NACE_CODE 标准汇总.doc

NACE CIP LEVEL 1REFERENCE MATERIALS:The following are excellent reference materials for anyone planning to take CIP Level 1. Students are not expected to purchase these materials. However, if you have access to any of these materials we encourage you to review them. NACE Standard RP0188 (latest revision), Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates NACE Standard RP0178 (latest revision), Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service NACE No. 1/SSPC-SP 5 (latest revision), White Metal Blast Cleaning NACE No. 2/SSPC-SP 10 (latest revision), Near-White Metal Blast Cleaning NACE No. 3/SSPC-SP 6 (latest revision), Commercial Blast Cleaning NACE No. 4/SSPC-SP 7 (latest revision), Brush-Off Blast Cleaning SSPC-VIS 1 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning SSPC-VIS 3 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning SSPC-PA 2 (latest revision), Measurement of Dry Coating Thickness with Magnetic Gages ISO 8504-2 (latest revision), Preparation of Steel Substrates Before Application of Paints and Related ProductsSurface Preparation MethodsPart 2: Abrasive Blast Cleaning ASTM D 4417 (latest revision), Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel ASTM E 337 (latest revision), Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) ASTM D 4414 (latest revision), Standard Practice for Measurement of Wet Film Thickness by Notch Gages The Protective Coating Users Handbook, by Dr. Louis D. Vincent Generic Coating Types: An Introduction to Industrial Maintenance Coating Materials (Available from SSPC)NACE CIP LEVEL 2REFERENCE MATERIALS:The following are excellent reference materials for anyone planning to take CIP Level 2. Students are not expected to purchase these materials. However, if you have access to any of these materials we encourage you to review them. NACE Standard RP0188 (latest revision), Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates NACE Standard RP0178 (latest revision), Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service NACE Publication 6A192/SSPC-TR 3 (latest revision), Dehumidification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed Spaces NACE No. 5/SSPC-SP 12 (latest revision), Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating NACE No. 12/AWS C2.23M/SSPC-CS 23.00 (latest revision), Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel SSPC-PA 2 (latest revision), Measurement of Dry Coating Thickness with Magnetic Gages ASTM D 4417 (latest revision), Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel ASTM E 337 (latest revision), Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) ASTM D 4414 (latest revision), Standard Practice for Measurement of Wet Film Thickness by Notch Gages SSPC-VIS 1 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning SSPC-VIS 3 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning NACE VIS 7/SSPC-VIS 4 (latest revision), Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting Corrosion Prevention by Protective Coatings, Second Edition, By C.G. Munger, Revision Author L.D. Vincent (Available from NACE. This book will be distributed to students at the CIP Level 2 course.) Generic Coating Types: An Introduction to Industrial Maintenance Coating Materials (Available from SSPC)NACE ALL STANDARDS:ANSI/NACE Standard RP0104-2004 The Use of Coupons for Cathodic Protection Monitoring Applications ANSI/NACE Standard RP0204-2004 Stress Corrosion Cracking (SCC) Direct Assessment Methodology Essentials of Surface Preparation MR0103MR0103-2005 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments MR0174MR0174-2001 Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants MR0176MR0176-2000 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments NACE MR0175/ISO 15156, Petroleum and natural gas industriesMaterials for use in H2S-containing environments in oil and gas production NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels NACE No. 12/AWS C2.23M/SSPC-CS 23.00 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning NACE No. 5/SSPC-SP 12 Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning NACE VIS 7/SSPC-VIS 4 Guide and Visual Reference Photographs for Steel Cleaned by Waterjetting NACE VIS 9/SSPC-VIS 5 Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning NACE/SSPC Joint Surface Preparation Standards Package (NACE No 1,2,3,4,5,6,8) RP0100RP0100-2004 Cathodic Protection of Prestressed Concrete Cylinder Pipelines RP0102RP0102-2002 In-Line Inspection of Pipelines RP0169RP0169-2002 Control of External Corrosion on Underground or Submerged Metallic Piping Systems RP0170RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment RP0176RP0176-2003 Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production RP0177RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems RP0178RP0178-2003 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service RP0180RP0180-2001 Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers RP0185RP0185-96 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe RP0186RP0186-2001 Application of Cathodic Protection for External Surfaces of Steel Well Casings RP0187RP0187-05 Design Considerations for Corrosion Control of Reinforcing Steel in Concrete RP0188RP0188-99 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates RP0189RP0189-2002 On-Line Monitoring of Cooling Waters RP0191RP0191-2002 The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories RP0192RP0192-98 Monitoring Corrosion in Oil and Gas Production with Iron Counts RP0193RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms RP0195RP0195-2001 Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment RP0196RP0196-2004 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks RP0197RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files RP0198RP0198-2004 The Control of Corrosion Under Thermal Insulation and Fireproofing MaterialsA Systems Approach RP0199RP0199-2004 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment RP0200RP0200-2000 Steel-Cased Pipeline Practices RP0273RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids RP0274RP0274-2004 High-Voltage Electrical Inspection of Pipeline Coatings RP0281RP0281-2004 Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures RP0285RP0285-2002 Corrosion Control of Underground Storage Tank Systems by Cathodic Protection RP0286RP0286-2002 Electrical Isolation of Cathodically Protected Pipelines RP0287RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape RP0288RP0288-2004 Inspection of Linings on Steel and Concrete RP0290RP0290-2000 Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures RP0291RP0291-2005 Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories RP0292RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment RP0294RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures RP0295RP0295-2003 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars RP0296RP0296-2004 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments RP0297RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators RP0298RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service RP0300RP0300-2003 Pilot Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Water Systems RP0302RP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service RP0303RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control RP0304RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines RP0375RP0375-99 Wax Coating Systems for Underground Piping Systems RP0386RP0386-2003 Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service RP0387RP0387-99 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications RP0388RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks RP0390RP0390-98 Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures RP0391RP0391-2001 Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures RP0392RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems RP0394RP0394-2002 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating RP0395RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars RP0398RP0398-98 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors RP0399RP0399-2004 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control RP0402RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control RP0403RP0403-2003 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping RP0472RP0472-2000 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments RP0475RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations RP0487RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection RP0490RP0490-2001 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 m (10 to 30 mils) RP0491RP0491-2003 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems RP0492RP0492-99 Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes RP0495RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries RP0497RP0497-2004 Field Corrosion Evaluation Using Metallic Test Specimens RP0502RP0502-2002 Pipeline External Corrosion Direct Assessment Methodology RP0572RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds RP0575RP0575-2001 Internal Cathodic Protection Systems in Oil-Treating Vessels RP0590RP0590-96 Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking RP0592RP0592-2001 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service RP0602RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control RP0690RP0690-2004 Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input RP0692RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars RP0775RP0775-2005 Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations RP0892RP0892-2001 Coatings and Linings Over Concrete for Chemical Immersion and Containment Service SPECIALTY PACKAGE: Application of Railcar Coating Systems SPECIALTY PACKAGE: Cathodic Protection of Pipelines/Tanks SPECIALTY PACKAGE: Corrosion Control of Rebar SPECIALTY PACKAGE: RP0285-2002 / API RP 1632 SSPC-VIS 2 Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces TM0101TM0101-2001Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems TM0102TM0102-2002 Measurement of Protective Coating Electrical Conductance on