发布用服ha30-imos110b3323开局指导书

1、目录 TOC o 1-3 h z u HYPERLINK l _Toc480492096 1 概述 图3-5所示的对话框提示输入root用户的密码，然后再点击，就可以登录服务器。图2-5 Enter Password对话框安装双机前的环境配置配置之前，请使用df查看确认安装系统时给DRBD使用的磁盘分区挂载点，并且记录下来，后面配置需要使用。比如我们服务器出厂时给DRBD同步使用的磁盘分区是/dev/sda2。实际安装时请根据操作系统安装情况进行设置。rootlocalhost # dfFilesystem 1K-blocks Used Available Use% Mounted on/de

2、v/sda6 354454532 16253948 320195288 5% /tmpfs 1967992 4 1967988 1% /dev/shm/dev/sda1 198337 30330 157767 17% /boot/dev/sda2 503964904 202740 478162164 1% /mnt/syncdata/dev/sda3 100791728 229804 95441924 1% /var/log/imoslogDRBD使用的分区处理使用服务器默认的分区为DRBD分区两台服务器中都需要修改/etc/fstab ，将用于DRBD同步的分区-/mnt/syncdata前

3、用#注掉。实际安装时请根据操作系统安装时分区划分情况进行设置。rootlocalhost # vi /etc/fstab# /etc/fstab# Created by anaconda on Wed Mar 27 10:32:32 2013# Accessible filesystems, by reference, are maintained under /dev/disk# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info#UUID=29cf6d2d-3578-41a0-8055-8ce4

4、55b4c37f / ext3 defaults 1 1UUID=1849a3b6-1381-46ce-be94-dc300ad92a5c /boot ext3 defaults 1 2#UUID=6378d6d5-a882-41ca-989f-82a4a4b81e13 /mnt/syncdata ext3 defaults 1 2UUID=c2557872-eb1c-4703-8c8b-8b0456d340d0 /var/log/imoslog ext3 defaults 1 2UUID=7e239c16-8bd7-419b-99ae-4c680c8dc058 swap swap defau

5、lts 0 0tmpfs /dev/shm tmpfs defaults 0 0devpts /dev/pts devpts gid=5,mode=620 0 0sysfs /sys sysfs defaults 0 0proc /proc proc defaults 0 0将两台服务器/etc/fstab 中/mnt/syndata 使用“#”注解掉，随后全部reboot重启服务器使得设置生效。设置系统时间请设置好主服务器系统时间（根据实际时间设定）date -s 2017-03-27 12:00:00加载配置文件1.该操作会修改主机名，配置完成后，请不要更改服务器主机名。否则后续服务将无法

6、正常使用。2.若需要安装多个交付件，例如VM+IS，则需要把交付件的安装包一起放到/home/ha_easy_install/ imos_version路径下，再执行./loadcfg.sh操作进入/home/ha_easy_install目录：cd /home/ha_easy_install执行./loadcfg.sh 根据提示分别输入主备机的hostname、业务IP、ssh登录密码、心跳地址rootvm1 ha_easy_install# ./loadcfg.sh 2017-03-27 19:03:00 : Before installing ha softerware,Please i

7、nput necessary infomation.Nodes information collecting .Please input node1 hostname:default ha_1vm1 #主机hostname Please confirm node1 hostname: vm1Please input node1 ipaddr:such as 0 #主机业务IPPlease confirm node1 ipaddr: 0Please input node1 loginpasswd:such as passwdpasswdPlease confirm node1 loginpass

8、wd: passwdPlease input node1 HeartBeat ServerIP :such as 10Please confirm node1 heartbeat ipaddr:0Please input node2 hostname:default ha_2vm2Please confirm node2 hostname: vm2Please input node2 ipaddr:such as 1Please confirm node2 ipaddr: 1Please input node2 loginpasswd:such as passwdpasswdPlease co

9、nfirm node2 loginpasswd: passwdPlease input node2 HeartBeat ServerIP :such as 21Please confirm node2 heartbeat ipaddr:1Install local pdsh&expect.Install local pdsh&expect finished.2017-03-27 19:04:39 Set ssh mutual trust .2017-03-27 19:04:42 Set ssh mutual trust finished.Please input TMS ServerIP:su

10、ch as 2放入IS安装包才有这一步操作6 #使用虚地址Please input VM ServerIP:such as 192,168.0.126 #使用虚地址Please input Database IP:such as 192,168.0.126 #使用虚地址Please input Multicast:default: 0一般使用默认值，直接敲回车Please confirm csmip:0Please input first avaiable Multicast Port:default: 2061一般使用默认值，直接敲回车Please confirm csmport1:2061

11、Please input second avaiable Multicast Port:default: 2062一般使用默认值，直接敲回车Please confirm csmport2:2062Please input Virtual ServerIP:such as 06 #虚地址Please input an reachable gateway address:such as 54 #网关Here is the list of avaiable partition:/dev/sda2 1171.88G #分区列表/dev/sda3 195.312G Please choose an av

12、aiable partition for node1 share partition:such as sda2sda3 Here is the list of avaiable partition:/dev/sda2 200G #分区列表Please choose an avaiable partition for node2 share partition:such as sda2sda2Please choose the share partition size,it must be an integer:defalut:100G100G #默认值为100G，最大分配空间比该分区小10G

13、Set parameters into cfgfile.Set parameters into cfgfile finished.Set systems network file.Set systems network file finished.Set systems hostname.Set systems hostname finished.To make sure both server system time synchronization ,Please wait.Mon Mar 27 19:31:22 CST 20171: Mon Mar 27 19:31:22 CST 2017

14、Set server system time synchronization finished.Cfgfile information is setted already,it needs reboot to work,reboot right now ?yes/no:default:yes#默认敲回车主备机会重启，使配置生效安装双机软件双机软件安装进入/home/ha_easy_install目录：cd /home/ha_easy_install安装基础双机软件：rootvm1 ha_easy_install# ./bphainstall.shimos_process_code.conf 1

15、00% 47 0.1KB/s 00:00 imos_process_code.conf 100% 47 0.1KB/s 00:00 ha_strong_stop.sh 100% 9320 9.1KB/s 00:00 ha_strong_stop.sh 100% 9320 9.1KB/s 00:00 Install Management peer server software succeeded!Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFail

16、ures: 0imosha_x86_64/imosha_x86_64/hasys.confimosha_x86_64/hauninstall.shimosha_x86_64/imos_ha-1.x86_64.rpmimosha_x86_64/comminstall.binimosha_x86_64/initfile.tar.gzimosha_x86_64/hainstall.shspawn ./hainstall.sh2017-03-27 19:42:48 : Do not close the terminal during the installation; otherwise, unkno

17、wn error might occur.Begin to install .Begin to install common server .This will take some time,please wait a moment.Begin to install imos_ha server .corosyncPreparing. # 100%begin install. 1:imos_ha # 100%end install.Stopping crond: OK Starting crond: OK Install imos_ha servers succeeded!imos_ha in

18、stall succ!1: imosha_x86_64/1: imosha_x86_64/hasys.conf1: imosha_x86_64/hauninstall.sh1: imosha_x86_64/imos_ha-1.x86_64.rpm1: imosha_x86_64/comminstall.bin1: imosha_x86_64/initfile.tar.gz1: imosha_x86_64/hainstall.sh1: spawn ./hainstall.sh1: 2017-03-27 19:43:50 : Do not close the terminal during the

19、 installation; otherwise, unknown error might occur.1: Begin to install .1: Begin to install common server .This will take some time,please wait a moment.1: Begin to install imos_ha server .1: corosync1: Preparing. # 100%1: begin install.1: 1:imos_ha # 100%1: end install.1: Stopping crond: OK 1: Sta

20、rting crond: OK 1: Install imos_ha servers succeeded!1: imos_ha install succ!Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 64 sec, Min: 64 sec, Max: 64 secFailures: 0*Initializing the system environment for both.*1: Stopping NetworkManager daemon: FAILED0: Stopping NetworkManage

21、r daemon: FAILEDConnect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 1 sec, Min: 1 sec, Max: 1 secFailures: 0Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 0Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 s

22、ec, Min: 0 sec, Max: 0 secFailures: 01: iptables: Flushing firewall rules: OK 1: iptables: Setting chains to policy ACCEPT: filter OK 0: iptables: Flushing firewall rules: OK 0: iptables: Setting chains to policy ACCEPT: filter OK 1: iptables: Unloading modules: OK 0: iptables: Unloading modules: OK

23、 Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 0Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 1 sec, Min: 1 sec, Max: 1 secFailures: 0Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec,

24、 Max: 0 secFailures: 0Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 01: rpm: no packages given for erasepdshvm1: 1: ssh exited with exit code 10: rpm: no packages given for erasepdshvm1: 0: ssh exited with exit code 1Connect time: Avg: 0 se

25、c, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 0Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 1 sec, Min: 1 sec, Max: 1 secFailures: 0*Initialized the system environment complete.*hosts 100% 117 0.1KB/s 00:00 network.slave 100% 68 0.1KB/s 00:0

26、0 corosync.conf.slave 100% 1025 1.0KB/s 00:00 drbd.conf 100% 811 0.8KB/s 00:00 Writing physical volume data to disk /dev/sda3 Physical volume /dev/sda3 successfully created Volume group share successfully created Logical volume data1 created1: Writing physical volume data to disk /dev/sda21: Physica

27、l volume /dev/sda2 successfully createdConnect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 01: Volume group share successfully createdConnect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 01: Lo

28、gical volume data1 createdConnect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec, Max: 0 secFailures: 0Initialzing the shared space start! The time it takes depends on the size of the shared space.it will take half an hour for ecah 50G.Please be patient.#初始化dd分区，耗时较久，50

29、G大约需要半小时0: dd: writing to /dev/share/data1: No space left on device0: 20971521+0 records in0: 20971520+0 records out0: 10737418240 bytes (11 GB) copied, 211.015 s, 50.9 MB/spdshvm1: 0: ssh exited with exit code 11: dd: writing to /dev/share/data1: No space left on device1: 20971521+0 records in1: 20

30、971520+0 records out1: 10737418240 bytes (11 GB) copied, 223.649 s, 48.0 MB/spdshvm1: 1: ssh exited with exit code 1Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 218 sec, Min: 212 sec, Max: 224 secFailures: 0The shared spece initialized complete!0: NOT initializing bitmap1: NOT

31、initializing bitmap0: Writing meta data.0: initializing activity log0: New drbd meta data block successfully created.1: Writing meta data.1: initializing activity log1: New drbd meta data block successfully created.Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 0 sec, Min: 0 sec,

32、 Max: 0 secFailures: 00: Starting DRBD resources: 0: create res: postgres0: prepare disk: postgres1: Starting DRBD resources: 1: create res: postgres1: prepare disk: postgres0: adjust disk: postgres0: adjust net: postgres0: 0: WARN: stdin/stdout is not a TTY; using /dev/consoleoutdated-wfc-timeout h

33、as to be shorter than degr-wfc-timeout0: outdated-wfc-timeout implicitly set to degr-wfc-timeout (120s)1: adjust disk: postgres1: adjust net: postgres1: 1: WARN: stdin/stdout is not a TTY; using /dev/consoleoutdated-wfc-timeout has to be shorter than degr-wfc-timeout1: outdated-wfc-timeout implicitl

34、y set to degr-wfc-timeout (120s)0: .1: .Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 1 sec, Min: 1 sec, Max: 1 secFailures: 0drbd driver loaded OK; device status: version: 8.4.1 (api:1/proto:86-100) GIT-hash: 91b4c048c1a0e06777b5f65d312b38d47abaea80 build by philBuild64R6, 2012

35、-04-17 11:28:08 m:res cs ro ds p mounted fstype 0:postgres SyncSource Primary/Secondary UpToDate/Inconsistent C . synced: 4.5% (9788/10236)Mdrbd driver loaded OK; device status: version: 8.4.1 (api:1/proto:86-100) GIT-hash: 91b4c048c1a0e06777b5f65d312b38d47abaea80 build by philBuild64R6, 2012-04-17

36、11:28:08 m:res cs ro ds p mounted fstype 0:postgres SyncSource Primary/Secondary UpToDate/Inconsistent C . synced: 9.2% (9304/10236)M.#中间过程百分比一直在增加drbd driver loaded OK; device status: version: 8.4.1 (api:1/proto:86-100) GIT-hash: 91b4c048c1a0e06777b5f65d312b38d47abaea80 build by philBuild64R6, 2012

37、-04-17 11:28:08 m:res cs ro ds p mounted fstype 0:postgres SyncSource Primary/Secondary UpToDate/Inconsistent C . synced: 91.1% (920/10236)Mdrbd driver loaded OK; device status: version: 8.4.1 (api:1/proto:86-100) GIT-hash: 91b4c048c1a0e06777b5f65d312b38d47abaea80 build by philBuild64R6, 2012-04-17

38、11:28:08 m:res cs ro ds p mounted fstype 0:postgres SyncSource Primary/Secondary UpToDate/Inconsistent C . synced: 95.9% (424/10236)Mdrbd driver loaded OK; device status: version: 8.4.1 (api:1/proto:86-100) GIT-hash: 91b4c048c1a0e06777b5f65d312b38d47abaea80 build by philBuild64R6, 2012-04-17 11:28:0

39、8 m:res cs ro ds p mounted fstype 0:postgres Connected Primary/Secondary UpToDate/UpToDate Cmke2fs 1.41.12 (17-May-2010)Filesystem label=OS type: LinuxBlock size=4096 (log=2)Fragment size=4096 (log=2)Stride=0 blocks, Stripe width=0 blocks655360 inodes, 2621351 blocks131067 blocks (5.00%) reserved fo

40、r the super userFirst data block=0Maximum filesystem blocks=268435456080 block groups32768 blocks per group, 32768 fragments per group8192 inodes per groupSuperblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632Writing inode tables: done Creating journal (32

41、768 blocks): doneWriting superblocks and filesystem accounting information: doneThis filesystem will be automatically checked every 32 mounts or180 days, whichever comes first. Use tune2fs -c or -i to override.Connect time: Avg: 0 sec, Min: 0 sec, Max: 0 secCommand time: Avg: 1 sec, Min: 1 sec, Max:

42、 1 secFailures: 0initializing environment complete!双机软件License申请与导入hostid生成在服务器A中生成用户信息配置文件：rootvmserver_81 imoshaconf# cd /usr/local/imoshaconf/rootvmserver_81 imoshaconf# cp -rf clientinfo.ini.template clientinfo.ini将clientinfo.ini文件通过SSH导出到客户端，随后使用客户端文本编辑器进行修改，将其中的用户信息配置修改正确后再将该配置文件通过SSH导入到服务器/us

43、r/local/imoshaconf目录中，需要修改的配置参数说明如下：ClientInfoContractId=1234567890 合同编号UserName=张三 客户名称UserCountry=中国 国家UserProvince=浙江 省份UserCity=杭州 县市UserCompany=宇视科技 公司UserPhone电话UserAddress=杭州市滨江区 地址UserZipcode=310053 邮编UserEmail=test E-mail地址ContactName=李四 联系人姓名ContactCompany=宇视科技 联系人所在公司ContactP

44、hone=12341234 联系人电话ContactAddress=杭州市滨江区 联系人地址ContactZipcode=310053 联系人邮编ContactEmail=test 联系人E-mail地址将修改后的/usr/local/imoshaconf/clientinfo.ini配置文件同步到服务器B中。rootvmserver_85 imoshaconf# scp -r /usr/local/imoshaconf/clientinfo.ini root3:/usr/local/imoshaconf/clientinfo.ini在服务器A中执行如下命令，输入1回车，将获取的hostid文

45、件下载到本地并重命名保存：rootvmserver_83 usr# imoshatool.sh What do you want to do:1. Generate hostid file.2. Install License file.Please input your choice:1Begin to generate hostid file.Generate hostid file succeed.Output file is /usr/local/imoshaconf/hostid.id.在服务器B中执行如下命令，输入1回车，将获取的hostid文件下载到本地并重命名保存：rootvm

46、server_81 usr# imoshatool.sh What do you want to do:1. Generate hostid file.2. Install License file.Please input your choice:1Begin to generate hostid file.Generate hostid file succeed.Output file is /usr/local/imoshaconf/hostid.id.License申请激活获取到两台设备hostid文件后，用浏览器登录公司官网后申请激活License即可。License导入将申请到的*

47、.lic文件上传到主机服务器如下目录：/home/ha_easy_install执行./reloadhaconf.sh lic /home/ha_easy_install/license.lic(license的绝对路径)再将license导入至主备机：./ha_load_lic.shVM8500双机使用VM8500双机安装VM双机安装所有安装操作在只需要主机上进行，备机不需要操作。进入目录：cd /home/ha_easy_install执行VM安装脚本：./vmhainstall.sh0: Stopping all DRBD resources: .1: Stopping all DRBD

48、 resources: .*install local vm start*vm9500_Uniview/.install finishedInstall vm9500 succeededvm9500 install succ!*install local vm end*install remote vm start*1: vm9500_Uniview/1: install finished1: Install vm9500 succeeded1: vm9500 install succ!*install remote vm end*启动pacemaker服务启动pacemaker服务：./ha

49、_load_pacemakercfg.sh stop rvl: 050: Shutting down HASERVER services: OK 0:stop rvl: 051: Shutting down HASERVER services: OK 1:0: Starting Corosync Cluster Engine (corosync): OK 1: Starting Corosync Cluster Engine (corosync): OK WARNING: p_ping: specified timeout 30 for start is smaller than the ad

50、vised 60上述操作完成后，可以通过crm_mon命令查看启动状态Online: vm1 vm2 Resource Group: postgresDBIP(ocf:heartbeat:IPaddr2):Started vm1postgres_fs (ocf:heartbeat:Filesystem): Started vm1postgresql (ocf:heartbeat:imosstart): Started vm1Master/Slave Set: ms_drbd_postgres drbd_postgresMasters: vm1 Slaves: vm2 Clone Set: cl

51、_ping p_pingStarted: vm1 vm2 此时可以查看VM各个服务的状态vmserver.sh status已经启动正常VM8500双机升级两台服务器停止haserver服务rootvm1 ha_easy_install# /etc/init.d/haserv stoprootvm2 ha_easy_install# /etc/init.d/haserv stop两台服务器停止corosync服务rootvm1 ha_easy_install# /etc/init.d/corosync stoprootvm2 ha_easy_install# /etc/init.d/coros

52、ync stop确定两台服务器的主从配置查看两台服务器的配置文件：more /home/ha_easy_install/ha.conf | grep HAFLAG主机模式的服务器如下面红色字体所示，当前假定服务器A为主机模式：rootvm1 ha_easy_install# more /home/ha_easy_install/ha.conf | grep HAFLAGHAFLAG=1从机模式的服务器如下面红色字体所示，当前假定服务器B为从机模式：rootvm2 ha_easy_install# more /home/ha_easy_install/ha.conf | grep HAFLAGH

53、AFLAG=2修改配置文件1.升级操作在主机上进行，将升级交付件压缩包放至/home/ha_easy_install/imos_version 执行./reloadhaconf.sh vm /home/ha_easy_install/imos_version/VMPS50-IMOS110-B3323.tar.gz更改配置文件中VM的版本注：红色部分按照实际情况填写2.执行升级脚本进入目录：/home/ha_easy_install rootvm1 ha_easy_install# ./vmhaupdate.sh进行升级两台服务器启动corosync服务升级完毕之后，将corosync服务启动r

54、ootvm1 ha_easy_install# /etc/init.d/corosync startrootvm2 ha_easy_install# /etc/init.d/corosync startVM8500双机卸载两台服务器停止haserver服务rootvm1 ha_easy_install# /etc/init.d/haserv stoprootvm2 ha_easy_install# /etc/init.d/haserv stop两台服务器停止corosync服务rootvm1 ha_easy_install# /etc/init.d/corosync stoprootvm2 h

55、a_easy_install# /etc/init.d/corosync stop确定两台服务器的主从配置查看两台服务器的配置文件：more /home/ha_easy_install/ha.conf | grep HAFLAG主机模式的服务器如下面红色字体所示，当前假定服务器A为主机模式：rootvm1 ha_easy_install# more /home/ha_easy_install/ha.conf | grep HAFLAGHAFLAG=1从机模式的服务器如下面红色字体所示，当前假定服务器B为从机模式：rootvm2 ha_easy_install# more /home/ha_ea

56、sy_install/ha.conf | grep HAFLAGHAFLAG=2执行VM卸载脚本卸载操作在主机上进行。进入目录：cd /home/ha_easy_install执行卸载：rootvm1 ha_easy_install# ./vmhauninstall.sh两台服务器上卸载双机软件进入目录：cd /home/ha_easy_install执行卸载 rootvm1 ha_easy_install# ./bphauninstall.shVM+IS双机使用VM+IS双机安装所有安装操作在只需要主机上进行，备机不需要操作。VM双机安装进入目录：cd /home/ha_easy_insta

57、ll执行VM安装脚本：./vmhainstall.shIS双机安装进入目录：cd /home/ha_easy_install执行IS安装脚本：. /ishainstall.sh启动pacemaker服务启动pacemaker服务：./ha_load_pacemakercfg.sh VM+IS双机升级两台服务器停止haserver服务rootvm1 ha_easy_install# /etc/init.d/haserv stoprootvm2 ha_easy_install# /etc/init.d/haserv stop两台服务器停止corosync服务rootvm1 ha_easy_inst

58、all# /etc/init.d/corosync stoprootvm2 ha_easy_install# /etc/init.d/corosync stop确定两台服务器的主从配置查看两台服务器的配置文件：more /home/ha_easy_install/ha.conf | grep HAFLAG主机模式的服务器如下面红色字体所示，当前假定服务器A为主机模式：rootvm1 ha_easy_install# more /home/ha_easy_install/ha.conf | grep HAFLAGHAFLAG=1从机模式的服务器如下面红色字体所示，当前假定服务器B为从机模式：ro

59、otvm2 ha_easy_install# more /home/ha_easy_install/ha.conf | grep HAFLAGHAFLAG=2升级VM1.升级操作在主机上进行，将升级交付件压缩包放至/home/ha_easy_install/imos_version 执行./reloadhaconf.sh vm /home/ha_easy_install/imos_version/VMPS50-IMOS110-B3323.tar.gz更改配置文件中VM的版本注：红色部分按照实际情况填写2.执行升级脚本进入目录：/home/ha_easy_install rootvm1 ha_e

60、asy_install# ./vmhaupdate.sh进行升级升级IS1.升级操作在主机上进行，将升级交付件压缩包放至/home/ha_easy_install/imos_version 执行./reloadhaconf.sh is /home/ha_easy_install/imos_version/IS50-IMOS110-B3323.tar.gz更改配置文件中IS的版本注：红色部分按照实际情况填写2.执行升级脚本进入目录：/home/ha_easy_install rootvm1 ha_easy_install# ./ishaupdate.sh进行升级两台服务器启动corosync服务