zch双头螺栓的修复性安装

1、双头螺栓的修复性安装Repair mounting stud bolts in blade检查项目和规范：Check-item and specification:由现场填写To be filled in by the site已校准设备Calibrated equipment位置.nr设备描述（类型、名称等）Description of equipment(Type ,name,etc)设备校准号Equipment calibration number123456789101112在上面的列表中详列设备，随后使用该设备时参考其位置。Specify equipment in list abov

2、e, and subsequently refer to theNo, when the equipment is used客户/业主：Customer/owner:安装公司：Installation Company：轮毂：Hub No:机舱：Nacelle No:参照 海上 G4 MK lll R14 装配说明Reference is made to Assembly Instruction f4 MK III R14 OffshoreECN 253458 PTL 2016.04.12已校准设备位置： Cal. equipment完成日期（日/月/年） Date completed安装 签字

3、installer signature监督签字 Supervisor signature. no:叶片检查Blade inspection1检查叶片A,B,C是附带检查表交付的且对螺栓已紧固在卡箍处打标记Checkt blade A, B and C are delivered with checklists with signed-off on boltshe Tip-clare tightened2叶片A：Blade A:写下双头螺栓批次号 Note batch number for stud bolts: 3叶片B：Blade B:写下双头螺栓批次号 Note batch number

4、for stud bolts: 4叶片C：Blade C:写下双头螺栓批次号Note batch number for stud bolts: 叶片检查 Blade inspection5检查双头螺栓在使用了乐泰螺纹紧固剂（50mm线）Checkt stud bolts are appd with Lock-tithe blade end (50mm thread).检查项目和规范：Check-item and specification:由现场填写To be filled in by the site已校准设备位置： Cal. equipment完成日期（日/月/年） Date comple

5、ted安装 签字installer signature监督签字 Supervisor signature. no:6检查双头螺栓在轮毂尾处使用了Never-seez润滑剂(150mm线)Checkt the stud bolts are appd with Nerver-seez at the hub end (150mm thread)7检查修复性的双头螺栓紧固Checkt the repair mounted stud bolts are tightened8当双头螺栓已被正确安装时，确认O型圈被推入叶片大约2mmCheckt the O-ring is pushed approximay

6、 2mmo the hole on the blade, when the stud bolts have been correctly fitted备注：Remarks 双头螺栓的修复性安装。Repair mounting stud bolts in blade全部完成，ZCH 完成。Completed, ZCH complete.监督员签字： 日期： Supervisor signatureDate安装签字： 日期： Installation Signature：Date备注:检查表必须在安装或调试过程阶段进行填写,严禁提前填写或后补,特此.Note: The checklist must be f