H3CMSR930系统固件恢复.doc

H3C MSR 930 系统恢复1配置计算机IP地址并关闭系统防火墙将计算机的IP地址更改为10/24 ，关闭系统防火墙。2安装配置TFTP软件安装3com的tftp软件，并安装下图位置进行配置。将H3C MSR 930路由器的系统固件放到TFTP服务器的指定目录。3检查串口设备，并做相应的设置。按照下图设置COM接口。4启用SecretCRT，选择串口连接5线路连接Consol线连接电脑串口，电脑网线连接路由器的GE0口（WAN）6以下是设备升级的具体操作System is starting.Press Ctrl+D to access BASIC-BOOTWARE MENUDo you want to check SDRAM? Y/NBooting Normal Extend BootWareThe Extend BootWare is self-decompressing.Done!* * H3C MSR930 BootWare, Version 5.10 * *Copyright (c) 2004-2015 Hangzhou H3C Technologies Co., Ltd.Compiled Date : Dec 21 2015CPU Type : P1010CPU L1 Cache : 32KBCPU L2 Cache : 256KBCPU Clock Speed : 533MHzMemory Type : DDR3 SDRAMMemory Size : 256MBMemory Speed : 667MHzBootWare Size : 1024KBFlash Size : 128MBCPLD Version : 1.0PCB Version : 3.0BootWare Validating.Application program does not exist.BootWare password: Not required. Please press Enter to continue.Password recovery capability is enabled.Note: The current operating device is flashEnter to select device.=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Restore to Factory Default Configuration | Skip Current System Configuration | BootWare Operation Menu | Clear Super Password | Storage Device Operation | Reboot |=Ctrl+Z: Access EXTEND-ASSISTANT MENUCtrl+F: Format File SystemCtrl+C: Display CopyrightEnter your choice(0-9): 3 进入以太网子菜单=|Note:the operating device is flash | Download Application Program To SDRAM And Run | Update Main Application File | Update Backup Application File | Update Secure Application File | Modify Ethernet Parameter | Exit To Main Menu | |=Enter your choice(0-5): 5 修改以太网配置=|Note: . = Clear field. | - = Go to previous field. | Ctrl+D = Quit. |=Protocol (FTP or TFTP) :tftp tftp 选择协议tftpLoad File Name :MSR93X-CMW520-R2513P21.BIN :MSR93X-CMW520-R2516P02.BIN 系统文件的名称（和D:TFTP下的文件名称一致）Target File Name :MSR93X-CMW520-R2513P21.BIN :MSR93X-CMW520-R2516P02.BIN 保存到路由器的系统文件名称Server IP Address :2 10 计算机的IP地址Local IP Address :3 路由器的IP地址Gateway IP Address : 网关不用配置=|Note:the operating device is flash | Download Application Program To SDRAM And Run | Update Main Application File | Update Backup Application File | Update Secure Application File | Modify Ethernet Parameter | Exit To Main Menu | |=Enter your choice(0-5): 2 这里升级主程序文件Loading.Done!32574464 bytes downloaded!Updating File flash:/MSR93X-CMW520-R2516P02.BIN.Done!=|Note:the operating device is flash | Download Application Program To SDRAM And Run | Update Main Application File | Update Backup Application File | Update Secure Application File | Modify Ethernet Parameter | Exit To Main Menu | |=Enter your choice(0-5): 0 这里升级完成，需要返回主菜单=| Boot System | Enter Serial SubMenu | Enter Ethernet SubMenu | File Control | Restore to Factory Default Configuration | Skip Current System Configuration | BootWare Operation Menu | Clear Super Password | Storage Device Operation | Reboot |=Ctrl+Z: Access EXTEND-ASSISTANT MENUCtrl+F: Format File SystemCtrl+C: Display CopyrightEnter your choice(0-9): 1 升级完成，重启设备Starting to get the main application file-flash:/MSR93X-CMW520-R2516P02.BIN!.The main application file is self-decompressing.Done!System application is starting.Startup configuration file does not exist.It will take a long time to get configuration file, please wait.Retrieving configuration file failed!User interface aux0 is available.到目前为止，系统已经恢复完毕，并且新系统已经启动。Press ENTER to get started.#Jan 1 00:01:15:249 2012 H3C SHELL/4/LOGIN: Trap .4.1.2550.: login from Console%Jan 1 00:01:15:249 2012 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.system-view 进入系统视图System View: return to User View with Ctrl+Z. H3Cdisplay current-configuration 查看系统当前配置信息# version 5.20, Release 2516P02 当前系统的版本信息# sysname H3C# domain default enable system# dns proxy enable# telnet server enable# dar p2p signature-file flash:/p2p_default.mtd# ndp enable# ntdp enable# cluster enable# port-security enable# password-recovery enable#vlan 1 #domain system access-limit disable state active idle-cut disable self-service-url disable#dhcp server ip-pool vlan1 extended network ip range 54 network mask gateway-list dns-list #user-group system group-attribute allow-guest#local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet service-type web#cwmp undo cwmp enable#interface Aux0 async mode flow link-protocol ppp#interface Cellular0/0 async mode protocol link-protocol ppp tcp mss 1024#interface NULL0#interface Vlan-interface1 ip address tcp mss 1024 dhcp server apply ip-pool vlan1#interface GigabitEthernet0/0 port link-mode route tcp mss 1024#interface GigabitEthernet0/1 port link-mode bridge#interface GigabitEthernet0/2 port link-mode bridge#interface G