立铣头本体加工工艺及镗孔工装设计

资源目录

立铣头本体加工工艺及镗孔工装设计.zip

设计说明书.doc---(点击预览)

工艺过程卡.doc---(点击预览)

工序.doc---(点击预览)

外文翻译.docx---(点击预览)

夹具体.dwg

夹具装配图.dwg

毛坯图.dwg

立铣头本体.dwg

压缩包内文档预览：

编号：6377830 类型：共享资源大小：1000.57KB 格式：ZIP 上传时间：2017-12-12 上传人：小*** IP属地：福建

50
积分

版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载

关键词：: 立铣头本体加工工艺镗孔工装设计

资源描述：

!【包含文件如下】【工艺设计类】CAD图纸+word设计说明书.doc【需要咨询购买全套设计请企鹅97666224】.bat

外文翻译.docx
夹具体.dwg
夹具装配图.dwg
工序.doc
工艺过程卡.doc
毛坯图.dwg
立铣头本体.dwg
设计说明书.doc

摘要
立铣头本体的设计涉及到了《数控技术及其应用》《数控加工程序编制》《数控加工工艺》《金属切削工艺人员手册》《机械制造工艺学教材》《机床夹具设计》等专业课的知识。
这套设计说明书的内容包括零件的分析、毛坯的确定毛坯图的绘制、加工设备的选定、工艺规程的设定、专用夹具的设计夹具设计图夹具装配图等。这套说明书简明的说明了本设计的要求与步骤。
在这课题的设计中，可能因为本身能力的有限，可能在设计中有些许错误或遗漏不足之处，恳请批阅的老师能给与批评与指正。

关键词：毛坯图、工艺规程，夹具装配图，专用夹具

Abstract
Vertical milling head ontology design involves the numerical control technology and its application in the nc machining programming, the nc machining process of the metal cutting process engineering handbook \"mechanical manufacturing technology of the teaching material\" machine tool fixture design and other professional course knowledge.
The content of this design manual including part of analysis, the determination of blank blank figure drawing, selection of processing equipment, technical process, the design of special fixture fixture design fixture assembly drawings, etc. This manual concise with the design requirements and steps.
In the design of this topic, perhaps because of itself ability is limited, may have some errors or omissions in design deficiency, begging examines teacher to criticize and correct me.

Keywords: blank drawing, process planning, fixture assembly drawing, special fixture

目    录
摘    要    ……………………………………………………………………2
Abstract      …………………………………………………………………3
序    言    ……………………………………………………………………5
第一章立铣头的加工工艺及设计 ………………………………………… 6
一、工艺规程指定的步骤及方法    …………………………………… 6
二、零件的分析    ……………………………………………………… 6
三、选择加工设备与刀、夹、量具   ……………………………………9
四、工艺规程的设计     …………………………………………………10
五、加工工序设定   ………………………………………………………13
第二章立铣头零件专用夹具的设计…………………………………………15
一、立铣头本体镗孔夹具设计   …………………………………………15
二、问题的提出     ………………………………………………………15
三、设计夹具的基本要求   ………………………………………………15
四、对夹具体的要求   ……………………………………………………16
五、定位误差的分析   ……………………………………………………16
六、夹紧力及强度校核的计算   ……………………………………… 17
七、定位基准的选择 …………………………………………………… 18
八、铣削力与夹紧力的计算   ……………………………………………18
九、夹具体槽形与对刀装置设计 …………………………………………18
十、夹紧装置及夹具体设计 ………………………………………………20
十一、夹具设计及操作的简要说明    …………………………………21
总    结     ……………………………………………………………………22
参考文献     ……………………………………………………………………23

工序.jpg

工艺过程卡.jpg

夹具体.png

夹具装配图.png

立铣头本体.png

毛坯图.png

目录.jpg

全部文件.jpg

文档页面.jpg

内容简介：: 淬硬齿轮的加工【摘要】用于动力传动的齿轮和齿轮箱，其尺寸要求更小，齿轮传动的噪音更低，从而导致对淬硬齿轮的需求，也给齿轮制造厂家提出了探索齿轮加工新方法的要求.概述用于动力传动的齿轮和齿轮箱，其尺寸要求更小，齿轮传动的噪音更低，从而导致对淬硬齿轮的需求，也给齿轮制造厂家提出了探索齿轮加工新方法的要求。齿轮在淬硬热处理过程中，其材料组织及应力的改变，通常会使齿轮产生变形，即齿形、齿向及齿距误差。这此误差将引起齿廓在传动时的不正确啮合，从而加大了载荷，产生齿轮噪音。因此，淬硬齿轮在热处理后，一般应添加一道精加工工序。淬硬齿轮精加工工艺可分为两类：一类是采用非成形的切削刃，如齿轮磨削加工；另一类则是具有成形的切削刃如淬硬齿轮(HRC48 53) 滚削加工。本文将集中讨论用于硬滚齿加工的硬质合金刀具成形切削刃的精加工过程。当今的硬质合金材料、刀具涂层和滚齿机技术的发展，已使淬硬齿轮滚切加工技术有了显著的提高，特别是在加工小于或等于 12DP 的中小模数齿轮时，可承受硬切削过程中所产生的极大的切削力。硬质合金滚刀的选取硬质合金滚刀在材料的品种规格上有很大进展。超细、细、中等或大颗粒的硬质合金现在都有产品。此外，硬质合金滚刀毛坯的成形工艺技术也有了显著提高，如采用热等静压(HIP)工艺，该工艺在高压高温下，增加了硬质合金毛坯的内在结合力，提高了硬质合金的抗弯强度。按照 ISO 的规定，实体硬质合金材料可按应用场合的不同分为若干类：齿轮切削刀具分为 K 类和 P 类，K 类硬质合金有更高的耐磨性，P 类则有更好的高温红硬性。在 K 牌号和 P 牌号硬质合金中，每种牌号硬质合金的颗粒结构是不同的，从中等颗粒到超细颗粒。每种牌号都有其应用场合，这是和颗粒结构相关联的。一般来说，对于软滚削，K 类比 P 类的性能要好，K 类硬质合金能得到微米级的颗粒结构 (粒度小于0.5m)，而 P 类则不行。在磨耗方面，K 类韧性更好，寿命更长。滚刀的重新刃磨和翻新滚刀加工一定数量的工件后，其切削刃变钝，此时必须重新刃磨。刃磨后的滚刀必须保持原有的几何形状；切削刃必须锋利；刀具的金相结构绝不可因磨削过热而受破坏。因而在刃磨硬质合金滚刀时应采用一种油基冷却液，它对氯和硫不起反应。对于刮削滚刀，刃磨后的重新涂层并不象用于实体毛坯硬滚的滚刀那样重要。硬质合金滚刀刃磨后涂层前，建议对其刃口进行预处理。滚刀的重新刃磨将会除去切削表面的原有涂层，这会减少刀具寿命。刀具是可以重涂的。通常对于 TiN 涂层，可涂 34 次；对于 TiCN 和 TiALN 涂层而言，由于涂层本身有很大的内应力，所以在切削刃上难以再重新涂层。通过几次涂覆 TiN 涂层后，会产生高低不均匀的状况，并有分层脱落的倾向，所以原有涂层必须去除。目前有两种方法可去除刀具涂层：化学退涂和物理退涂。用化学退涂去除硬质合金刀具上的涂层是一种精细工艺，要求操作者有相当的熟练程度。过度的化学退涂不仅将涂层去掉，而且还将溶洗钴结合剂，损坏硬质合金材料的微观结构。切削刃的微观损坏将产生锯齿状表面。此外，在退涂时必须对滚刀轴台、内孔及标志进行保护，以免损坏。而物理去涂，则必须由原刀具制造厂来进行，它涉及到整把滚刀齿形的重新磨削。虽然比化学退涂要贵得多，但得到的是一把新滚刀，质量和寿命都能得到保证。对滚齿机的要求为了充分发挥硬质合金和涂层工艺的优点，滚齿机应作相应地改进。目前所有先进的滚齿机都按高速滚齿进行设计，其滚齿机的滚刀转速超过3000r/min，通常为 5000r/min，工件主轴转速与滚刀转速相匹配。此外，机床具有很高的动刚度和热刚度。先进滚齿机的一些主要设计特点为：采用复合环氧树脂床身，以改进机床的动态和静态特性；带有恒温装置的高速滚刀主轴箱；高速工件主轴；可采用干、湿二种滚削工艺；带光电传感器的数字驱动系统；直线滚动导轨系统；高速自动上料(23 秒)；占地紧凑；按人机工程学设计；维修方便。采用刮削工艺无论是机械式的还是 CNC 的滚齿机都能进行刮削，但条件是机床必须装备有工件到刀具的自动同步传动系统。这可使刮削工艺更为经济，对带有自动上下料系统的机床也很重要。电子非接触系统靠一个模拟量传感器发出脉冲来测量刀具主轴、工件主轴和齿轮的位置。机床 CNC 控制器对这些脉冲进行处理，然后对工件主轴相对于刀具的位置进行调整，使工件轮齿和滚刀刀齿的相对位置关系正确。在刮削工艺中用冷却液有很多优点：在刮削过程中，冷却液提供了润滑性；由于刮削产生的不是正常的切屑，温度控制极其重要。刮下的切屑较小较薄，不象正常刀屑那样可带走许多热量，所以刮削时采用冷却液可控制刀具、工件及机床系统的温度；冷却液可将切屑从刀具和工件上冲走；改善了工件表面精糙度；提高了刀具寿命。在“绿色滚削”工艺中，正确选择齿厚余量是很重要的。推荐选择顺铣滚齿，因为它可得到最厚的切屑，这有助于控制切削过程的动态状况，提高刀具寿命。经验证明，切削速度可以超过 200m/min，进给量的选择取决于所要达到的表面光洁度。典型进给范围为 0.51.25mm/r。刀具移位(窜刀)的方法也很重要，因为刮削时只有粗加工截面的部分切削刃才经受磨损。相反，在“绿色切削”过程中，刀具的精加工部分承担了主要加工量。这意味着在刮削时窜刀量应更大，如齿轮为 1248DP 时，每次窜刀量为 0.30.4mm。刮削滚刀的选取刮削硬质合金滚刀分为两大类：用于 10DP 或更大模数的滚刀，通常都设计有一个负前角的切削前面，当切削刃接触到淬硬齿面时，减小了对硬质合金材料的冲击；对于较小模数的齿轮，就不需要有负前角。负前角的滚刀的缺点是刃磨困难。滚刀刃磨后外径减小，为了得到正确的负前角就应改变砂轮的偏置量。当刮削中、大模数齿轮时，其齿顶、外圆直径和齿根部位通常都不被滚削，并要求轮齿到齿根有一个平滑的过渡。为得到沉切和完整的过渡圆弧半径，提高齿根的抗弯强度，用于大模数齿轮的理想刮削滚刀应带有凸缘。对于小模数齿轮的加工，应采用标准滚刀。采用标准的径向前角硬质合金滚刀加工称为“硬质合金滚刀的再滚切” ，而不是“刮削” ，后者指的是采用了一个负前角滚刀。硬滚削的技术要求和硬刮削、或硬质合金滚刀再滚削的技术要求几乎相同，不同之处是采用的窜刀移位的策略不同。在硬滚时，切屑的切除需花费大量能量。该能量最终变为热量。设法把这些热量散发带走至关重要。建议每加工一个工件后，滚刀窜位一个全齿距。当滚刀从头到尾窜位过后，应将滚刀移到离原始位置有一个偏置量的部位。该偏置量取决于滚刀的设计和应用，其目的是为了有助于滚刀的均匀磨损。另一不同之处是所采用的装夹系统。由于极大的切削力，夹具必须安全夹紧工件。加工结果表明，同一斜齿轮用硬质合金滚刀再硬滚时，其齿轮质量很高，齿形接近 AGMA10 级，齿向和齿距超过AGMA12 级；全淬硬毛坯硬滚切加工的斜齿轮，其齿轮精度也非常高，齿形精度可达 AGMA10 级，齿向和齿距可达到 AGMA12 级。 Hard gear processingabstract uses in the power drive gear and the gear box, its size request smaller, the gear drive noise is lower, thus causes to the hard gear demand, also gave the gear manufacturer to propose explored the gear to process the new method the requestHard alloy hob selection The hard alloy hob has the very big progress in the material variety specification. Superfine, is thin, medium or the big pellet hard alloy now all has the product. In addition, the hard alloy hob semifinished materials formed craft technology also had the remarkable enhancement, like uses static pressure and so on heat (HIP) the craft, this craft under the high-pressured high temperature, increased the hard alloy semifinished materials intrinsic binding force, enhanced the hard alloy anti- curved intensity. According to the ISO stipulation, the entity hard alloy material may differently divide into certain kinds according to the application situation: The gear cutting tool divides into K kind and P kind, K kind of hard alloy has a higher resistance to wear, P kind then has the better high temperature red hardness. In the K trademark and in the P trademark hard alloy, each kind of trademark hard alloy granular structure is different, from medium pellet to superfine pellet. Each kind of trademark all has its application situation, this is and the granular structure is connected. Generally speaking, regarding softly rolls truncates, the K analogy P kind of performance is friends with, K kind of hard alloy can obtain a micron level the granular structure (granularity to be smaller than 0.5 mu m), but P kind then is not good. In abrasion aspect, K kind of toughness better, the life is longer. To gear-hobbing machine request In order to fully displays the hard alloy and the coating craft merit, the gear-hobbing machine should do correspondingly improves. At present all advanced gear-hobbing machines all press high speed roll the tooth to carry on the design, its gear-hobbing machine hob rotational speed surpasses 3000r/Min, usually is 5000r/Min, the work piece main axle rotational speed and the hob rotational speed match. In addition, the engine bed has very high moves the rigidity and the hot rigidity. The advanced gear-hobbing machine some main design characteristics are: Uses the compound epoxy resin lathe bed, by improves the engine bed the tendency and the static characteristic; Has the constant temperature installment the high speed hob headstock; High speed work piece main axle; May use does, the wet two kinds rolls truncates the craft; Belt electro-optical sensor digital actuation system; The straight line rolls the guide rail system; High speed automatic high-quality goods (2 3 seconds); The occupying a land area of is compact; According to man-machine engineering design; Services conveniently. The hob resharpens and renovates After the hob processing certain quantity work piece, its cutting edge failure, this time must resharpen. Sharpens the after hob to have to maintain the original geometry shape; The cutting edge must be sharp; The cutting tool golden phase structure cannot because rub truncates the heat but to destroy. Thus when sharpens the hard alloy hob should use one kind of oil base refrigerant, it does not get up to the chlorine and the sulfur the response. Regarding scrapes the hob, sharpens after the coating not likely to use in hob such which the entity semifinished materials hardly rolls being important again. After the hard alloy hob sharpens in front of the coating, suggested carries on the pretreatment to its cutting edge. The hob rewill sharpen can except the cutting surface original coating, this will be able to reduce the cutting tool life. The cutting tool is may again spread. Usually regarding the TiN coating, may spread 3 4; Says regarding TiCN and the TiALN coating, because coating itself has the very big internal stress, therefore on cutting edge with difficulty again again coating. After several spreading TiN coating, can have the height non-uniformity condition, and influentials the tendency which the level falls off, therefore the original coating must remove. At present has two methods to be possible to remove the cutting tool coating: Chemistry draws back spreads draws back with physics spreads. Draws back with chemistry spreads removes on the hard alloy tools the coating is one kind of fine craft, requests the operator to have the suitable level of expertise. The excessively chemistry draws back spreads not only removes the coating, moreover also will dissolve washes the cobalt cement, the damage hard alloy material microscopic structure. The cutting edge microscopic damage will produce the zigzag surface. In addition, when draws back spreads must to the hob pillow block, in the hole and the sign carries on the protection, in order to avoid damages. But physics spreads, then must carry on by the original cutting tool factory, it involves to puts in order rerubs the hob tooth profile truncates. Although draws back chemistry spreads must be much more expensive than, but obtains is a new hob, the quality and the life all can obtain the guarantee. Uses scrapes the craft Regardless of is the mechanical type the CNC gear-hobbing machine all can carry on scrapes, but the condition is the engine bed must equip has the work piece to the cutting tool selsyn train system. This may cause to scrape the craft economically, to has on the automatic yummy treats system the engine bed very to be also important. The electronic non- contact system depends on a simulation quantity sensor to send out the pulse to survey the cutting tool main axle, the work piece main axle and the gear position. The engine bed CNC controller carries on processing to these pulses, then is opposite to the work piece main axle in the cutting tool position carries on the adjustment, causes a work piece turn of tooth and the hob knife tooth relative position relations is correct. Rolls in the green truncates in the craft, correctly chooses the tooth thick remainder is very important. The recommendation choice down milling rolls the tooth, because it may obtain the thickest scrap, this is helpful to the control cutting process dynamic condition, enhances the cutting tool life. The experience proved that, the cutting speed may surpass 200m/Min, enters for the quantity choice is decided by the superficially attractive fineness which must achieve. The model enters for the scope is 0.5 1.25mm/R. The cutting tool shifts (flees knife) the method very to be also important, because scrapes time only then the rough machining section partial cutting edges only then undergo the attrition. On the contrary, in the green cutting in the process, the cutting tool precision work has partially undertaken the main process load. This meant when scraping flees the knife quantity to be supposed to be bigger, when like the gear is 12 48DP, each time flees the knife quantity is 0.3 0.4mm. Scrapes the hob the selection Scrapes the hard alloy hob to divide into two big kinds: Uses in 10DP or the bigger modulus hob, usually all designs has a negative rake front the cutting, when the cutting edge contacts to the hard tooth face, reduced to the hard alloy material impact; Regarding the small modulus gear, does not need to have the negative rake. The negative rake hob shortcoming is sharpens the difficulty. After the hob sharpens the outer diameter to reduce, in order to obtain the correct negative rake to be supposed to change the grinding wheel the bias quantity. Hardly rolls the specification which truncates and hardly scrapes the specification which, or the hard alloy hob rolls again truncates nearly same, similarity is uses the strategy which flees the knife to shift to be different. When hardly rolls, the scrap excision must spend the massive energies. This energy finally becomes the quantity of heat. Tries to carry off very important these thermal sending out. After the suggestion processes a work piece every time, the hob flees a position entire tooth pitch. When the hob will flee from beginning to end the position from now on, will be supposed to transfer to the hob to the initial position has a bias quantity the spot. This bias quantity is decided by the hob design and the application, its goal is for be helpful to the hob uniform wear. Another one similarity is the attire which uses clamps the system. As a result of the enormous cutting force, the jig must safely clamp the work piece. The processing result indicated that, the identical helical gear when hardly rolls again with the hard alloy hob, its gear quality is very high, the tooth profile approaches the AGMA10 level, the tooth to surpasses the AGMA12 level with the tooth pitch; The entire hard semifinished materials hardly roll cut the processing the helical gear, its gear precision extremely is also high, the tooth profile precision may reach the AGMA10 level, the tooth to may achieve the AGMA12 level with the tooth pitch. When scrapes, the big modulus gear, its addendum, the outer annulus diameter and the tooth root spot all are usually not rolled truncates, and has a smooth transition

温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。