刀片槽形选择和介绍.ppt

1、山特维克可乐满车镗刀片断屑槽,apDepth of cut (inches),fnFeed (inches/rev),vcCutting speed (surface feet/min),Machining conditions,Application type,Product-specific cutting data,Complete information on CoroKey label for correct application of insert,Workpiece materials,1,2,3,Easy to use,Easy to Choose. Easy to Use.

2、TM,Steel,Stainless Steel,Cast Iron,Ft,Time,Ft,Time,Ft,Time,Cutting forces in various materials,1,Basic types of chip formations,Steel Long chipping Stainless steel Lamellar chipping Titanium Segmental chipping Cast irons Short chipping,2,3,4,杠杆夹紧的零度后角刀片断屑槽,杠杆夹紧的零度后角刀片断屑槽,杠杆夹紧的零度后角刀片断屑槽,杠杆夹紧的零度后角刀片断屑

3、槽,杠杆夹紧的零度后角刀片断屑槽,杠杆夹紧的零度后角刀片断屑槽,锣钉夹紧的有后角的刀片断屑槽,锣钉夹紧的有后角的刀片断屑槽,锣钉夹紧的有后角的刀片断屑槽,锣钉夹紧的有后角的刀片断屑槽,Workpiece materials,Application type,Machining conditions,Steel,Cast iron,Stainless steel,Roughing,Medium machining,Finishing,=Good conditions Continuous cuts Stable conditions,=Average conditions,=Difficult

4、conditions Interrupted cuts or heavy roughing.,1,Easy to chooseThe path to productive turning,2,3,ap Depth of cut (inch),fn Feed, in/rev,Geometry,Edge,GC3005,Grade,Insert type,Nose radius,Easy identification with permanent insert marking,Make use of the tools,Utilize the potential ofap- to reduce number or cuts fn- for shorter cutting time vc- for best tool life Compensation of cuttingspeed for tool life,Application range,Speed range,10 min. tool life15 min. tool life30 min. tool life,Th