PL0101产品使用手册中文.doc

Powerline产品使用手册 cnkdx 技术手册PLC网桥：PLA0101用户手册产品简介 本设备是用于连接PLC网络和以太网的桥接设备，内建一个10M的交换机口。您可将以太网接入到此设备中，自动交叉的交换机口确保使用的简单性利用普通的220V电力线进行高速数字信号传输。这是一种无需重新布线的理想解决方案。和传统的以太网相类似，PLC网络技术在无需重新布线的情况下提供经济的网络共享。本产品通过 HomePlug的产品认证，本产品利用普通的电力网提供最大为14Mbps的连接速度。将以太网连接到PLCM网络PLA0101简介 产品外观LED 指示灯LED颜色功能Power绿色亮: 设备已供电暗: 电源没有接通Powerline Act绿色亮: 系统已经初始化闪烁: 系统在接收/传送数据暗: 没有连接到PLC网络Link/Activity绿色亮: 以太网口连接完好闪烁: 以太网口在接收/传送数据暗: 以太网没有连接以太网口用于连接以太网设备, 例如 hub或者switch, 以及带网卡的电脑。电源口此口一方面为设备本身供电，另一方面将数据信号从此接口注入到电力网中。硬件安装 将设备平稳的放置于工作场所将电源线插入设备的电源口1. 使用标准的RJ-45以太网线从设备的交换口连接服务器、工作站或者PC机2. 如果需要可以将别的hub/switch使用标准的RJ-45以太网线连接到设备的交换口. 用户无需用特殊的交叉线做级连。3. 确保所有的缆线安装正确后，将电源线接入到电源插座中。注意事项1. 介于设备和PC/hub/Switch 中的网线不得超过100 米。2. 确保缆线的正确性. 在 10Mbps 时, 3/4/5 类线均可 用以连接. 为确保工作于100Mbps, 你必须使用 5 或更好的线.有关问题 Q: 什么是PLC网络?A: Powerline network uses a homes existing electrical wiring and jacks, along with special adapters and software, to connect multiple PCs for PC peripheral sharing, data sharing and Internet sharing.Q: 为什么我需要PLC网络?A: Both powerline and wireless are for no-new-wire home networking. Powerline network can deliver reliable and long range transmission of home streaming Audio/Video data without the limitation of RF characteristics. Also based on HomePlug 500 home field test, the performance is 50% to 150% better than 802.11b.Q:在PLC网络中我需要些什么设备?A: Similar to Ethernet, just buy the PCI or USB adapters installed in each PC, plug the power cord into the power outlet and get networked!Q: PLC网络的速度是多少?A: Its up to 14Mbps based on HomePlug 1.0 standard and with the migration path to 100Mbps and beyond.Q: PLC网络的最大工作模式是什么?A: It is 232 nodes according to HomePlug 1.0 standard. Based on the real implementation, you will get the best performance within 15 active nodes though all nodes can communicate with each other. These 15 nodes change dynamically based on the most recent active nodes criteria.Q: 在PLC网络中能共享以太网吗?A: Sure! Just buy a powerline broadband router, sharing your Broadband Internet account through the power line in your home!Q: 我现有的以太网设备能和PLC网络通信吗?A: Yes, the powerline to Ethernet bridge makes Ethernet and powerline network connected transparently. Or you can utilize the Ethernet port on a powerline broadband router, it is with unique multi Ethernet port design and enables flexible application.Q: 我现有的无线设备能和PLC网络通信吗?A: Just plug your wireless access point into the Ethernet port of the powerline to Ethernet bridge, or the one of the powerline broadband router. The router has unique multi Ethernet port design, it makes your application more flexible.Q: 家用电器会对PLC网络有影响吗?A: No. The HomePlug standard has great signal processing algorithm to overcomes the noise, but only the transmission speed will get a little bit lower.Q: 我能将PLC设备的电源线接到 UPS中吗?A: You will get the best performance when plugged directly into the wall outlet. Its better not to be plugged into UPSs or power strips due to the insertion loss though it still can work.技术参数 支持标准IEEE802.3/802.3uHomePlug Powerline Alliance Specification 1.0/1.0.1接口一个 10/100 RJ-45 口一个 2针电源/信号接口调制方式OFDMDQPSK/DBPSKMAC 控制协议Powerline: CSMA/CAEthernet: CSMA/CD最大带宽PowerlineEthernet最大14Mbps全双工: 200Mbps (for 100BASE-TX), 20Mbps (for 10Base-T)半双工: 100Mbps