轮磨损补偿，自动润滑，抽吸系统; 磁盘净水器，纸过滤净水器；用于刮片的机械夹紧装置UPON REQUEST:Thin polarity magnetic chuck 12/14 mm; Quick change of the grinding wheel; Angular divisor for magnetic chu

23、ck +/- 90; RTS Level detector wheel wear compensation system; Magnetic coolant cleaner with rotating discs; Additional super-finishing grinding head; Additional grinding head 3,7 kW (5 HP) with automatic or manual downfeed function; 注：磨削长度可根据客户需求进行订制，最大磨削长度可达21000mm，磨削精度可达0.0001mm。 PLC标准程序控制器PLC dig

24、ital programmer 特征：滑动托架装置磨头无振动无噪音齿带带动滑架平稳滑动通过3个喷嘴高效率冷却，其中一个在砂轮中心部位配有自动轮向下进给和无火花磨削的循环作业可以设计并提供装夹特殊刀片的装置FEATURE:Rotating magnetic chuck from -90 to +90 (Polarity 20 mm); Angular divisor for magnetic chuck; Segment holding ring 250; Automatic grinding wheel downfeed and fully programmable working cycle

25、 by means of a digital programmer (PLC); Longitudinal grinding head angle adjustment from 0 to 3; Separate coolant collection tank fitted with 80 l/min. motor pump; 辅助磨头Additional grinding head磁性净水器Water cleaner with magnetic disksUPON REQUESTThin polarity magnetic chuck 12/14 mm; Quick change of th

26、e grinding wheel; Variable grinding wheel speedSlow carriage speed 0,3 mt/min; RTS Level detector wheel wear compensation system; Automatic lubrication; Magnetic coolant cleaner with rotating discs;Coolant cleaner with paper filter manual or automatic; Additional super-finishing grinding head; Addit

27、ional grinding head 3,7 kW (5 HP) automatic or manual downfeed; Extraction system. 可按要求提供：磨头快速链接，辅助磨头,自动润滑，进入系统；磁性卡盘（极性mm200）夹紧装置或刮片，PLC控制电磁吸盘旋转， 砂轮磨损补偿，自动润滑；磁盘净水器，纸过滤净水器注：磨削长度可根据客户需求进行订制，最大磨削长度可达21000mm，磨削精度可达0.0001mm。辅助磨头TX150HP Additional grinding head TX150HPPLC标准程序控制PLC digital programmer 特性：磨头

28、无振动无噪音;齿带滑架确保平滑移动无球轴承在Turcite滑道上输送冲程部件高冷却流量处理通过3个喷嘴，其中一个在中心，一个在砂轮轴上自动砂轮循环向下进给，自动熄火可为特殊刀片定制专用设备FEATURE:Rotating magnetic chuck from -90 to+90 (width 150 mm); Angular divisor for magnetic chuck;Segment holding ring 200 mm; Variable carriage speed from 1 to 30 m/min with carriage run adjustment control

29、led electronically by PLC; Automatic grinding wheel downfeed and fully programmable working cycle by means of a digital programmer (PLC); Grinding wheel quick up and down approach, and slow down approach; Transversal head translation for a perfect aligning of the grinding wheels in relation to the w

30、ork piece; Separate coolant collection tank fitted with 140 l/min. motor pump齿轮箱配置倾斜工作台装置Inclination Equipment可按要求提供：可按要求提供：高压黄铜薄极性磁性卡盘，砂轮整修器，水平检测仪，附加磨头，磁盘清洁器，纸过滤器，PLC编程，分度定位环。FEATURE:FEATURE:Magnetic chuck 200 - 250 - 300 mm width; Segment holding ring diam. 250 / 300 / 350 mm; Variable grinding wh

31、eel speed; Slow carriage speed 0,3 m/min; RTS Level detector wheel wear compensation system; Automatic lubrication; Magnetic coolant cleaner with rotating discs; Additional super-finishing grinding head; 注：磨削长度可根据客户需求进行订制，最大磨削长度可达21000mm，磨削精度可达0.0001mm。特征： 最大磨削直径：530mm 磨削精度：0.001mm旋转摆头，正反方向旋转的砂轮电机可精

32、确的磨削各种角度带有调速器的旋转卡盘链驱动旋转卡盘磨圆刃刀片时，磨头摆动角度范围从0到90，可使用游标尺读数砂轮自动向下进给设置，从0.001mm开始调整进给，并且设有自动停止预设功能可磨圆刀和底刀（需提供图纸）密闭防护罩Protection Cover电磁卡盘Magnetic Chuck带法兰和对接法兰的电磁卡盘Magnetic ChuckWith flange and plain flangeFEATURES： Max. work-piece diameter 530mm Grinding accuracy 0.001mmAutomatic downfeed grinding head w

33、ith automatic stop at preset height; Rotating head range 0-90, tilting 0-5 for grinding circular blades, using an easy to read venier scale; Grinding wheel motor with clockwise and anti-clockwise rotation direction for perfect grinding of any angle; Fixed speed rotating mechanical chuck for level gr

34、inding operations; Chain driven rotating chuck可按需求提供：标准直径300mm电磁卡盘或极性厚卡盘； 可变速卡盘3-45转数/分； 分段定位环/调整环直径为150mm； 循环火花调整；手动或自动滤纸净水器和外挂箱；电磁盘净水器和外挂箱；抽吸系统（加压封闭舱） 运转立柱310mm卤素灯UPON REQUESTGrinding motor 3.6 kW (5 HP); Magnetic chuck 300 standard or thin polarity; Variable rotating chuck speed 3 - 35 RPM; Segme

35、nts holding ring 150 mm; Spark out adjustment cycle; Coolant cleaner with paper filter manual or automatic; Magnetic coolant cleaner with rotating discs; Extraction system; Protection cabinVertical column 310 mm; Halogen lamp.UX420 型号万能磨床可锐磨镗孔刀、丝锥、滚齿刀、异形刀头和异形刀片、用于车床加工断屑槽硬质合金工具和所有类型和异形的硬质合金刀具。通过添加适当的

36、配件-其性能可以达到锐磨小的平刃刀片和圆刃刀片要求。磨头围绕垂直轴可360 旋转，并且砂轮有一个+ / - 30 的倾斜范围The UX 420 universal grinder (with working table length of 420 mm) can sharpen borers, taps, hobs, and shaped bits, as well as grinding shaped blades, and creating chip-breaker grooves in hard-alloy tools for lathes and steel/hard-metal c

37、utters of all types and shapes. Furthermore, by adding various accessories the UX 420 can be use to grind small straight blades and circular blades. An extremely stable and accurate, all-cast iron machine. The grinder head rotates about its vertical axis a full 360 and the grinding wheel has a +/- 3

38、0 tilt range.可按需求提供：整流铸铁的机床调平仪和工作台CM4多功能分度仪；CM4电机分度仪；CM4铣削支架分度盘 固定尾架，滑动尾架，护轮板砂轮主轴轴衬；中心轨距/轮距金刚石支架带有外挂水槽的抽吸系统UPON REQUEST:Base and tables in rectified cast iron; Universal divisor CM4; Motorised divisor CM4; Work-piece holder CM4; Disks for divisor; Fixed tailstock; Sliding boat tailstock; Wheel guard

39、; Wheel spindle bushes; Center gauge; Diamond holder;特征：全铸铁磁头罩带锯进给无振动带锯进给速度可调砂轮转速可调金刚石砂轮油浴齿轮传动高敏感度调节保证磨削精确齿片专用异形砂轮Special wheel for band sawFEATURES: Robust cast-iron main machine housing; All gears housed in an oil bath (10 kg). Vibration-free band saw movement; Sensitive controls for high precisio

40、n adjustment; Speed regulator; Cooling system; CBN grinding wheel.自动冷却系统Automatic cooling systemPLC 操制盒PLC Control panel液压刀片矫直机用来设计和制造带或者不带韦地亚面刀刃的直钢刀片、剪切刀片或铡刀片以及造纸业中应用的的通用刀片。The hydraulic RDM blade straightening machine is designed and manufactured to straighten steel blades with or without a tungsten carbide cutting-edge, shearing or guillotine