培训ci-a智能管家demo使用说明

1、智能管家DEMO 使用说明Chipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 1 / 14.Chipelli Technology Co.,.S. Thisis not to be

2、reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 2 / 14.文件历史HISTORY PAGE文档NO：CI-FAE-470016REV: A版本号 Rev. NO.发起者 Originator描述 Description日期 DateA新建智能管家 DEMO使用说明

3、2018/05/19Chipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 3 / 14.文件名 Title: 智能管家 DEMO 使用说明生效日期 Effective Date: 20

4、18-05-19职位itionName签名 Signature日期Date(YYYY-MM-DD)发起者 Originator2018-05-19审核 Checked by余 杰余 杰2018-05-19批准 Approved by余 杰余 杰2018-05-19目录板子型号及串口使用5单、双麦 demo 板：51.2 单麦邮票：61.3 单 mic 插针贴片兼容板71.4 通麦量产板7数据串口协议9通信协议数据格式9收到的串口协议数据示例9语音模块主动外发数据协议10外部控制命令串口通讯协议131、回显是指发送给语音模块的指令, 语音模块会原样发送回来；142、校验累加和及声音默认是打开的状

5、态。145 其他问题引导14Chipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 4 / 14.1 板子型号及串口使用1.1 单、双麦 demo 板：板号： CI1006A1CD01o

6、r CI1006A2CD01适用范围：仅用于测试，不建议量产注意事项：CI1006A1CD01 为不带 DSPCI1006A2CD01：为带 DSP，只支持单 mic，支持单 mic 和双 mic 的测试1.2 单麦邮票：板号：CI1006A1CS01(codec：8388),可以用 CI1006A1CS02（codec：8374）替换适用范围：产品批量贴片生产注意事项：CI1006A1CS01 的 MCLK 和6 在 CI1006A1CS02 上为 GNDChipelli Technology Co.,.S. Thisis not to be reproduced, modified, ad

7、apted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 5 / 14.1.3 单 mic 插针贴片兼容板板号：CI1006A1CSD02适用范围：单 mic 产品批量贴片 or 插针生产注意事项：该板子与 CI1006A1CS02 的 pin 脚定义一致，只是多出一排插针Chipelli Technology Co.,.S

8、. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 6 / 14.1.4 通麦量产板板号：CI1106A2CAL02适用范围：通注意事项：无mic 板Chip. Thiselli Technology Co.,.Sis not to

9、be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 7 / 14.备注一，串口说明：1、Uart0 为系统信息打印， demo 固件默认波特率为 115200，8bit，可以在 pc上利用串口工具查看打印信息；2、Uart1 为通信使用 IO 口，demo 固件默认

10、波特率为 9600，8bit，可以在 pc上利用串口工具查看输出的协议。备注二、客户设计硬件时预留接口建议：1 、 jlink 工 具 通 过 swd 接 口 进 行 固 件 烧 写 ， 需 要 使 用 JTAG_TMS/JTAG_TCK/GND/UART0_TX 引脚；UART0_TX 通过上拉进入 Debug 模式，所以最好在 UART0_TX 附近留一个 VDD；2、若 SPI Flash 中已经存在 bootloader 则可通过 UART 接口进行升级（此升级方式可以通过PC 升级，也可以通过主控引脚；升级），需要使用 UART1_TX/UART1_RX3、模块设计需要预留JTAG_

11、TMS/JTAG_TCK/UART1_TX/UART1_RX/UART0_TX/GND/VDD 等；4 、 为 了 后 期 分 析 语 音 识 别 相 关 问 题 ， 请 还 预 留IIS1_SCLK/IIS1_LRCLK/IIS1_SDI/个接口，可以通过留 pad 的方式；5、mic 接入需要区分正负，mic 的+对应语音模块的左声道，如果 mic 接反会导致声音降低严重，影响识别率（尤其是以不容易发音的字开始低很多，例如命令词：取消 xx）。令词，识别会Chipelli Technology Co.,.S. Thisis not to be reproduced, modified, a

12、dapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 8 / 14.2 数据串口协议2.1 通信协议数据格式header1header2ID CMD data1data2checksumendHeader 起始字符 A5FAID：产品 ID，客户可以自定义，暂定为 0Cmd： 指令号码（00 x7F 为 CI1006

13、向外发数据，0 x800 xF0 位外部发命令给 CI，对 CI 进行控制）Data1，data2：指令内容Checksum：Header +ID+cmd+data0+data1 的累加和 End：结束字符2.2 收到的串口协议数据示例红色框内为识别到一个命令词条后的 uart1_tx 的信息，蓝色框内为识别到的词条号码。备注：Chipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in pa

14、rt nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 9 / 14.具体应用协议根据客户需求再做增添和修改。3 语音模块主动外发数据协议以智能管家的 demo 为例，语音模块到外部设备：【针对使用模型】生成令词Chipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in w

15、hole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 10 / 14.命令词headeridcmdIndexIndexcheckend低8位 高8位 智能管家（唤醒）A5FA081010 xxFB打开空调A5FA081020 xxFB关闭空调A5FA081030 xxFB增大风速A5FA081040 xxFB减小风速A5FA081050 xxFB升高一度A5FA081060 xxFB降低一度A5FA081070 xxFB全自

16、动A5FA081080 xxFB制热模式A5FA081090 xxFB制冷模式A5FA0810A0 xxFB送风模式A5FA0810B0 xxFB节能模式A5FA0810C0 xxFB关闭节能模式A5FA0810D0 xxFB除湿模式A5FA0810E0 xxFB关闭除湿A5FA0810F0 xxFB电加热A5FA081100 xxFB关闭电加热A5FA081110 xxFB空气清新A5FA081120 xxFB空气净化A5FA081130 xxFB关闭空气清新A5FA081140 xxFB睡眠模式A5FA081150 xxFB关闭睡眠模式A5FA081160 xxFB定时一小时A5FA081

17、170 xxFB定时两小时A5FA081180 xxFB左右摆动A5FA081190 xxFBChipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 11 / 14.上下摆动A5FA08

18、11A0 xxFB停止摆动A5FA0811B0 xxFB最小风A5FA0811C0 xxFB中等风A5FA0811D0 xxFB高速风A5FA0811E0 xxFB最大风A5FA0811F0 xxFB强劲风A5FA081200 xxFB风小点A5FA081210 xxFB风大点A5FA081220 xxFB十六度A5FA081230 xxFB十七度A5FA081240 xxFB十八度A5FA081250 xxFB十九度A5FA081260 xxFB二十度A5FA081270 xxFB二十一度A5FA081280 xxFB二十二度A5FA081290 xxFB二十三度A5FA0812A0 xxF

19、B二十四度A5FA0812B0 xxFB二十五度A5FA0812C0 xxFB二十六度A5FA0812D0 xxFB二十七度A5FA0812E0 xxFB二十八度A5FA0812F0 xxFB二十九度A5FA081300 xxFB三十度A5FA081310 xxFB打开台灯A5FA081320 xxFB关闭台灯A5FA081330 xxFB最高亮度A5FA081340 xxFB中等亮度A5FA081350 xxFB最低亮度A5FA081360 xxFB调亮一点A5FA081370 xxFB调暗一点A5FA081380 xxFB照明模式A5FA081390 xxFB阅读模式A5FA0813A0

20、xxFB夜灯模式A5FA0813B0 xxFBChipelli Technology Co.,.S. Thisis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 12 / 14.红色模式A5FA0813C0 xxFB绿色模式A5FA0813D0

21、xxFB蓝色模式A5FA0813E0 xxFB彩色模式A5FA0813F0 xxFB打开主卧灯A5FA081400 xxFB关闭主卧灯A5FA081410 xxFB打开花园灯A5FA081420 xxFB关闭花园灯A5FA081430 xxFB打开客房灯A5FA081440 xxFB关闭客房灯A5FA081450 xxFB打开餐厅灯A5FA081460 xxFB关闭餐厅灯A5FA081470 xxFB打开厕所灯A5FA081480 xxFB关闭厕所灯A5FA081490 xxFB打开花园灯A5FA0814A0 xxFB关闭花园灯A5FA0814B0 xxFB打开阳台灯A5FA0814C0 xx

22、FB关闭阳台灯A5FA0814D0 xxFB打开书房灯A5FA0814E0 xxFB关闭书房灯A5FA0814F0 xxFB大声点A5FA081500 xxFB音量增大A5FA081500 xxFB增大音量A5FA081500 xxFB大点声A5FA081500 xxFB小声点A5FA081510 xxFB音量减小A5FA081510 xxFB减小音量A5FA081510 xxFB小点声A5FA081510 xxFB最大声A5FA081520 xxFB音量最大A5FA081520 xxFB最大音量A5FA081520 xxFB最小声A5FA081530 xxFB音量最小A5FA081530 x

23、xFB最小音量A5FA081530 xxFB备注：1、有的板子程序是“退出识别状态”时，不发串口通信内容，这时如果需要，可向要固件进行升级。2、该串口通讯协议可根据客户实际需求再做修改。4 外部控制命令串口通讯协议外部设备到语音模块：Chip. Thiselli Technology Co.,.Sis not to be reproduced, modified, adapted, published,translated in any material form in whole or in part nor disclosed to any third party without the prior writtenpermisof Chip elli Technology Co.,PAGE 13 / 14.功能headerreservedindexreservecheckend打开回显0 xA5FA00 x010 x010 xxFB关闭回显0 xA5FA00 x010 x010 xxFB打开校验0 xA5FA00 x020 x010 xxFB关闭校验0 xA5FA00 x020 x000 xxFB号码 01 的声音0 xA5FA00 x030