船舶结构名称简易

1、Ships hull The main body of a ship is called the hull. This is the area between the main deck, the sides and the bottom. It is made up of frames covered with plating. The foremost part is called the bow and the rearmost part is called stern.terms relating to ships hull after end or stern: moving ast

2、ern: bow: moving ahead: fore and aft amidship beam terms relating to ships hull bulkhead: are vertical steel walls going across the ship and along. deck: divide the hull horizontally. tweendecks: those dividing up cargo spaces are known as tweendecks. hold: the cargo space in dry cargo ships. tank:

3、the cargo space in liquid cargo ships. fore peak tank: the after end of the hull. after peak tank: the fore end of the hull. double bottom tanks: the space between the holds and the bottom of the hull.Ships superstructurevessels structure vessels structure 1 1. This is the poop. There are fairleads,

4、 capstan and bollards on it. vessels structure 2 This is the funnel. Its a casing used for exhaust pipes from the engines. vessels structure 33. The satellite communications antenna, which has an automatic tracking system, is housed in a plastic dome for weather protection. vessels structure 44 The

5、mast carries antennas, whistles, navigational lights and the signal flags. vessels structure 55. This is the bridge. We can see radar, steering wheel, compasses etc. on the bridge. vessels structure 6 This is the engine control room. From this centre all the main engines, auxiliary engines and elect

6、rical motors are operated and controlled. The main electrical switch board is also here. vessels structure 7 This is the galley, where delicious food is cooked. vessels structure 8This is the cabin where the sailors live.vessels structure 9This is the messroom, where the crew eat their meals. vessel

7、s structure 10this is the deck crane vessels structure 11 The forecastle is the deck area that is at the very front of the ship. Here youll find all the equipment for mooring and anchoring. As indicated in the picture, 1 is capstan. 2 is bitts or bollards. 3 is the windlass. 4 is the ladder. 5 is th

8、e Panama lead. 6 is Jackstaff.vessels structure 12 This is the anchor, which is used to moor the ship to the seabed to keep it stationary.vessels structure 13 The bulbous bow is a round-shaped underwater part in the front of the ship. The purpose is to create less friction with water so that the shi

9、p moves more easily.vessels structure 14The bow thruster is placed in the front of the ship under the water. The bow thruster eases berthing or manoeuvering sideways at slow speed. vessels structure 15The rudder(s) and propeller(s) are situated under the stern of the ship. The rudder is used to steer the ship. The propeller drives the