《承包商安全培训》PPT课件.ppt

GRACE - Safety Excellence Heading to World ClassHeading to World Class 承包商安全培训 2002. 3. 12 GRACE - Safety Excellence Heading to World ClassHeading to World Class PURPOSE n目的 u保护格雷斯承包商的健康和安全. u确保承包商遵守格雷斯安全要求并承担相关责任. GRACE - Safety Excellence Heading to World ClassHeading to World Class 格雷斯安全方针 u格雷斯安全方针规定: u所有伤害能被预防. u安全工作是所有雇员工作的前提. uManagement must be the leaders in preventing injuries by providing a safe work environment, training and immediate follow-up on any unsafe conditions or actions. uEveryone is responsible for preventing injuries to themselves and others. uAll operating exposures can be safeguarded. uTraining employees to work safely is essential. uPrevention of personal injuries is good business GRACE - Safety Excellence Heading to World ClassHeading to World Class 承包商职责 uThe contractor is fully responsible that his supervisors and workers strictly abide by all applicable safety rules and regulations. uAny contract worker who violates safety rules and regulations is liable to instant dismissal or removal from Grace premise. uThe contractor shall be the only party responsible for any accident resulting from neglecting and/or infringing safety rules and regulations. GRACE - Safety Excellence Heading to World ClassHeading to World Class Safety Awareness nAs you approach each activity or situation, use the following safety cycle to help you evaluate the potential risk of your task. The safety cycle will help you recognize and eliminate unsafe acts and unsafe conditions that could occur as you do your job. nDECIDEMake safety a top priority n STOPGive your full attention to the work area n OBSERVELook for unsafe acts and unsafe conditions n THINKConsider how safety will be affected by what you have observed n ACT Apply good judgement to eliminate unsafe acts and unsafe conditions nRushing through a job doesnt save time in fact it can lead to a lot more lost time than the few seconds it takes to use the safety cycle. uStop Unsafe Acts uExpect the Unexpected uPrevent Injuries GRACE - Safety Excellence Heading to World ClassHeading to World Class Security nAll contractors and their workers shall apply for appropriate gate passes before entering Grace. Grace reserves the right to reject any such applications for security reasons. nGate passes must be worn conspicuously by contractors in Grace at all the time GRACE - Safety Excellence Heading to World ClassHeading to World Class General Safety nSmoking uSmoking is only allowed at the designated smoking areas. nPhotograph Taking uPhotograph taking of any kind is not allowed in Grace without prior authorisation from the second line supervisors. All cameras must be deposited at security guard house. uIf photograph taking is authorised by Grace, the photographer must not take any photograph beyond the area approved. Light Hot Work Permit is required if photograph is taken in the process area. nTraffic uSpeed limit: 15 km/hours. uPark you vehicle at designated parking area. GRACE - Safety Excellence Heading to World ClassHeading to World Class Personal Protective Equipment (PPE) nMinimum PPEs at Process Areas and Tank Farm: Safety shoes, safety glasses and hard hats nOther PPEs nEar protector is applicable at any areas where noise level is above 85 dB(A) nFace shield shall be used when transferring corrosive chemicals or doing grinding job. Welding helmet shall be worn when a contractor perform welding work. nProper respirator shall be used when contractor are exposed to respiratory hazards such as dusts or chemical vapors. nFall protection shall be used when contractors work at height of 1.2 meters or above without proper handhold or foothold. nProper safety gloves shall be used when handling chemicals, abrasion hazards, electrical hazards nOthers as required on the job basis uAll PPEs shall be in good conditions GRACE - Safety Excellence Heading to World ClassHeading to World Class Incident Reporting nIt is the Grace policy to report all incidents at Grace premises. Those incidents includes: nLoss time incidents/recordable incidents nFirst aid cases nEnvironmental incident (any chemical release or spills) nFire incident nNear miss nAny other incidents result in property loss of the facility. nAll incidents shall be reported to Grace Plant Manager. Proper incident investigation shall be followed up. GRACE - Safety Excellence Heading to World ClassHeading to World Class Emergency Response nAn emergency alarm (sounding of an alarm in the building/plant) and PA system are used for all emergencies: fire, medical or environmental nAll personnel must be prepared to respond properly in evacuation situations at the site. nWhen You Discover an Emergency such as a fire, medical, or environmental incident occurs in your building or area, you must: If you are trained and you are not in danger, put out fire immediately Report to your superior immediately Activate alarming device (break glass) Call the Site Incident Commander (if you dont know, call security) Alert all personnel in the area Evacuate the area GRACE - Safety Excellence Heading to World ClassHeading to World Class Emergency Response uWhen You Hear an Emergency Alarm FSecure equipment per local rules (if possible) FLeave area as specified FReport to the designated assembly point as quickly as possible in accordance with the sites Emergency Plan. uAssembly Points FOutside of front gate FNext to back gate FGrace employee who sponsors the contractor is responsible for head counting for the contractors. GRACE - Safety Excellence Heading to World ClassHeading to World Class PERMITS & LOCKOUT/TAGOUT nContractors must strictly abide by Grace Work Permit System for all construction, maintenance and repair work in Grace to ensure safety of all personnel, prevent the occurrence of fire or accident, and protect plant and process equipment. nAll contractors must obtain a proper work permit/s prior to the starting of their job. A proper work plan shall be submitted when applying a Work Permit, if necessary. nAll contractors must ensure that their staff and workers, understand and comply with the Permits system and all related Grace procedures and guidelines to safeguard workers occupational safety and health. If a contractor goes beyond the work scope described in the Work Permit, he need re-apply a work permit. nAll contractors must strictly follow Grace Lockout/Tagout procedures. nOther important permits include hot work permit and confined space entry permit nViolation of Permits & Lockout/Tagout Procedures is serious offence. GRACE - Safety Excellence Heading to World ClassHeading to World Class Housekeeping nHousekeeping is an indication of the level of safety awareness within a facility. Usually, if employees within a facility take enough pride in their work to keep the facility clean, the employees also focus on unsafe actions. nHere are some guidelines: Work areas need must be free from trash and debris Walking surfaces must be free from tripping, slipping and stumbling hazards Work and equipment storage areas must be free from disorder Aisles must be marked and kept clear Stairwells must be well-lighted and should be clean, free of any extraneous items and never used for storage of any kind Use signs to warn of hazards Housekeeping is part of your job since it is a key component of safe workplace. nEach employee has the responsibility to leave their jobsite in a clean, orderly and safe conditionContractors GRACE - Safety Excellence Heading to World ClassHeading to World Class Hazard Communication nA material safety data sheet (MSDS) containing the proper hazard communications da